Interconnect optimizations for nanometer VLSI design

textAs the semiconductor technology scales into deeper sub-micron domain, billions of transistors can be used on a single system-on-chip (SOC) makes interconnection optimization more important roughly for two reasons. First, congestion, power, timing in routing and buffering requirements make inter- connection optimization more and more challenging. Second, gate delay get- ting shorter while the RC delay gets longer due to scaling. Study of interconnection construction and optimization algorithms in real industry flows and designs ends up with interesting findings. One used to be overlooked but very important and practical problem is how to utilize over- the-block routing resources intelligently. Routing over large IP blocks needs special attention as there is almost no way to insert buffers inside hard IP blocks, which can lead to unsolvable slew/timing violations. In current design flows we have seen, the routing resources over the IP blocks were either dealt as routing blockages leading to a significant waste, or simply treated in the same way as outside-the-block routing resources, which would violate the slew constraints and thus fail buffering. To handle that, this work proposes a novel buffering-aware over-the- block rectilinear Steiner minimum tree (BOB-RSMT) algorithm which helps reclaim the “wasted” over-the-block routing resources while meeting user-specified slew constraints. Proposed algorithm incrementally and efficiently migrates initial tree structures with buffering-awareness to meet slew constraints while minimizing wire-length. Moreover, due to the fact that timing optimization is important for the VLSI design, in this work, timing-driven over-the-block rectilinear Steiner tree (TOB-RST) is also studied to optimize critical paths. This proposed TOB-RST algorithm can be used in routing or post-routing stage to provide high-quality topologies to help close timing. Then a follow-up problem emerges: how to accomplish the whole routing with over-the-block routing resources used properly. Utilizing over-the- block routing resources could dramatically improve the routing solution, yet require special attention, since the slew, affected by different RC on different metal layers, must be constrained by buffering and is easily violated. Moreover, even of all nets are slew-legalized, the routing solution could still suffer from heavy congestion problem. A new global router, BOB-Router, is to solve the over-the-block global routing problem through minimizing overflows, wire-length and via count simultaneously without violating slew constraints. Based on my completed works, BOB-RSMT and BOB-Router tremendously improve the overall routing and buffering quality. Experimental results show that proposed over-the-block rectilinear Steiner tree construction and routing completely satisfies the slew constraints and significantly outperforms the obstacle-avoiding rectilinear Steiner tree construction and routing in terms of wire-length, via count and overflows.Electrical and Computer Engineerin

Doctor of Philosophy

dissertationPortable electronic devices will be limited to available energy of existing battery chemistries for the foreseeable future. However, system-on-chips (SoCs) used in these devices are under a demand to offer more functionality and increased battery life. A difficult problem in SoC design is providing energy-efficient communication between its components while maintaining the required performance. This dissertation introduces a novel energy-efficient network-on-chip (NoC) communication architecture. A NoC is used within complex SoCs due it its superior performance, energy usage, modularity, and scalability over traditional bus and point-to-point methods of connecting SoC components. This is the first academic research that combines asynchronous NoC circuits, a focus on energy-efficient design, and a software framework to customize a NoC for a particular SoC. Its key contribution is demonstrating that a simple, asynchronous NoC concept is a good match for low-power devices, and is a fruitful area for additional investigation. The proposed NoC is energy-efficient in several ways: simple switch and arbitration logic, low port radix, latch-based router buffering, a topology with the minimum number of 3-port routers, and the asynchronous advantages of zero dynamic power consumption while idle and the lack of a clock tree. The tool framework developed for this work uses novel methods to optimize the topology and router oorplan based on simulated annealing and force-directed movement. It studies link pipelining techniques that yield improved throughput in an energy-efficient manner. A simulator is automatically generated for each customized NoC, and its traffic generators use a self-similar message distribution, as opposed to Poisson, to better match application behavior. Compared to a conventional synchronous NoC, this design is superior by achieving comparable message latency with half the energy

Using ant colony optimization for routing in microprocesors

Power consumption is an important constraint on VLSI systems. With the advancement in technology, it is now possible to pack a large range of functionalities into VLSI devices. Hence it is important to find out ways to utilize these functionalities with optimized power consumption. This work focuses on curbing power consumption at the design stage. This work emphasizes minimizing active power consumption by minimizing the load capacitance of the chip. Capacitance of wires and vias can be minimized using Ant Colony Optimization (ACO) algorithms. ACO provides a multi agent framework for combinatorial optimization problems and hence is used to handle multiple constraints of minimizing wire-length and vias to achieve the goal of minimizing capacitance and hence power consumption. The ACO developed here is able to achieve an 8% reduction of wire-length and 7% reduction in vias thereby providing a 7% reduction in total capacitance, compared to other state of the art routers

Simulation Of Multi-core Systems And Interconnections And Evaluation Of Fat-Mesh Networks

Simulators are very important in computer architecture research as they enable the exploration of new architectures to obtain detailed performance evaluation without building costly physical hardware. Simulation is even more critical to study future many-core architectures as it provides the opportunity to assess currently non-existing computer systems. In this thesis, a multiprocessor simulator is presented based on a cycle accurate architecture simulator called SESC. The shared L2 cache system is extended into a distributed shared cache (DSC) with a directory-based cache coherency protocol. A mesh network module is extended and integrated into SESC to replace the bus for scalable inter-processor communication. While these efforts complete an extended multiprocessor simulation infrastructure, two interconnection enhancements are proposed and evaluated. A novel non-uniform fat-mesh network structure similar to the idea of fat-tree is proposed. This non-uniform mesh network takes advantage of the average traffic pattern, typically all-to-all in DSC, to dedicate additional links for connections with heavy traffic (e.g., near the center) and fewer links for lighter traffic (e.g., near the periphery). Two fat-mesh schemes are implemented based on different routing algorithms. Analytical fat-mesh models are constructed by presenting the expressions for the traffic requirements of personalized all-to-all traffic. Performance improvements over the uniform mesh are demonstrated in the results from the simulator. A hybrid network consisting of one packet switching plane and multiple circuit switching planes is constructed as the second enhancement. The circuit switching planes provide fast paths between neighbors with heavy communication traffic. A compiler technique that abstracts the symbolic expressions of benchmarks' communication patterns can be used to help facilitate the circuit establishment