Spacecraft applications of advanced global positioning system technology

The purpose of this study was to evaluate potential uses of Global Positioning System (GPS) in spacecraft applications in the following areas: attitude control and tracking; structural control; traffic control; and time base definition (synchronization). Each of these functions are addressed. Also addressed are the hardware related issues concerning the application of GPS technology and comparisons are provided with alternative instrumentation methods for specific functions required for an advanced low earth orbit spacecraft

Robust Positioning in the Presence of Multipath and NLOS GNSS Signals

GNSS signals can be blocked and reflected by nearby objects, such as buildings, walls, and vehicles. They can also be reflected by the ground and by water. These effects are the dominant source of GNSS positioning errors in dense urban environments, though they can have an impact almost anywhere. Non- line-of-sight (NLOS) reception occurs when the direct path from the transmitter to the receiver is blocked and signals are received only via a reflected path. Multipath interference occurs, as the name suggests, when a signal is received via multiple paths. This can be via the direct path and one or more reflected paths, or it can be via multiple reflected paths. As their error characteristics are different, NLOS and multipath interference typically require different mitigation techniques, though some techniques are applicable to both. Antenna design and advanced receiver signal processing techniques can substantially reduce multipath errors. Unless an antenna array is used, NLOS reception has to be detected using the receiver's ranging and carrier-power-to-noise-density ratio (C/N0) measurements and mitigated within the positioning algorithm. Some NLOS mitigation techniques can also be used to combat severe multipath interference. Multipath interference, but not NLOS reception, can also be mitigated by comparing or combining code and carrier measurements, comparing ranging and C/N0 measurements from signals on different frequencies, and analyzing the time evolution of the ranging and C/N0 measurements

Incorporation of GNSS multipath to improve autonomous rendezvous, docking and proximity operations in space

Automated rendezvous and docking (AR&D;) operations are important for many future space missions, such as the resupply of space stations, repair and refueling of large satellites, and active removal of orbital debris. These operations depend critically on accurate, real-time knowledge of the relative position and velocity between two space vehicles. Unfortunately, Global Navigation Satellite System (GNSS) capabilities remain severely limited in close proximity to large space structures due to significant multipath effects and signal blockage. Although GNSS is used for the initial stages of approach, other instruments such as laser, radar and vision-based systems, are required to augment GNSS during AR&D; over the last few hundred meters. This dissertation evaluates the feasibility of GNSS multipath-based relative space navigation. Methods for separating and interpreting reflected signals are demonstrated using GNSS data collected during Hubble Servicing Mission 4 (HSM4), a model of the mission geometry, electromagnetic (EM) ray tracing, and a custom GNSS software receiver. EM ray tracing is used to show that a number of signals sufficient for ranging are reflected by the Hubble Space Telescope (HST) during HSM4, and the properties of these reflections are used to generate simulated GNSS data. The impact of reflected signals on code correlation shape, code tracking error, and pseudorange measurement is demonstrated using the simulated and experimental data. Relative navigation is demonstrated using simulated reflected signal measurements and the dependence of relative navigation on the reflecting object’s scattering properties is illustrated. From the tracking of data from two oppositely polarized antennas, both simulated and experimental, it is determined that multipath measurements are limited by system properties such as antenna polarization quality and front end bandwidth. Design considerations involved in optimizing a receiver to measure reflected signals are discussed

Navigation algorithm for INS/GPS Data Fusion

Diplomová práce se zabývá návrhem algoritmu rozšířeného Kalmanova filtru, který integruje data z inerciálního navigačního systému (INS) a globálního polohovacího systému (GPS). Součástí algoritmu je i samotná mechanizace INS, určující na základě dat z akcelerometrů a gyroskopů údaje o rychlosti, zeměpisné pozici a polohových úhlech letadla. Vzhledem k rychlému nárůstu chybovosti INS je výstup korigován hodnotami rychlosti a pozice získané z GPS. Výsledný algoritmus je implementován v prostředí Simulink. Součástí práce je odvození jednotlivých stavových matic rozšířeného Kalmanova filtru.This diploma thesis deals with Extended Kalman Filter algorithm fusing data from inertial navigation system (INS) and Global Positioning System (GPS). The part of the developed algorithm is a mechanization of INS which processes data from accelerometers and gyroscopes to provide velocity, position and attitude angles. Due to rapid increase of INS output errors, the EKF is used to correct INS outputs by velocity and position from GPS. The final algorithm is developed in Simulink environment. This thesis includes derivation of EKF state matrices.

