Generic Connectivity-Based CGRA Mapping via Integer Linear Programming

Coarse-grained reconfigurable architectures (CGRAs) are programmable logic devices with large coarse-grained ALU-like logic blocks, and multi-bit datapath-style routing. CGRAs often have relatively restricted data routing networks, so they attract CAD mapping tools that use exact methods, such as Integer Linear Programming (ILP). However, tools that target general architectures must use large constraint systems to fully describe an architecture's flexibility, resulting in lengthy run-times. In this paper, we propose to derive connectivity information from an otherwise generic device model, and use this to create simpler ILPs, which we combine in an iterative schedule and retain most of the exactness of a fully-generic ILP approach. This new approach has a speed-up geometric mean of 5.88x when considering benchmarks that do not hit a time-limit of 7.5 hours on the fully-generic ILP, and 37.6x otherwise. This was measured using the set of benchmarks used to originally evaluate the fully-generic approach and several more benchmarks representing computation tasks, over three different CGRA architectures. All run-times of the new approach are less than 20 minutes, with 90th percentile time of 410 seconds. The proposed mapping techniques are integrated into, and evaluated using the open-source CGRA-ME architecture modelling and exploration framework.Comment: 8 pages of content; 8 figures; 3 tables; to appear in FCCM 2019; Uses the CGRA-ME framework at http://cgra-me.ece.utoronto.ca

Compiler and Architecture Design for Coarse-Grained Programmable Accelerators

abstract: The holy grail of computer hardware across all market segments has been to sustain performance improvement at the same pace as silicon technology scales. As the technology scales and the size of transistors shrinks, the power consumption and energy usage per transistor decrease. On the other hand, the transistor density increases significantly by technology scaling. Due to technology factors, the reduction in power consumption per transistor is not sufficient to offset the increase in power consumption per unit area. Therefore, to improve performance, increasing energy-efficiency must be addressed at all design levels from circuit level to application and algorithm levels. At architectural level, one promising approach is to populate the system with hardware accelerators each optimized for a specific task. One drawback of hardware accelerators is that they are not programmable. Therefore, their utilization can be low as they perform one specific function. Using software programmable accelerators is an alternative approach to achieve high energy-efficiency and programmability. Due to intrinsic characteristics of software accelerators, they can exploit both instruction level parallelism and data level parallelism. Coarse-Grained Reconfigurable Architecture (CGRA) is a software programmable accelerator consists of a number of word-level functional units. Motivated by promising characteristics of software programmable accelerators, the potentials of CGRAs in future computing platforms is studied and an end-to-end CGRA research framework is developed. This framework consists of three different aspects: CGRA architectural design, integration in a computing system, and CGRA compiler. First, the design and implementation of a CGRA and its instruction set is presented. This design is then modeled in a cycle accurate system simulator. The simulation platform enables us to investigate several problems associated with a CGRA when it is deployed as an accelerator in a computing system. Next, the problem of mapping a compute intensive region of a program to CGRAs is formulated. From this formulation, several efficient algorithms are developed which effectively utilize CGRA scarce resources very well to minimize the running time of input applications. Finally, these mapping algorithms are integrated in a compiler framework to construct a compiler for CGRADissertation/ThesisDoctoral Dissertation Computer Science 201

Compiler Discovered Dynamic Scheduling of Irregular Code in High-Level Synthesis

Dynamically scheduled high-level synthesis (HLS) achieves higher throughput than static HLS for codes with unpredictable memory accesses and control flow. However, excessive dataflow scheduling results in circuits that use more resources and have a slower critical path, even when only a part of the circuit exhibits dynamic behavior. Recent work has shown that marking parts of a dataflow circuit for static scheduling can save resources and improve performance (hybrid scheduling), but the dynamic part of the circuit still bottlenecks the critical path. We propose instead to selectively introduce dynamic scheduling into static HLS. This paper presents an algorithm for identifying code regions amenable to dynamic scheduling and shows a methodology for introducing dynamically scheduled basic blocks, loops, and memory operations into static HLS. Our algorithm is informed by modulo-scheduling and can be integrated into any modulo-scheduled HLS tool. On a set of ten benchmarks, we show that our approach achieves on average an up to 3.7$\times$ and 3$\times$ speedup against dynamic and hybrid scheduling, respectively, with an area overhead of 1.3$\times$ and frequency degradation of 0.74$\times$ when compared to static HLS.Comment: To appear in the 33rd International Conference on Field-Programmable Logic and Applications (2023

