Parallel Manipulators

In recent years, parallel kinematics mechanisms have attracted a lot of attention from the academic and industrial communities due to potential applications not only as robot manipulators but also as machine tools. Generally, the criteria used to compare the performance of traditional serial robots and parallel robots are the workspace, the ratio between the payload and the robot mass, accuracy, and dynamic behaviour. In addition to the reduced coupling effect between joints, parallel robots bring the benefits of much higher payload-robot mass ratios, superior accuracy and greater stiffness; qualities which lead to better dynamic performance. The main drawback with parallel robots is the relatively small workspace. A great deal of research on parallel robots has been carried out worldwide, and a large number of parallel mechanism systems have been built for various applications, such as remote handling, machine tools, medical robots, simulators, micro-robots, and humanoid robots. This book opens a window to exceptional research and development work on parallel mechanisms contributed by authors from around the world. Through this window the reader can get a good view of current parallel robot research and applications

Modeling, Control and Estimation of Reconfigurable Cable Driven Parallel Robots

The motivation for this thesis was to develop a cable-driven parallel robot (CDPR) as part of a two-part robotic device for concrete 3D printing. This research addresses specific research questions in this domain, chiefly, to present advantages offered by the addition of kinematic redundancies to CDPRs. Due to the natural actuation redundancy present in a fully constrained CDPR, the addition of internal mobility offers complex challenges in modeling and control that are not often encountered in literature. This work presents a systematic analysis of modeling such kinematic redundancies through the application of reciprocal screw theory (RST) and Lie algebra while further introducing specific challenges and drawbacks presented by cable driven actuators. It further re-contextualizes well-known performance indices such as manipulability, wrench closure quality, and the available wrench set for application with reconfigurable CDPRs. The existence of both internal redundancy and static redundancy in the joint space offers a large subspace of valid solutions that can be condensed through the selection of appropriate objective priorities, constraints or cost functions. Traditional approaches to such redundancy resolution necessitate computationally expensive numerical optimization. The control of both kinematic and actuation redundancies requires cascaded control frameworks that cannot easily be applied towards real-time control. The selected cost functions for numerical optimization of rCDPRs can be globally (and sometimes locally) non-convex. In this work we present two applied examples of redundancy resolution control that are unique to rCDPRs. In the first example, we maximize the directional wrench ability at the end-effector while minimizing the joint torque requirement by utilizing the fitness of the available wrench set as a constraint over wrench feasibility. The second example focuses on directional stiffness maximization at the end-effector through a variable stiffness module (VSM) that partially decouples the tension and stiffness. The VSM introduces an additional degrees of freedom to the system in order to manipulate both reconfigurability and cable stiffness independently. The controllers in the above examples were designed with kinematic models, but most CDPRs are highly dynamic systems which can require challenging feedback control frameworks. An approach to real-time dynamic control was implemented in this thesis by incorporating a learning-based frameworks through deep reinforcement learning. Three approaches to rCDPR training were attempted utilizing model-free TD3 networks. Robustness and safety are critical features for robot development. One of the main causes of robot failure in CDPRs is due to cable breakage. This not only causes dangerous dynamic oscillations in the workspace, but also leads to total robot failure if the controllability (due to lack of cables) is lost. Fortunately, rCDPRs can be utilized towards failure tolerant control for task recovery. The kinematically redundant joints can be utilized to help recover the lost degrees of freedom due to cable failure. This work applies a Multi-Model Adaptive Estimation (MMAE) framework to enable online and automatic objective reprioritization and actuator retasking. The likelihood of cable failure(s) from the estimator informs the mixing of the control inputs from a bank of feedforward controllers. In traditional rigid body robots, safety procedures generally involve a standard emergency stop procedure such as actuator locking. Due to the flexibility of cable links, the dynamic oscillations of the end-effector due to cable failure must be actively dampened. This work incorporates a Linear Quadratic Regulator (LQR) based feedback stabilizer into the failure tolerant control framework that works to stabilize the non-linear system and dampen out these oscillations. This research contributes to a growing, but hitherto niche body of work in reconfigurable cable driven parallel manipulators. Some outcomes of the multiple engineering design, control and estimation challenges addressed in this research warrant further exploration and study that are beyond the scope of this thesis. This thesis concludes with a thorough discussion of the advantages and limitations of the presented work and avenues for further research that may be of interest to continuing scholars in the community

