Electrostatic microgenerators

Accepted versio

Power Processing for Electrostatic Microgenerators

Microgenerators are electro-mechanical devices which harvest energy from local environmental from such sources as light, heat and vibrations. These devices are used to extend the life-time of wireless sensor network nodes. Vibration-based microgenerators for biomedical applications are investigated in this thesis. In order to optimise the microgenerator system design, a combined electro-mechanical system simulation model of the complete system is required. In this work, a simulation toolkit (known as ICES) has been developed utilising SPICE. The objective is to accurately model end-to-end microgenerator systems. Case-study simulations of electromagnetic and electrostatic microgenerator systems are presented to verify the operation of the toolkit models. Custom semiconductor devices, previously designed for microgenerator use, have also been modelled so that system design and optimisation of complete microgenerator can be accomplished. An analytical framework has been developed to estimate the maximum system effectiveness of an electrostatic microgenerator operating in constant-charge and constant-voltage modes. The calculated system effectiveness values are plotted with respect to microgenerator sizes for different input excitations. Trends in effectiveness are identified and discussed in detail. It was found that when the electrostatic transducer is interfaced with power processing circuit, the parasitic elements of the circuit are reducing the energy generation ability of the transducer by sharing the charge during separation of the capacitor plates. Also, found that in constant-voltage mode the electrostatic microgenerator has a better effectiveness over a large operating range than constant-charge devices. The ICES toolkit was used to perform time-domain simulation of a range of operating points and the simulation results provide verification of the analytical results

Acoustic power delivery to pipeline monitoring wireless sensors

The use of energy harvesting for powering wireless sensors is made more challenging in most applications by the requirement for customi zation to each specific application environment because of specificities of the availab le energy form, such as precise location, direction and motion frequency, as well a s the temporal variation and unpredictability of the energy source. Wireless pow er transfer from dedicated sources can overcome these difficulties, and in this work, the use of targeted ultrasonic power transfer as a possible method for remote powering o f sensor nodes is investigated. A powering system for pipeline monitoring sensors is described and studied experimentally, with a pair of identical, non6inert ial piezoelectric transducers used at the transmitter and receiver. Power transmission of 18 mW (Root6Mean6Square) through 1 m of a 118 mm diameter cast iron pipe, wi th 8 mm wall thickness is demonstrated. By analysis of the delay between tran smission and reception, including reflections from the pipeline edges, a transmission speed of 1000 m/s is observed, corresponding to the phase velocity of the L(0,1) a xial and F(1,1) radial modes of the pipe structure. A reduction of power delivery with water6filling is observed, yet over 4 mW of delivered power through a fully6filled pipe i s demonstrated. The transmitted power and voltage levels exceed the requirements fo r efficient power management, including rectification at cold6starting conditions , and for the operation of low6power sensor nodes. The proposed powering technique may a llow the implementation of energy autonomous wireless sensor systems for monit oring industrial and network pipeline infrastructure

Energy Harvesting from Vibration with Alternate Scavenging Circuitry and Tapered Cantilever Beam

Piezoelectric transducers are increasingly being used to harvest energy from environmental vibrations in order to either power remote sensors or charge batteries that power the sensors. In this paper, a new voltage compensation scheme for high-voltage-based (\u3e 100 V ) energy harvesting is introduced, and its fundamental concepts, as well as the operation details, are elaborated. This scheme, when applied to the voltage inversion method [synchronized switch harvesting on inductor (SSHI)], provides an increase of over 14% in harvested power when compared to the parallel inversion method (parallel SSHI) alone and more than 50% in the case of series inversion method (series SSHI). Second, tapered cantilever beams were shown to be more effective in generating a uniform strain profile over rectangular and trapezoidal beams if they are precisely shaped, resulting in a significant increase in harvested power over available methods in the literature from laboratory experimental tests. In addition, a simplified method to design such a beam is introduced. Finally, a field test of the proposed tapered beam is conducted by using a dozer for earth-moving applications, and experimental results are discussed

Piezoelectric energy harvesting from low frequency and random excitation using frequency up-conversion