On Extracting Course-Grained Function Parallelism from C Programs

To efficiently utilize the emerging heterogeneous multi-core architecture, it is essential to exploit the inherent coarse-grained parallelism in applications. In addition to data parallelism, applications like telecommunication, multimedia, and gaming can also benefit from the exploitation of coarse-grained function parallelism. To exploit coarse-grained function parallelism, the common wisdom is to rely on programmers to explicitly express the coarse-grained data-flow between coarse-grained functions using data-flow or streaming languages. This research is set to explore another approach to exploiting coarse-grained function parallelism, that is to rely on compiler to extract coarse-grained data-flow from imperative programs. We believe imperative languages and the von Neumann programming model will still be the dominating programming languages programming model in the future. This dissertation discusses the design and implementation of a memory data-flow analysis system which extracts coarse-grained data-flow from C programs. The memory data-flow analysis system partitions a C program into a hierarchy of program regions. It then traverses the program region hierarchy from bottom up, summarizing the exposed memory access patterns for each program region, meanwhile deriving a conservative producer-consumer relations between program regions. An ensuing top-down traversal of the program region hierarchy will refine the producer-consumer relations by pruning spurious relations. We built an in-lining based prototype of the memory data-flow analysis system on top of the IMPACT compiler infrastructure. We applied the prototype to analyze the memory data-flow of several MediaBench programs. The experiment results showed that while the prototype performed reasonably well for the tested programs, the in-lining based implementation may not efficient for larger programs. Also, there is still room in improving the effectiveness of the memory data-flow analysis system. We did root cause analysis for the inaccuracy in the memory data-flow analysis results, which provided us insights on how to improve the memory data-flow analysis system in the future

Twill: A Hybrid Microcontroller-FPGA Framework for Parallelizing Single- Threaded C Programs

Increasingly System-On-A-Chip platforms which incorporate both micropro- cessors and re-programmable logic are being utilized across several fields ranging from the automotive industry to network infrastructure. Unfortunately, the de- velopment tools accompanying these products leave much to be desired, requiring knowledge of both traditional embedded systems languages like C and hardware description languages like Verilog. We propose to bridge this gap with Twill, a truly automatic hybrid compiler that can take advantage of the parallelism inherent in these platforms. Twill can extract long-running threads from single threaded C code and distribute these threads across the hardware and software domains to more fully utilize the asymmetric characteristics between processors and the embedded reconfigurable logic fabric. We show that Twill provides a sig- nificant performance increase on the CHStone benchmarks with an average 1.63 times increase over the pure hardware approach and an increase of 22.2 times on average over the pure software approach while reducing the area required by the reconfigurable logic by on average 1.73 times compared to the pure hardware approach

Design and development from single core reconfigurable accelerators to a heterogeneous accelerator-rich platform

