1,520 research outputs found
Sonar image interpretation for sub-sea operations
Mine Counter-Measure (MCM) missions are conducted to neutralise underwater
explosives. Automatic Target Recognition (ATR) assists operators by
increasing the speed and accuracy of data review. ATR embedded on vehicles
enables adaptive missions which increase the speed of data acquisition. This
thesis addresses three challenges; the speed of data processing, robustness of
ATR to environmental conditions and the large quantities of data required to
train an algorithm.
The main contribution of this thesis is a novel ATR algorithm. The algorithm
uses features derived from the projection of 3D boxes to produce a set of 2D
templates. The template responses are independent of grazing angle, range
and target orientation. Integer skewed integral images, are derived to accelerate
the calculation of the template responses. The algorithm is compared
to the Haar cascade algorithm. For a single model of sonar and cylindrical
targets the algorithm reduces the Probability of False Alarm (PFA) by 80%
at a Probability of Detection (PD) of 85%. The algorithm is trained on target
data from another model of sonar. The PD is only 6% lower even though no
representative target data was used for training.
The second major contribution is an adaptive ATR algorithm that uses local
sea-floor characteristics to address the problem of ATR robustness with
respect to the local environment. A dual-tree wavelet decomposition of the
sea-floor and an Markov Random Field (MRF) based graph-cut algorithm is
used to segment the terrain. A Neural Network (NN) is then trained to filter
ATR results based on the local sea-floor context. It is shown, for the Haar
Cascade algorithm, that the PFA can be reduced by 70% at a PD of 85%.
Speed of data processing is addressed using novel pre-processing techniques.
The standard three class MRF, for sonar image segmentation, is formulated
using graph-cuts. Consequently, a 1.2 million pixel image is segmented in
1.2 seconds. Additionally, local estimation of class models is introduced to
remove range dependent segmentation quality. Finally, an A* graph search
is developed to remove the surface return, a line of saturated pixels often
detected as false alarms by ATR. The A* search identifies the surface return
in 199 of 220 images tested with a runtime of 2.1 seconds. The algorithm is
robust to the presence of ripples and rocks
Underwater Environment SDAP Method Using Multi Single-Beam Sonars
A new autopilot system for unmanned underwater vehicle (UUV) using multi-single-beam sonars is proposed for environmental exploration. The proposed autopilot system is known as simultaneous detection and patrolling (SDAP), which addresses two fundamental challenges: autonomous guidance and control. Autonomous guidance, autonomous path planning, and target tracking are based on the desired reference path which is reconstructed from the sonar data collected from the environmental contour with the predefined safety distance. The reference path is first estimated by using a support vector clustering inertia method and then refined by Bézier curves in order to satisfy the inertia property of the UUV. Differential geometry feedback linearization method is used to guide the vehicle entering into the predefined path while finite predictive stable inversion control algorithm is employed for autonomous target approaching. The experimental results from sea trials have demonstrated that the proposed system can provide satisfactory performance implying its great potential for future underwater exploration tasks
Video surveillance systems-current status and future trends
Within this survey an attempt is made to document the present status of video surveillance systems. The main components of a surveillance system are presented and studied thoroughly. Algorithms for image enhancement, object detection, object tracking, object recognition and item re-identification are presented. The most common modalities utilized by surveillance systems are discussed, putting emphasis on video, in terms of available resolutions and new imaging approaches, like High Dynamic Range video. The most important features and analytics are presented, along with the most common approaches for image / video quality enhancement. Distributed computational infrastructures are discussed (Cloud, Fog and Edge Computing), describing the advantages and disadvantages of each approach. The most important deep learning algorithms are presented, along with the smart analytics that they utilize. Augmented reality and the role it can play to a surveillance system is reported, just before discussing the challenges and the future trends of surveillance
A review of source term estimation methods for atmospheric dispersion events using static or mobile sensors