A Survey of Positioning Systems Using Visible LED Lights

© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.As Global Positioning System (GPS) cannot provide satisfying performance in indoor environments, indoor positioning technology, which utilizes indoor wireless signals instead of GPS signals, has grown rapidly in recent years. Meanwhile, visible light communication (VLC) using light devices such as light emitting diodes (LEDs) has been deemed to be a promising candidate in the heterogeneous wireless networks that may collaborate with radio frequencies (RF) wireless networks. In particular, light-fidelity has a great potential for deployment in future indoor environments because of its high throughput and security advantages. This paper provides a comprehensive study of a novel positioning technology based on visible white LED lights, which has attracted much attention from both academia and industry. The essential characteristics and principles of this system are deeply discussed, and relevant positioning algorithms and designs are classified and elaborated. This paper undertakes a thorough investigation into current LED-based indoor positioning systems and compares their performance through many aspects, such as test environment, accuracy, and cost. It presents indoor hybrid positioning systems among VLC and other systems (e.g., inertial sensors and RF systems). We also review and classify outdoor VLC positioning applications for the first time. Finally, this paper surveys major advances as well as open issues, challenges, and future research directions in VLC positioning systems.Peer reviewe

Resilient Peer-to-Peer Ranging using Narrowband High-Performance Software-Defined Radios for Mission-Critical Applications

There has been a growing need for resilient positioning for numerous applications of the military and emergency services that routinely conduct operations that require an uninterrupted positioning service. However, the level of resilience required for these applications is difficult to achieve using the popular navigation and positioning systems available at the time of this writing. Most of these systems are dependent on existing infrastructure to function or have certain vulnerabilities that can be too easily exploited by hostile forces. Mobile ad-hoc networks can bypass some of these prevalent issues making them an auspicious topic for positioning and navigation research and development. Such networks consist of portable devices that collaborate to form wireless communication links with one another and collectively carry out vital network functions independent of any fixed centralized infrastructure. The purpose of the research presented in this thesis is to adapt the protocols of an existing narrowband mobile ad-hoc communications system provided by Terrafix to enable range measuring for positioning. This is done by extracting transmission and reception timestamps of signals exchanged between neighbouring radios in the network with the highest precision possible. However, many aspects of the radios forming this network are generally not conducive to precise ranging, so the ranging protocols implemented need to either maneuver around these shortcomings or compensate for loss of precision caused. In particular, the narrow bandwidth of the signals that drastically reduces the resolution of symbol timing. The objective is to determine what level of accuracy and precision is possible using this radio network and whether one can justify investment for further development. Early experiments have provided a simple ranging demonstration in a benign environment, using the existing synchronization protocols, by extracting time data. The experiments have then advanced to the radio’s signal processing to adjust the synchronization protocols for maximize symbol timing precision and correct for clock drift. By implementing innovative synchronization techniques to the radio network, ranging data collected under benign conditions can exhibit a standard deviation of less than 3m. The lowest standard deviation achieved using only the existing methods of synchronization was over two orders of magnitude greater. All this is achieved in spite of the very narrow 10−20kHz bandwidth of the radio signals, which makes producing range estimates with an error less than 10−100m much more challenging compared to wider bandwidth systems. However, this figure is beholden to the relative motion of neighbouring radios in the network and how frequently range estimates need to be made. This thesis demonstrates how such a precision may be obtained and how this figure is likely to hold up when applied in conditions that are not ideal