The performance of a platform is evaluated based on its ability to deal with the processing of multiple applications of different nature. In this context, the platform under evaluation can be of homogeneous, heterogeneous or of hybrid architecture. The selection of an architecture type is generally based on the set of different target applications and performance parameters, where the applications can be of serial or parallel nature. The evaluation is normally based on different performance metrics, e.g., resource/area utilization, execution time, power and energy consumption. This process can also include high-level performance metrics, e.g., Operations Per Second (OPS), OPS/Watt, OPS/Hz, Watt/Area etc. An example of architecture selection can be related to a wireless communication system where the processing of computationally-intensive signal-processing algorithms has strict execution-time constraints and in this case, a platform with special-purpose accelerators is relatively more suitable than a typical homogeneous platform. A couple of decades ago, it was expensive to plant many special-purpose accelerators on a chip as the cost per unit area was relatively higher than today. The utilization wall is also becoming a limiting factor in homogeneous multicore scaling which means that all the cores on a platform cannot be operated at their maximum frequency due to a possible thermal meltdown. In this case, some of the processing cores have to be turned-off or to be operated at very low frequencies making most of the part of the chip to stay underutilized. A possible solution lies in the use of heterogeneous multicore platforms where many application-specific cores operate at lower frequencies, therefore reducing power dissipation density and increasing other performance parameters. However, to achieve maximum flexibility in processing, a general-purpose flavor can also be introduced by adding a few Reduced Instruction-Set Computing (RISC) cores. A power class of heterogeneous multicore platforms is an accelerator-rich platform where many application-specific accelerators are loosely connected with each other for work load distribution or to execute the tasks independently. This research work spans from the design and development of three different types of template-based Coarse-Grain Reconfigurable Arrays (CGRAs), i.e., CREMA, AVATAR and SCREMA to a Heterogeneous Accelerator-Rich Platform (HARP). The accelerators generated from the three CGRAs could perform different lengths and types of Fast Fourier Transform (FFT), real and complex Matrix-Vector Multiplication (MVM) algorithms. CREMA and AVATAR were fixed CGRAs with eight and sixteen number of Processing Element (PE) columns, respectively. SCREMA could flex between four, eight, sixteen and thirty two number of PE columns. Many case studies were conducted to evaluate the performance of the reconfigurable accelerators generated from these CGRA templates. All of these CGRAs work in a processor/coprocessor model tightly integrated with a Direct Memory Access (DMA) device. Apart from these platforms, a reconfigurable Application-Specific Instruction-set Processor (rASIP) is also designed, tested for FFT execution under IEEE-802.11n timing constraints and evaluated against a processor/coprocessor model. It was designed by integrating AVATAR generated radix-(2, 4) FFT accelerator into the datapath of a RISC processor. The instruction set of the RISC processor was extended to perform additional operations related to AVATAR. As mentioned earlier, the underutilized part of the chip, now-a-days called Dark Silicon is posing many challenges for the designers. Apart from software optimizations, clock gating, dynamic voltage/frequency scaling and other high-level techniques, one way of dealing with this problem is to use many application-specific cores. In an effort to maximize the number of reconfigurable processing resources on a platform, the accelerator-rich architecture HARP was designed and evaluated in terms of different performance metrics. HARP is constructed on a Network-on-Chip (NoC) of 3x3 nodes where with every node, a CGRA of application-specific size is integrated other than the central node which is attached to a RISC processor. The RISC establishes synchronization between the nodes for data transfer and also performs the supervisory control. While using the NoC as the backbone of communication between the cores, it becomes possible for all the cores to address each other and also perform execution simultaneously and independently of each other. The performance of accelerators generated from CREMA, AVATAR and SCREMA templates were evaluated individually and also when attached to HARP's NoC nodes. The individual CGRAs show promising results in their own capacity but when integrated all together in the framework of HARP, interesting comparisons were established in terms of overall execution times, resource utilization, operating frequencies, power and energy consumption. In evaluating HARP, estimates and measurements were also made in some advanced performance metrics, e.g., in MOPS/mW and MOPS/MHz. The overall research work promotes the idea of heterogeneous accelerator-rich platform as a solution to current problems and future needs of industry and academia

3rd Many-core Applications Research Community (MARC) Symposium. (KIT Scientific Reports ; 7598)

This manuscript includes recent scientific work regarding the Intel Single Chip Cloud computer and describes approaches for novel approaches for programming and run-time organization

High-level synthesis of dataflow programs for heterogeneous platforms:design flow tools and design space exploration

