ASIC Implementation Comparison of SIC and LSD Receivers for MIMO-OFDM

MIMO-OFDM receivers with horizontal encoding are considered in this paper. The successive interference cancellation (SIC) algorithm is compared to the K-best list sphere detector (LSD). A modification to the K-best LSD algorithm is introduced. The SIC and K-best LSD receivers are designed for a 2 x 2 antenna system with 64-quadrature amplitude modulation (QAM). The ASIC implementation results for both architectures are presented. The K-best LSD outperforms the SIC receiver in bad channel conditions but the SIC receiver performs better in channels with less correlated MIMO streams. The latency of the K-best LSD is large due to the high modulation order and list size. The throughput of the SIC receiver is more than 6 times higher than that of the K-best LSD.TekesFinnish Funding Agency for Technology and InnovationNokiaTexas InstrumentsNokia Siemens Networks (NSN)Elekrobi

Performance - Complexity Comparison of Receivers for a LTE MIMO–OFDM System

Implementation of receivers for spatial multiplexing multiple-input multiple-output (MIMO) orthogonal-frequency-division-multiplexing (OFDM) systems is considered. The linear minimum mean-square error (LMMSE) and the K-best list sphere detector (LSD) are compared to the iterative successive interference cancellation (SIC) detector and the iterative K-best LSD. The performance of the algorithms is evaluated in 3G long-term evolution (LTE) system. The SIC algorithm is found to perform worse than the K-best LSD when the MIMO channels are highly correlated, while the performance difference diminishes when the correlation decreases. The receivers are designed for 2X2 and 4X4 antenna systems and three different modulation schemes. Complexity results for FPGA and ASIC implementations are found. A modification to the K-best LSD which increases its detection rate is introduced. The ASIC receivers are designed to meet the decoding throughput requirements in LTE and the K-best LSD is found to be the most complex receiver although it gives the best reliable data transmission throughput. The SIC receiver has the best performance–complexity tradeoff in the 2X2 system but in the 4X4 case, the K-best LSD is the most efficient. A receiver architecture which could be reconfigured to using a simple or a more complex detector as the channel conditions change would achieve the best performance while consuming the least amount of power in the receiver

Receiver Implementation for MIMO-OFDM with AMC and Precoding

Receivers for horizontally encoded LTE based MIMO-OFDM systems are considered in this paper. Adaptive modulation and coding (AMC) is used as well as precoding. The linear minimum mean square error (LMMSE), successive interference cancellation (SIC) and K-best list sphere detectors (LSD) are compared. The receivers were designed and implemented for 2×2 and 4×4 antenna systems and meet the decoding rate requirement in LTE, i.e, 210 Mb/s in 2×2 and 405 Mb/s in 4×4 antenna systems. The results show that the performance of the receivers is similar in low SNR but the performance difference increases when a higher rank transmission is used. The K-best LSD has the highest performance and complexity. A simpler receiver could be used in the low SNRs to save power and a more complex receiver in the high SNRs when a higher goodput is needed.NokiaNokia Siemens Networks (NSN)Texas InstrumentsXilinxNational Science Foundatio

A selective control information detection scheme for OFDM receivers

In wireless communications, both control information and payload (user-data) are concurrently transmitted and required to be successfully recovered. This paper focuses on block-level detection, which is applicable for detecting transmitted control information, particularly when this information is selected or chosen from a finite set of information that are known at both transmitting and receiving devices. Using an orthogonal frequency division multiplexing architecture, this paper investigates and evaluates the performance of a time-domain decision criterion in comparison with a form of Maximum Likelihood (ML) estimation method. Unlike the ML method, the proposed time-domain detection technique requires no channel estimation as it uses the correlation (in the time-domain) that exists between the received and the transmitted selective information as a means of detection. In comparison with the ML method, results show that the proposed method offers improved detection performance, particularly when the control information consists of at least 16. However, the implementation of the proposed method requires a slightly increased number of mathematical computations

Design and Implementation of Efficient Algorithms for Wireless MIMO Communication Systems

En la última década, uno de los avances tecnológicos más importantes que han hecho culminar la nueva generación de banda ancha inalámbrica es la comunicación mediante sistemas de múltiples entradas y múltiples salidas (MIMO). Las tecnologías MIMO han sido adoptadas por muchos estándares inalámbricos tales como LTE, WiMAS y WLAN. Esto se debe principalmente a su capacidad de aumentar la máxima velocidad de transmisión , junto con la fiabilidad alcanzada y la cobertura de las comunicaciones inalámbricas actuales sin la necesidad de ancho de banda extra ni de potencia de transmisión adicional. Sin embargo, las ventajas proporcionadas por los sistemas MIMO se producen a expensas de un aumento sustancial del coste de implementación de múltiples antenas y de la complejidad del receptor, la cual tiene un gran impacto sobre el consumo de energía. Por esta razón, el diseño de receptores de baja complejidad es un tema importante que se abordará a lo largo de esta tesis. En primer lugar, se investiga el uso de técnicas de preprocesado de la matriz de canal MIMO bien para disminuir el coste computacional de decodificadores óptimos o bien para mejorar las prestaciones de detectores subóptimos lineales, SIC o de búsqueda en árbol. Se presenta una descripción detallada de dos técnicas de preprocesado ampliamente utilizadas: el método de Lenstra, Lenstra, Lovasz (LLL) para lattice reduction (LR) y el algorimo VBLAST ZF-DFE. Tanto la complejidad como las prestaciones de ambos métodos se han evaluado y comparado entre sí. Además, se propone una implementación de bajo coste del algoritmo VBLAST ZF-DFE, la cual se incluye en la evaluación. En segundo lugar, se ha desarrollado un detector MIMO basado en búsqueda en árbol de baja complejidad, denominado detector K-Best de amplitud variable (VB K-Best). La idea principal de este método es aprovechar el impacto del número de condición de la matriz de canal sobre la detección de datos con el fin de disminuir la complejidad de los sistemasRoger Varea, S. (2012). Design and Implementation of Efficient Algorithms for Wireless MIMO Communication Systems [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/16562Palanci