Development of Two Cooperative Stewart Platforms for Machining

Ph.DDOCTOR OF PHILOSOPH

Dynamic state estimation for mobile robots

The scientific goal of this thesis is to tackle different approaches for effective state estimation and modelling of relevant problems in the context of mobile robots. The starting point of this dissertation is the concept of probabilistic robotics, an emerging paradigm that combines state-of-the-art methods with the classic probabilistic theory, developing stochastic frameworks for understanding the uncertain nature of the interaction between a robot and its environment. This allows introducing relevant concepts which are the foundation of the localisation system implemented on the main experimental platform used on this dissertation. An accurate estimation of the position of a robot with respect to a fixed frame is fundamental for building navigation systems that can work in dynamic unstructured environments. This development also allows introducing additional contributions related with global localisation, dynamic obstacle avoidance, path planning and position tracking problems. Kinematics on generalised manipulators are characterised for dealing with complex nonlinear systems. Nonlinear formulations are needed to properly model these systems, which are not always suitable for real-time realisation, lacking analytic formulations in most cases. In this context, this thesis tackles the serial-parallel dual kinematic problem with a novel approach, demonstrating state-of-the-art accuracy and real-time performance. With a spatial decomposition method, the forward kinematics problem on parallel robots and the inverse kinematics problem on serial manipulators is solved modelling the nonlinear behaviour of the pose space using Support Vector Machines. The results are validated on different topologies with the analytic solution for such manipulators, which demonstrates the applicability of the proposed method. Modelling and control of complex dynamical systems is another relevant field with applications on mobile robots. Nonlinear techniques are usually applied to tackle problems like feature or object tracking. However, some nonlinear integer techniques applied for tasks like position tracking in mobile robots with complex dynamics have limited success when modelling such systems. Fractional calculus has demonstrated to be suitable to model complex processes like viscoelasticity or super diffusion. These tools, that take advantage of the generalization of the derivative and integral operators to a fractional order, have been applied to model and control different topics related with robotics in recent years with remarkable success. With the proposal of a fractional-order PI controller, a suitable controller design method is presented to solve the position tracking problem. This is applied to control the distance of a self-driving car with respect to an objective, which can also be applied to other tracking applications like following a navigation path. Furthermore, this thesis introduces a novel fractional-order hyperchaotic system, stabilised with a full-pseudo-state-feedback controller and a located feedback method. This theoretical contribution of a chaotic system is introduced hoping to be useful in this context. Chaos theory has recently started to be applied to study manipulators, biped robots and autonomous navigation, achieving new and promising results, highlighting the uncertain and chaotic nature which also has been found on robots. All together, this thesis is devoted to different problems related with dynamic state estimation for mobile robots, proposing specific contributions related with modelling and control of complex nonlinear systems. These findings are presented in the context of a self-driving electric car, Verdino, jointly developed in collaboration with the Robotics Group of Universidad de La Laguna (GRULL)

Advances in Robot Kinematics : Proceedings of the 15th international conference on Advances in Robot Kinematics

International audienceThe motion of mechanisms, kinematics, is one of the most fundamental aspect of robot design, analysis and control but is also relevant to other scientific domains such as biome- chanics, molecular biology, . . . . The series of books on Advances in Robot Kinematics (ARK) report the latest achievement in this field. ARK has a long history as the first book was published in 1991 and since then new issues have been published every 2 years. Each book is the follow-up of a single-track symposium in which the participants exchange their results and opinions in a meeting that bring together the best of world’s researchers and scientists together with young students. Since 1992 the ARK symposia have come under the patronage of the International Federation for the Promotion of Machine Science-IFToMM.This book is the 13th in the series and is the result of peer-review process intended to select the newest and most original achievements in this field. For the first time the articles of this symposium will be published in a green open-access archive to favor free dissemination of the results. However the book will also be o↵ered as a on-demand printed book.The papers proposed in this book show that robot kinematics is an exciting domain with an immense number of research challenges that go well beyond the field of robotics.The last symposium related with this book was organized by the French National Re- search Institute in Computer Science and Control Theory (INRIA) in Grasse, France

Application of ”ART SIMULATOR” for Manufacturing Similarity Identification in Group Technology Design - Chapter 10

This chapter 10 carried out the exceptional implementation of ART-1 neural network in the analysis of the manufacturing similarity of the cylindrical parts within the group technology design. Established concept of the group technology design begins from the complex part of the group or the group representative. Group representative has all the geometrical elements of the parts in group, and manufacturing procedure may be applied to the machining of any part in the group. The complex part may be realistic or a hypothetical one. The ART-1 artificial neural network provided manufacturing classification according to the geometrical similarities of work-pieces for the group of cylindrical parts. For the manufacturing similarity identification within the group technology design, software package "ART Simulator" is developed and presented in this chapter