The growing complexity of digital signal processing applications implemented in programmable logic and embedded processors make a compelling case the use of high-level methodologies for their design and implementation. Past research has shown that for complex systems, raising the level of abstraction does not necessarily come at a cost in terms of performance or resource requirements. As a matter of fact, high-level synthesis tools supporting such a high abstraction often rival and on occasion improve low-level design. In spite of these successes, high-level synthesis still relies on programs being written with the target and often the synthesis process, in mind. In other words, imperative languages such as C or C++, most used languages for high-level synthesis, are either modified or a constrained subset is used to make parallelism explicit. In addition, a proper behavioral description that permits the unification for hardware and software design is still an elusive goal for heterogeneous platforms. A promising behavioral description capable of expressing both sequential and parallel application is RVC-CAL. RVC-CAL is a dataflow programming language that permits design abstraction, modularity, and portability. The objective of this thesis is to provide a high-level synthesis solution for RVC-CAL dataflow programs and provide an RVC-CAL design flow for heterogeneous platforms. The main contributions of this thesis are: a high-level synthesis infrastructure that supports the full specification of RVC-CAL, an action selection strategy for supporting parallel read and writes of list of tokens in hardware synthesis, a dynamic fine-grain profiling for synthesized dataflow programs, an iterative design space exploration framework that permits the performance estimation, analysis, and optimization of heterogeneous platforms, and finally a clock gating strategy that reduces the dynamic power consumption. Experimental results on all stages of the provided design flow, demonstrate the capabilities of the tools for high-level synthesis, software hardware Co-Design, design space exploration, and power optimization for reconfigurable hardware. Consequently, this work proves the viability of complex systems design and implementation using dataflow programming, not only for system-level simulation but real heterogeneous implementations

Dynamic task scheduling and binding for many-core systems through stream rewriting

This thesis proposes a novel model of computation, called stream rewriting, for the specification and implementation of highly concurrent applications. Basically, the active tasks of an application and their dependencies are encoded as a token stream, which is iteratively modified by a set of rewriting rules at runtime. In order to estimate the performance and scalability of stream rewriting, a large number of experiments have been evaluated on many-core systems and the task management has been implemented in software and hardware.In dieser Dissertation wurde Stream Rewriting als eine neue Methode entwickelt, um Anwendungen mit einer großen Anzahl von dynamischen Tasks zu beschreiben und effizient zur Laufzeit verwalten zu können. Dabei werden die aktiven Tasks in einem Datenstrom verpackt, der zur Laufzeit durch wiederholtes Suchen und Ersetzen umgeschrieben wird. Um die Performance und Skalierbarkeit zu bestimmen, wurde eine Vielzahl von Experimenten mit Many-Core-Systemen durchgeführt und die Verwaltung von Tasks über Stream Rewriting in Software und Hardware implementiert

Aspects of Code Generation and Data Transfer Techniques for Modern Parallel Architectures

