820 research outputs found
Autonomous Locomotion Mode Transition Simulation of a Track-legged Quadruped Robot Step Negotiation
Multi-modal locomotion (e.g. terrestrial, aerial, and aquatic) is gaining
increasing interest in robotics research as it improves the robots
environmental adaptability, locomotion versatility, and operational
flexibility. Within the terrestrial multiple locomotion robots, the advantage
of hybrid robots stems from their multiple (two or more) locomotion modes,
among which robots can select from depending on the encountering terrain
conditions. However, there are many challenges in improving the autonomy of the
locomotion mode transition between their multiple locomotion modes. This work
proposed a method to realize an autonomous locomotion mode transition of a
track-legged quadruped robot steps negotiation. The autonomy of the
decision-making process was realized by the proposed criterion to comparing
energy performances of the rolling and walking locomotion modes. Two climbing
gaits were proposed to achieve smooth steps negotiation behaviours for energy
evaluation purposes. Simulations showed autonomous locomotion mode transitions
were realized for negotiations of steps with different height. The proposed
method is generic enough to be utilized to other hybrid robots after some
pre-studies of their locomotion energy performances
Keep Rollin' - Whole-Body Motion Control and Planning for Wheeled Quadrupedal Robots
We show dynamic locomotion strategies for wheeled quadrupedal robots, which
combine the advantages of both walking and driving. The developed optimization
framework tightly integrates the additional degrees of freedom introduced by
the wheels. Our approach relies on a zero-moment point based motion
optimization which continuously updates reference trajectories. The reference
motions are tracked by a hierarchical whole-body controller which computes
optimal generalized accelerations and contact forces by solving a sequence of
prioritized tasks including the nonholonomic rolling constraints. Our approach
has been tested on ANYmal, a quadrupedal robot that is fully torque-controlled
including the non-steerable wheels attached to its legs. We conducted
experiments on flat and inclined terrains as well as over steps, whereby we
show that integrating the wheels into the motion control and planning framework
results in intuitive motion trajectories, which enable more robust and dynamic
locomotion compared to other wheeled-legged robots. Moreover, with a speed of 4
m/s and a reduction of the cost of transport by 83 % we prove the superiority
of wheeled-legged robots compared to their legged counterparts.Comment: IEEE Robotics and Automation Letter
Real-Time Planning with Primitives for Dynamic Walking over Uneven Terrain
We present an algorithm for receding-horizon motion planning using a finite
family of motion primitives for underactuated dynamic walking over uneven
terrain. The motion primitives are defined as virtual holonomic constraints,
and the special structure of underactuated mechanical systems operating subject
to virtual constraints is used to construct closed-form solutions and a special
binary search tree that dramatically speed up motion planning. We propose a
greedy depth-first search and discuss improvement using energy-based
heuristics. The resulting algorithm can plan several footsteps ahead in a
fraction of a second for both the compass-gait walker and a planar
7-Degree-of-freedom/five-link walker.Comment: Conference submissio
Review article: locomotion systems for ground mobile robots in unstructured environments
Abstract. The world market of mobile robotics is expected to increase substantially in the next 20 yr, surpassing the market of industrial robotics in terms of units and sales. Important fields of application are homeland security, surveillance, demining, reconnaissance in dangerous situations, and agriculture. The design of the locomotion systems of mobile robots for unstructured environments is generally complex, particularly when they are required to move on uneven or soft terrains, or to climb obstacles. This paper sets out to analyse the state-of-the-art of locomotion mechanisms for ground mobile robots, focussing on solutions for unstructured environments, in order to help designers to select the optimal solution for specific operating requirements. The three main categories of locomotion systems (wheeled - W, tracked - T and legged - L) and the four hybrid categories that can be derived by combining these main locomotion systems are discussed with reference to maximum speed, obstacle-crossing capability, step/stair climbing capability, slope climbing capability, walking capability on soft terrains, walking capability on uneven terrains, energy efficiency, mechanical complexity, control complexity and technology readiness. The current and future trends of mobile robotics are also outlined
Locomotion system for ground mobile robots in uneven and unstructured environments
One of the technology domains with the greatest growth rates nowadays is service robots. The extensive use of ground mobile robots in environments that are unstructured or structured for humans is a promising challenge for the coming years, even though Automated Guided Vehicles (AGV) moving on flat and compact grounds are already commercially available and widely utilized to move components and products inside indoor industrial buildings. Agriculture, planetary exploration, military operations, demining, intervention in case of terrorist attacks, surveillance, and reconnaissance in hazardous conditions are important application domains.
