Reliability-aware and energy-efficient system level design for networks-on-chip

2015 Spring.Includes bibliographical references.With CMOS technology aggressively scaling into the ultra-deep sub-micron (UDSM) regime and application complexity growing rapidly in recent years, processors today are being driven to integrate multiple cores on a chip. Such chip multiprocessor (CMP) architectures offer unprecedented levels of computing performance for highly parallel emerging applications in the era of digital convergence. However, a major challenge facing the designers of these emerging multicore architectures is the increased likelihood of failure due to the rise in transient, permanent, and intermittent faults caused by a variety of factors that are becoming more and more prevalent with technology scaling. On-chip interconnect architectures are particularly susceptible to faults that can corrupt transmitted data or prevent it from reaching its destination. Reliability concerns in UDSM nodes have in part contributed to the shift from traditional bus-based communication fabrics to network-on-chip (NoC) architectures that provide better scalability, performance, and utilization than buses. In this thesis, to overcome potential faults in NoCs, my research began by exploring fault-tolerant routing algorithms. Under the constraint of deadlock freedom, we make use of the inherent redundancy in NoCs due to multiple paths between packet sources and sinks and propose different fault-tolerant routing schemes to achieve much better fault tolerance capabilities than possible with traditional routing schemes. The proposed schemes also use replication opportunistically to optimize the balance between energy overhead and arrival rate. As 3D integrated circuit (3D-IC) technology with wafer-to-wafer bonding has been recently proposed as a promising candidate for future CMPs, we also propose a fault-tolerant routing scheme for 3D NoCs which outperforms the existing popular routing schemes in terms of energy consumption, performance and reliability. To quantify reliability and provide different levels of intelligent protection, for the first time, we propose the network vulnerability factor (NVF) metric to characterize the vulnerability of NoC components to faults. NVF determines the probabilities that faults in NoC components manifest as errors in the final program output of the CMP system. With NVF aware partial protection for NoC components, almost 50% energy cost can be saved compared to the traditional approach of comprehensively protecting all NoC components. Lastly, we focus on the problem of fault-tolerant NoC design, that involves many NP-hard sub-problems such as core mapping, fault-tolerant routing, and fault-tolerant router configuration. We propose a novel design-time (RESYN) and a hybrid design and runtime (HEFT) synthesis framework to trade-off energy consumption and reliability in the NoC fabric at the system level for CMPs. Together, our research in fault-tolerant NoC routing, reliability modeling, and reliability aware NoC synthesis substantially enhances NoC reliability and energy-efficiency beyond what is possible with traditional approaches and state-of-the-art strategies from prior work

Concurrent Specification of Embedded Systems: An Insight into the Flexibility vs Correctness Trade-Off

Diseases & disorder

Distributed real-time operating system (DRTOS) modeling in SpecC

System level design of an embedded computing system involves a multi-step process to refine the system from an abstract specification to an actual implementation by defining and modeling the system at various levels of abstraction. System level design supports evaluating and optimizing the system early in design exploration.;Embedded computing systems may consist of multiple processing elements, memories, I/O devices, sensors, and actors. The selection of processing elements includes instruction-set processors and custom hardware units, such as application specific integrated circuit (ASIC) and field programmable gate array (FPGA). Real-time operating systems (RTOS) have been used in embedded systems as an industry standard for years and can offer embedded systems the characteristics such as concurrency and time constraints. Some of the existing system level design languages, such as SpecC, provide the capability to model an embedded system including an RTOS for a single processor. However, there is a need to develop a distributed RTOS modeling mechanism as part of the system level design methodology due to the increasing number of processing elements in systems and to embedded platforms having multiple processors. A distributed RTOS (DRTOS) provides services such as multiprocessor tasks scheduling, interprocess communication, synchronization, and distributed mutual exclusion, etc.;In this thesis, we develop a DRTOS model as the extension of the existing SpecC single RTOS model to provide basic functionalities of a DRTOS implementation, and present the refinement methodology for using our DRTOS model during system level synthesis. The DRTOS model and refinement process are demonstrated in the SpecC SCE environment. The capabilities and limitations of the DRTOS modeling approach are presented