Im Bereich der Prozessorarchitekturen hat sich der Fokus neuer Entwicklungen von immer höheren Taktfrequenzen hin zu immer mehr Kernen auf einem Chip verschoben. Eine hohe Kernanzahl ermöglicht es unterschiedlich leistungsfähige Kerne anzubieten, und sogar dedizierte Kerne mit speziellen Befehlssätzen. Die Entwicklung für solch heterogene Plattformen ist herausfordernd und benötigt entsprechende Unterstützung von Entwicklungswerkzeugen, wie beispielsweise Übersetzern. Neben ihrer heterogenen Kernstruktur gibt es eine zweite Dimension, die die Entwicklung für solche Architekturen anspruchsvoll macht: ihre Speicherstruktur. Die Aufrechterhaltung von globaler Cache-Kohärenz erschwert das Erreichen hoher Kernzahlen. Hardwarebasierte Cache-Kohärenz-Protokolle skalieren entweder schlecht, oder sind kompliziert und führen zu Problemen bei Ausführungszeit und Energieeffizienz. Eine radikale Lösung dieses Problems stellt die Abschaffung der globalen Cache-Kohärenz dar. Jedoch ist es schwierig, bestehende Programmiermodelle effizient auf solch eine Hardware-Architektur mit schwachen Garantien abzubilden. Der erste Teil dieser Dissertation beschäftigt sich Datentransfertechniken für nicht-cache-kohärente Architekturen mit gemeinsamem Speicher. Diese Architekturen bieten einen gemeinsamen physikalischen Adressraum, implementieren aber keine hardwarebasierte Kohärenz zwischen allen Caches des Systems. Die logische Partitionierung des gemeinsamen Speichers ermöglicht die sichere Programmierung einer solchen Plattform. Im Allgemeinen erzeugt dies die Notwendigkeit Daten zwischen Speicherpartitionen zu kopieren. Wir untersuchen die Übersetzung für invasive Architekturen, einer Familie von nicht-cache-kohärenten Vielkernarchitekturen. Wir betrachten die effiziente Implementierung von Datentransfers sowohl einfacher als auch komplexer Datenstrukturen auf invasiven Architekturen. Insbesondere schlagen wir eine neuartige Technik zum Kopieren komplexer verzeigerter Datenstrukturen vor, die ohne Serialisierung auskommt. Hierzu verallgemeinern wir den Objekt-Klon-Ansatz mit übersetzergesteuerter automatischer software-basierter Kohärenz, sodass er auch im Kontext nicht-kohärenter Caches funktioniert. Wir präsentieren Implementierungen mehrerer Datentransfertechniken im Rahmen eines existierenden Übersetzers und seines Laufzeitsystems. Wir führen eine ausführliche Auswertung dieser Implementierungen auf einem FPGA-basierten Prototypen einer invasiven Architektur durch. Schließlich schlagen wir vor, Hardwareunterstützung für bereichsbasierte Cache-Operationen hinzuzufügen und beschreiben und bewerten mögliche Implementierungen und deren Kosten. Der zweite Teil dieser Dissertation befasst sich mit der Beschleunigung von Shuffle-Code, der bei der Registerzuteilung auftritt, durch die Verwendung von Permutationsbefehlen. Die Aufgabe der Registerzuteilung während der Programmübersetzung ist die Abbildung von Programmvariablen auf Maschinenregister. Während der Registerzuteilung erzeugt der Übersetzer Shuffle-Code, der aus Kopier- und Tauschbefehlen besteht, um Werte zwischen Registern zu transferieren. Abhängig von der Qualität der Registerzuteilung und der Zahl der verfügbaren Register kann eine große Menge an Shuffle-Code erzeugt werden. Wir schlagen vor, die Ausführung von Shuffle-Code mit Hilfe von neuartigen Permutationsbefehlen zu beschleunigen, die die Inhalte von einigen Registern in einem Taktzyklus beliebig permutieren. Um die Machbarkeit dieser Idee zu demonstrieren, erweitern wir zunächst ein bestehendes RISC-Befehlsformat um Permutationsbefehle. Anschließend beschreiben wir, wie die vorgeschlagenen Permutationsbefehle in einer bestehenden RISC-Architektur implementiert werden können. Dann entwickeln wir zwei Verfahren zur Codeerzeugung, die die Permutationsbefehle ausnutzen, um Shuffle-Code zu beschleunigen: eine schnelle Heuristik und einen auf dynamischer Programmierung basierenden optimalen Ansatz. Wir beweisen Qualitäts- und Korrektheitseingeschaften beider Ansätze und zeigen die Optimalität des zweiten Ansatzes. Im Folgenden implementieren wir beide Codeerzeugungsverfahren in einem Übersetzer und untersuchen sowie vergleichen deren Codequalität ausführlich mit Hilfe standardisierter Benchmarks. Zunächst messen wir die genaue Zahl der dynamisch ausgeführten Befehle, welche wir folgend validieren, indem wir Programmlaufzeiten auf einer FPGA-basierten Prototypimplementierung der um Permutationsbefehle erweiterten RISC-Architektur messen. Schließlich argumentieren wir, dass Permutationsbefehle auf modernen Out-Of-Order-Prozessorarchitekturen, die bereits Registerumbenennung unterstützen, mit wenig Aufwand implementierbar sind