Due to the fact that it integrates the disciplines of locomotion, vision, cognition, and navigation, the design of a ground mobile robot is extremely interdisciplinary. In terms of mechanics, ground mobile robots, with the exception of those designed for particular surroundings and surfaces (such as slithering or sticky robots), can move on wheels (W), legs (L), tracks (T), or hybrids of these concepts (LW, LT, WT, LWT). In terms of maximum speed, obstacle crossing ability, step/stair climbing ability, slope climbing ability, walking capability on soft terrain, walking capability on uneven terrain, energy efficiency, mechanical complexity, control complexity, and technology readiness, a systematic comparison of these locomotion systems is provided in [1].
Based on the above-mentioned classification, in this thesis, we first introduce a small-scale hybrid locomotion robot for surveillance and inspection, WheTLHLoc, with two tracks, two revolving legs, two active wheels, and two passive omni wheels. The robot can move in several different ways, including using wheels on the flat, compact ground,[1] tracks on soft, yielding terrain, and a combination of tracks, legs, and wheels to navigate obstacles. In particular, static stability and non-slipping characteristics are considered while analyzing the process of climbing steps and stairs. The experimental test on the first prototype has proven the planned climbing maneuver’s efficacy and the WheTLHLoc robot's operational flexibility. Later we present another development of WheTLHLoc and introduce WheTLHLoc 2.0 with newly designed legs, enabling the robot to deal with bigger obstacles.
Subsequently, a single-track bio-inspired ground mobile robot's conceptual and embodiment designs are presented. This robot is called SnakeTrack. It is designed for surveillance and inspection activities in unstructured environments with constrained areas. The vertebral column has two end modules and a variable number of vertebrae linked by compliant joints, and the surrounding track is its essential component. Four motors drive the robot: two control the track motion and two regulate the lateral flexion of the vertebral column for steering. The compliant joints enable limited passive torsion and retroflection of the vertebral column, which the robot can use to adapt to uneven terrain and increase traction. Eventually, the new version of SnakeTrack, called 'Porcospino', is introduced with the aim of allowing the robot to move in a wider variety of terrains.
The novelty of this thesis lies in the development and presentation of three novel designs of small-scale mobile robots for surveillance and inspection in unstructured environments, and they employ hybrid locomotion systems that allow them to traverse a variety of terrains, including soft, yielding terrain and high obstacles.
This thesis contributes to the field of mobile robotics by introducing new design concepts for hybrid locomotion systems that enable robots to navigate challenging environments. The robots presented in this thesis employ modular designs that allow their lengths to be adapted to suit specific tasks, and they are capable of restoring their correct position after falling over, making them highly adaptable and versatile.
Furthermore, this thesis presents a detailed analysis of the robots' capabilities, including their step-climbing and motion planning abilities. In this thesis we also discuss possible refinements for the robots' designs to improve their performance and reliability.
Overall, this thesis's contributions lie in the design and development of innovative mobile robots that address the challenges of surveillance and inspection in unstructured environments, and the analysis and evaluation of these robots' capabilities. The research presented in this thesis provides a foundation for further work in this field, and it may be of interest to researchers and practitioners in the areas of robotics, automation, and inspection.
As a general note, the first robot, WheTLHLoc, is a hybrid locomotion robot capable of combining tracked locomotion on soft terrains, wheeled locomotion on flat and compact grounds, and high obstacle crossing capability. The second robot, SnakeTrack, is a small-size mono-track robot with a modular structure composed of a vertebral column and a single peripherical track revolving around it. The third robot, Porcospino, is an evolution of SnakeTrack and includes flexible spines on the track modules for improved traction on uneven but firm terrains, and refinements of the shape of the track guidance system. This thesis provides detailed descriptions of the design and prototyping of these robots and presents analytical and experimental results to verify their capabilities
Development of a Quadruped Robot and Parameterized Stair-Climbing Behavior
Stair-climbing is a difficult task for mobile robots to accomplish, particularly for legged robots. While quadruped robots have previously demonstrated the ability to climb stairs, none have so far been capable of climbing stairs of variable height while carrying all required sensors, controllers, and power sources on-board. The goal of this thesis was the development of a self-contained quadruped robot capable of detecting, classifying, and climbing stairs of any height within a specified range. The design process for this robot is described, including the development of the joint, leg, and body configuration, the design and selection of components, and both dynamic and finite element analyses performed to verify the design. A parameterized stair-climbing gait is then developed, which is adaptable to any stair height of known width and height. This behavior is then implemented on the previously discussed quadruped robot, which then demonstrates the capability to climb three different stair variations with no configuration change
- …