2,330 research outputs found
Spacelab system analysis: A study of the Marshall Avionics System Testbed (MAST)
An analysis of the Marshall Avionics Systems Testbed (MAST) communications requirements is presented. The average offered load for typical nodes is estimated. Suitable local area networks are determined
Spacelab system analysis: A study of communications systems for advanced launch systems
An analysis of the required performance of internal avionics data bases for future launch vehicles is presented. Suitable local area networks that can service these requirements are determined
Throughput analysis of the IEEE 802.4 token bus standard under heavy load
It has become clear in the last few years that there is a trend towards integrated digital services. Parallel to the development of public Integrated Services Digital Network (ISDN) is service integration in the local area (e.g., a campus, a building, an aircraft). The types of services to be integrated depend very much on the specific local environment. However, applications tend to generate data traffic belonging to one of two classes. According to IEEE 802.4 terminology, the first major class of traffic is termed synchronous, such as packetized voice and data generated from other applications with real-time constraints, and the second class is called asynchronous which includes most computer data traffic such as file transfer or facsimile. The IEEE 802.4 token bus protocol which was designed to support both synchronous and asynchronous traffic is examined. The protocol is basically a timer-controlled token bus access scheme. By a suitable choice of the design parameters, it can be shown that access delay is bounded for synchronous traffic. As well, the bandwidth allocated to asynchronous traffic can be controlled. A throughput analysis of the protocol under heavy load with constant channel occupation of synchronous traffic and constant token-passing times is presented
Simulation analysis of FDDI network using NETWORK II.5 software package
In recent years, one of the most exciting advances in media has been the use of fiber optics in LANs. The bandwidth provided by Fiber Optic Technology has drastically increased the number of new applications that can be supported by communication networks. In order to support a variety of services, in 1986, the American National Standard Institute (ANSI) Accredited Standards Committee (ASC) X3, and the ASC X3T9.5 Task Group developed a new standard; the Fiber Distributed Data Interface (FDDI) [1]. This is a high speed (100 Mbps) optical communication network based on a token passing mode of operation. The Medium Access Control (MAC) Protocol selected for this network attempts to provide priority services, as well as bounded delay transmission for real time applications [2].
This thesis presents results for the Voice-Data performance of the Medium Access Control (MAC) protocol, selected for the FDDI network, using the NETWORK 11.5 [6] software package. This protocol can provide priority services to different types of traffic, as well as guarantee bounded delays for real-time applications. The effect of various system parameters on performance is investigated
Performance evaluation and comparison of ordinary, adaptive and exhaustive service in the token ring network
In the token ring network different types of services gives different delay characteristics. Results to date have shown that in asymmetric traffic, exhaustive service gives more delay to lightly loaded stations where ordinary service wastes time in circulating the token after each transmission. In general, there is a need for more efficient service, which is compromised between ordinary and exhaustive service.
Ordinary and exhaustive service are analyzed in this thesis, and a new service, adaptive service, is proposed. By using timer and counter, adaptive service dynamically changes token holding time at the station. Different types of delay characteristics are derived from their respective simulation models. The results indicate that proposed adaptive service has superior delay characteristics when compared with ordinary and adaptive service in asymmetric and symmetric traffic
Guaranteeing synchronous message deadlines with the timed token medium access control protocol
We study the problem of guaranteeing synchronous message deadlines in token ring networks where the timed token medium access control protocol is employed. Synchronous capacity, defined as the maximum time for which a node can transmit its synchronous messages every time it receives the token, is a key parameter in the control of synchronous message transmission. To ensure the transmission of synchronous messages before their deadlines, synchronous capacities must be properly allocated to individual nodes. We address the issue of appropriate allocation of the synchronous capacities. Several synchronous capacity allocation schemes are analyzed in terms of their ability to satisfy deadline constraints of synchronous messages. We show that an inappropriate allocation of the synchronous capacities could cause message deadlines to be missed even if the synchronous traffic is extremely low. We propose a scheme called the normalized proportional allocation scheme which can guarantee the synchronous message deadlines for synchronous traffic of up to 33 percent of available utilization. To date, no other synchronous capacity allocation scheme has been reported to achieve such substantial performance. Another major contribution of this paper is an extension to the previous work on the bounded token rotation time. We prove that the time elapsed between any consecutive visits to a particular node is bounded by upsilon TTRT, where TTRT is the target token rotation time set up at system initialization time. The previous result by Johnson and Sevcik is a special case where upsilon = 2. We use this result in the analysis of various synchronous allocation schemes. It can also be applied in other similar studies
Performance Improvements for FDDI and CSMA/CD Protocols
The High-Performance Computing Initiative from the White House Office of Science and Technology Policy has defined 20 major challenges in science and engineering which are dependent on the solutions to a number of high-performance computing problems. One of the major areas of focus of this initiative is the development of gigabit rate networks to be used in environments such as the space station or a National Research and Educational Network (NREN).
The strategy here is to use existing network designs as building blocks for achieving higher rates, with the ultimate goal being a gigabit rate network. Two strategies which contribute to achieving this goal are examined in detail.1
FDDI2 is a token ring network based on fiber optics capable of a 100 Mbps rate. Both media access (MAC) and physical layer modifications are considered. A method is presented which allows one to determine maximum utilization based on the token-holding timer settings. Simulation results show that employing the second counter-rotating ring in combination with destination removal has a multiplicative effect greater than the effect which either of the factors have individually on performance. Two 100 Mbps rings can handle loads in the range of 400 to 500 Mbps for traffic with a uniform distribution and fixed packet size. Performance is dependent on the number of nodes, improving as the number increases. A wide range of environments are examined to illustrate robustness, and a method of implementation is discussed
A Slotted Ring Test Bed for the Study of ATM Network Congestion Management
This thesis addresses issues raised by the proposed Broadband Integrated Services Digital Network which will provide a flexible combination of integrated services traffic through its cell-based Asynchronbus Transport Mode (ATM). The introduction of a cell-based, connection-oriented, transport mode brings with it new technical challenges for network management. The routing of cells, their service at switching centres, and problems of cell congestion not encountered in the existing network, are some of the key issues.
The thesis describes the development of a hardware slotted ring testbed for the investigation of congestion management in an ATM network. The testbed is designed to incorporate a modified form of the ORWELL protocol to control media access. The media access protocol is analysed to give a model for maximum throughput and reset interval under various traffic distributions. The results from the models are compared with measurements carried out on the testbed, where cell arrival statistics are also varied. It is shown that the maximum throughput of the testbed is dependent on both traffic distribution and cell arrival statistics.
The testbed is used for investigations in a heterogeneous traffic environment where two classes of traffic with different cell arrival statistics and quality of service requirements are defined. The effect of prioritisation, media access protocol, traffic intensity, and traffic source statistics were investigated by determining an Admissible Load Region (ALR) for a network station. Conclusions drawn from this work suggest that there are many problems associated with the reliable definition of an ALR because of the number of variable parameters which could shift the ALR boundary. A suggested direction for further work is to explore bandwidth reservation and the concept of equivalent capacity of a connection, and how this can be linked to source control parameters
- …