The field of energy harvesting comprises all methods to produce energy locally and from surrounding sources, e.g. solar illumination, thermal gradients, vibration, radio frequency, etc. The focus of this thesis is on inertial power generation from host motion, in particular for low frequency and random excitation sources such as the human body. Under such excitation, the kinetic energy available to be converted into electrical energy is small and conversion efficiency is of utmost importance. Broadband harvesting based on frequency tuning or on non-linear vibrations is a possible strategy to overcome this challenge. The technique of frequency up-conversion, where the low frequency excitation is converted to a higher frequency that is optimal for the operation of the transducer is especially promising. Regardless of the source excitation, energy is converted more efficiently. After a general introduction to the research area, two different prototypes based on this latter principle and using piezoelectric bending beams as transducers are presented, one linear design and one rotational. Especially for human motion, the advantages of rotational designs are discussed. Furthermore, magnetic coupling is used to prevent impact on the brittle piezoceramic material when actuating. A mathematical model, combining the magnetic interaction forces and the constitutive mechanical and electrical equations for the piezoelectric bending beam is introduced and the results are provided. Theoretical findings are supported by experimental measurements and the calculation model is validated. The outcome is the successful demonstration of a rotational energy harvester, tested on a custom made shaking set-up and in the real world when worn on the upper arm during running.Open Acces

The Convergence of Parametric Resonance and Vibration Energy Harvesting

Energy harvesting is an emerging technology that derives electricity from the ambient environment in a decentralised and self-contained fashion. Applications include self-powered medical implants, wearable electronics and wireless sensors for structural health monitoring. Amongst the vast options of ambient sources, vibration energy harvesting (VEH) has attracted by far the most research attention. Two of the key persisting issues of VEH are the limited power density compared to conventional power supplies and confined operational frequency bandwidth in light of the random, broadband and fast-varying nature of real vibration. The convention has relied on directly excited resonance to maximise the mechanical-to-electrical energy conversion efficiency. This thesis takes a fundamentally different approach by employing parametric resonance, which, unlike the former, its resonant amplitude growth does not saturate due to linear damping. Therefore, parametric resonance, when activated, has the potential to accumulate much more energy than direct resonance. The vibrational nonlinearities that are almost always associated with parametric resonance can offer a modest frequency widening. Despite its promising theoretical potentials, there is an intrinsic damping dependent initiation threshold amplitude, which must be attained prior to its onset. The relatively low amplitude of real vibration and the unavoidable presence of electrical damping to extract the energy render the onset of parametric resonance practically elusive. Design approaches have been devised to passively minimise this initiation threshold. Simulation and experimental results of various design iterations have demonstrated favourable results for parametric resonance as well as the various threshold-reduction mechanisms. For instance, one of the macro-scale electromagnetic prototypes (∼1800 cm3) when parametrically driven, has demonstrated around 50% increase in half power band and an order of magnitude higher peak power (171.5 mW at 0.57 ms−2) in contrast to the same prototype directly driven at fundamental resonance (27.75 mW at 0.65 ms−2). A MEMS (micro-electromechanical system) prototype with the additional threshold-reduction design needed 1 ms−2 excitation to activate parametric resonance while a comparable device without the threshold-reduction mechanism required in excess of 30 ms−2. One of the macro-scale piezoelectric prototypes operated into auto-parametric resonance has demon-strated notable further reduction to the initiation threshold. A vacuum packaged MEMS prototype demonstrated broadening of the frequency bandwidth along with higher power peak (324 nW and 160 Hz) for the parametric regime compared to when operated in room pressure (166 nW and 80 Hz), unlike the higher but narrower direct resonant peak (60.9 nW and 11 Hz in vacuum and 20.8 nW and 40 Hz in room pressure). The simultaneous incorporation of direct resonance and bi-stability have been investigated to realise multi-regime VEH. The potential to integrate parametric resonance in the electrical domains have also been numerically explored. The ultimate aim is not to replace direct resonance but rather for the various resonant phenomena to complement each other and together harness a larger region of the available power spectrum