Bridging MoCs in SystemC specifications of heterogeneous systems

In order to get an efficient specification and simulation of a heterogeneous system, the choice of an appropriate model of computation (MoC) for each system part is essential. The choice depends on the design domain (e.g., analogue or digital), and the suitable abstraction level used to specify and analyse the aspects considered to be important in each system part. In practice, MoC choice is implicitly made by selecting a suitable language and a simulation tool for each system part. This approach requires the connection of different languages and simulation tools when the specification and simulation of the system are considered as a whole. SystemC is able to support a more unified specification methodology and simulation environment for heterogeneous system, since it is extensible by libraries that support additional MoCs. A major requisite of these libraries is to provide means to connect system parts which are specified using different MoCs. However, these connection means usually do not provide enough flexibility to select and tune the right conversion semantic in amixed-level specification, simulation, and refinement process. In this article, converter channels, a flexible approach for MoC connection within a SystemC environment consisting of three extensions, namely, SystemC-AMS, HetSC, and OSSS+R, are presented.This work is supported by the FP6-2005-IST-5 European project

RITSim: distributed systemC simulation

Parallel or distributed simulation is becoming more than a novel way to speedup design evaluation; it is becoming necessary for simulating modern processors in a reasonable timeframe. As architectural features become faster, smaller, and more complex, designers are interested in obtaining detailed and accurate performance and power estimations. Uniprocessor simulators may not be able to meet such demands. The RITSim project uses SystemC to model a processor microarchitecture and memory subsystem in great detail. SystemC is a C++ library built on a discrete-event simulation kernel. Many projects have successfully implemented parallel discrete-event simulation (PDES) frameworks to distribute simulation among several hosts. The field promises significant simulation speedup, possibly leading to faster turnaround time in design space exploration and commercial production. However, parallel implementation of such simulators is not an easy task. It requires modification of the simulation kernel for effective partitioning and synchronization. This thesis explores PDES techniques and presents a distributed version of the SystemC simulation environment. With minimal user interaction, SystemC models can executed on a cluster of workstations using a message-passing library such as the Message Passing Interface (MPI). The implementation is designed for transparency; distribution and synchronization happen with little intervention by the model author. Modification of SystemC is fashioned to promote maintainability with future releases. Furthermore, only freely available libraries are used for maximum flexibility and portability

Hybrid Multiresolution Simulation & Model Checking: Network-On-Chip Systems

abstract: Designers employ a variety of modeling theories and methodologies to create functional models of discrete network systems. These dynamical models are evaluated using verification and validation techniques throughout incremental design stages. Models created for these systems should directly represent their growing complexity with respect to composition and heterogeneity. Similar to software engineering practices, incremental model design is required for complex system design. As a result, models at early increments are significantly simpler relative to real systems. While experimenting (verification or validation) on models at early increments are computationally less demanding, the results of these experiments are less trustworthy and less rewarding. At any increment of design, a set of tools and technique are required for controlling the complexity of models and experimentation. A complex system such as Network-on-Chip (NoC) may benefit from incremental design stages. Current design methods for NoC rely on multiple models developed using various modeling frameworks. It is useful to develop frameworks that can formalize the relationships among these models. Fine-grain models are derived using their coarse-grain counterparts. Moreover, validation and verification capability at various design stages enabled through disciplined model conversion is very beneficial. In this research, Multiresolution Modeling (MRM) is used for system level design of NoC. MRM aids in creating a family of models at different levels of scale and complexity with well-formed relationships. In addition, a variant of the Discrete Event System Specification (DEVS) formalism is proposed which supports model checking. Hierarchical models of Network-on-Chip components may be created at different resolutions while each model can be validated using discrete-event simulation and verified via state exploration. System property expressions are defined in the DEVS language and developed as Transducers which can be applied seamlessly for model checking and simulation purposes. Multiresolution Modeling with verification and validation capabilities of this framework complement one another. MRM manages the scale and complexity of models which in turn can reduces V&V time and effort and conversely the V&V helps ensure correctness of models at multiple resolutions. This framework is realized through extending the DEVS-Suite simulator and its applicability demonstrated for exemplar NoC models.Dissertation/ThesisDoctoral Dissertation Computer Science 201