Opportunistic Angle of Arrival Estimation in Impaired Scenarios

This work if focused on the analysis and the development of Angle of Arrival (AoA) radio localization methods. The radio positioning system considered is constituted by a radio source and by a receiving array of antennas. The positioning algorithms treated in this work are designed to have a passive and opportunistic approach. The opportunistic attribute implies that the radio localization algorithms are designed to provide the AoA estimation with nearly-zero information on the transmitted signals. No training sequences or waveforms custom designed for localization are taken into account. The localization is termed passive since there is no collaboration between the transmitter and the receiver during the localization process. Then, the algorithms treated in this work are designed to eavesdrop already existing communication signals and to locate their radio source with nearly-zero knowledge of the signal and without the collaboration of the transmitting node. First of all, AoA radio localization algorithms can be classified in terms of involved signals (narrowband or broadband), antenna array pattern (L-shaped, circular, etc.), signal structure (sinusoidal, training sequences, etc.), Differential Time of Arrival (D-ToA) / Differential Phase of Arrival (D-PoA) and collaborative/non collaborative. Than, the most detrimental effects for radio communications are treated: the multipath (MP) channels and the impaired hardware. A geometric model for the MP is analysed and implemented to test the robustness of the proposed methods. The effects of MP on the received signals statistics from the AoA estimation point-of-view are discussed. The hardware impairments for the most common components are introduced and their effects in the AoA estimation process are analysed. Two novel algorithms that exploits the AoA from signal snapshots acquired sequentially with a time division approach are presented. The acquired signals are QAM waveforms eavesdropped from a pre-existing communication. The proposed methods, namely Constellation Statistical Pattern IDentification and Overlap (CSP-IDO) and Bidimensional CSP-IDO (BCID), exploit the probability density function (pdf) of the received signals to obtain the D-PoA. Both CSP-IDO and BCID use the statistical pattern of received signals exploiting the transmitter statistical signature. Since the presence of hardware impairments modify the statistical pattern of the received signals, CSP-IDO and BCID are able to exploit it to improve the performance with respect to (w.r.t.) the ideal case. Since the proposed methods can be used with a switched antenna architecture they are implementable with a reduced hardware contrariwise to synchronous methods like MUltiple SIgnal Classification (MUSIC) that are not applicable. Then, two iterative AoA estimation algorithms for the dynamic tracking of moving radio sources are implemented. Statistical methods, namely PF, are used to implement the iterative tracking of the AoA from D-PoA measures in two different scenarios: automotive and Unmanned Aerial Vehicle (UAV). The AoA tracking of an electric car signalling with a IEEE 802.11p-like standard is implemented using a test-bed and real measures elaborated with a the proposed Particle Swarm Adaptive Scattering (PSAS) algorithm. The tracking of a UAV moving in the 3D space is investigated emulating the UAV trajectory using the proposed Confined Area Random Aerial Trajectory Emulator (CARATE) algorithm

On-ice measures of external load in relation to match outcome in elite female ice hockey

The aim of this study is to investigate the differences between select on-ice measures using inertial movement sensors based on match outcome, and to determine changes in player movements across three periods of play. Data were collected during one season of competition in elite female ice hockey players (N = 20). Two-factor mixed effects ANOVAs for each skating position were performed to investigate the differences in match outcome, as well as differences in external load measures during the course of a match. For match outcome, there was a small difference for forwards in explosive ratio (p = 0.02, ES = 0.26) and percentage high force strides (p = 0.04, ES = 0.50). When viewed across three periods of a match, moderate differences were found in skating load (p = 0.01, ES = 0.75), explosive efforts (p = 0.04, ES = 0.63), and explosive ratio (p = 0.002, ES = 0.87) for forwards, and in PlayerLoad (p = 0.01, ES = 0.70), explosive efforts (p = 0.04, ES = 0.63), and explosive ratio (p = 0.01, ES = 0.70) for defense. When examining the relevance to match outcome, external load measures associated with intensity appear to be an important factor among forwards. These results may be helpful for coaches and sport scientists when making decisions pertaining to training and competition strategies.York University Librarie

Carrier-phase multipath in satellite-based positioning

[no abstract

Development And Test of A Digitally Steered Antenna Array for The Navigator GPS Receiver

Global Positioning System (GPS)-based navigation has become common for low-Earth orbit spacecraft as the signal environment is similar to that on the Earth s surface. The situation changes abruptly, however, for spacecraft whose orbital altitudes exceed that of the GPS constellation. Visibility is dramatically reduced and signals that are present may be very weak and more susceptible to interference. GPS receivers effective at these altitudes require increased sensitivity, which often requires a high-gain antenna. Pointing such an antenna can pose a challenge. One efficient approach to mitigate these problems is the use of a digitally steered antenna array. Such an antenna can optimally allocate gain toward desired signal sources and away from interferers. This paper presents preliminary results in the development and test of a digitally steered antenna array for the Navigator GPS research program at NASA s Goddard Space Flight Center. In particular, this paper highlights the development of an array and front-end electronics, the development and test of a real-time software GPS receiver, and implementation of three beamforming methods for combining the signals from the array. Additionally, this paper discusses the development of a GPS signal simulator which produces digital samples of the GPS L1C/A signals as they would be received by an arbitrary antenna array configuration. The simulator models transmitter and receiver dynamics, near-far and multipath interference, and has been a critical component in both the development and test of the GPS receiver. The GPS receiver system was tested with real and simulated GPS signals. Preliminary results show that performance improvement was achieved in both the weak signal and interference environments, matching analytical predictions. This paper summarizes our initial findings and discusses the advantages and limitations of the antenna array and the various beamforming methods