Understanding atmospheric transport and dispersal events has an important role in a range of scenarios. Of particular importance is aiding in emergency response after an intentional or accidental chemical, biological or radiological (CBR) release. In the event of a CBR release, it is desirable to know the current and future spatial extent of the contaminant as well as its location in order to aid decision makers in emergency response. Many dispersion phenomena may be opaque or clear, thus monitoring them using visual methods will be difficult or impossible. In these scenarios, relevant concentration sensors are required to detect the substance where they can form a static network on the ground or be placed upon mobile platforms. This paper presents a review of techniques used to gain information about atmospheric dispersion events using static or mobile sensors. The review is concluded with a discussion on the current limitations of the state of the art and recommendations for future research
Recommended from our members
Video content analysis for automated detection and tracking of humans in CCTV surveillance applications
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.The problems of achieving high detection rate with low false alarm rate for human detection and tracking in video sequence, performance scalability, and improving response time are addressed in this thesis. The underlying causes are the effect of scene complexity, human-to-human interactions, scale changes, and scene background-human interactions. A two-stage processing solution, namely, human detection, and human tracking with two novel pattern classifiers is presented. Scale independent human detection is achieved by processing in the wavelet domain using square wavelet features. These features used to characterise human silhouettes at different scales are similar to rectangular features used in [Viola 2001]. At the detection stage two detectors are combined to improve detection rate. The first detector is based on shape-outline of humans extracted from the scene using a reduced complexity outline extraction algorithm. A Shape mismatch measure is used to differentiate between the human and the background class. The second detector uses rectangular features as primitives for silhouette description in the wavelet domain. The marginal distribution of features collocated at a particular position on a candidate human (a patch of the image) is used to describe statistically the silhouette. Two similarity measures are computed between a candidate human and the model histograms of human and non human classes. The similarity measure is used to discriminate between the human and the non human class. At the tracking stage, a tracker based on joint probabilistic data association filter (JPDAF) for data association, and motion correspondence is presented. Track clustering is used to reduce hypothesis enumeration complexity. Towards improving response time with increase in frame dimension, scene complexity, and number of channels; a scalable algorithmic architecture and operating accuracy prediction technique is presented. A scheduling strategy for improving the response time and throughput by parallel processing is also presented
Sea-Surface Object Detection Based on Electro-Optical Sensors: A Review
Sea-surface object detection is critical for navigation safety of autonomous ships. Electrooptical (EO) sensors, such as video cameras, complement radar on board in detecting small obstacle
sea-surface objects. Traditionally, researchers have used horizon detection, background subtraction, and
foreground segmentation techniques to detect sea-surface objects. Recently, deep learning-based object
detection technologies have been gradually applied to sea-surface object detection. This article demonstrates a comprehensive overview of sea-surface object-detection approaches where the advantages
and drawbacks of each technique are compared, covering four essential aspects: EO sensors and image
types, traditional object-detection methods, deep learning methods, and maritime datasets collection. In
particular, sea-surface object detections based on deep learning methods are thoroughly analyzed and
compared with highly influential public datasets introduced as benchmarks to verify the effectiveness of
these approaches. The arti
Pedestrian Detection and Tracking in Urban Context Using a Mono-camera
Jalakäijate tuvastus ja jälgimine on üks tähtsamaid aspekte edasijõudnud sõitja abisüsteemides. Need süsteemid aitavad vältida ohtlikke olukordi, juhendades sõitjaid ja hoiatades ettetulevate riskide eest. Jalakäijate tuvastuse ja jälgimise põhiideed on tuvastada jalakäijad siis, kui nad on turvalises tsoonis ja ennustada nende asukohta ja suunda. Selle lõputöö eesmärk on uurida võimalikke meetodeid ja arendada nende põhjal hea algoritm jalakäijate tuvastuseks ja jälgimiseks.Selles lõputöös arendatud lahendus keskendub jalakäija täpsele tuvastamisele ja jälgimisele. Süsteemi täpsuse hindamiseks on saadud tulemusi võrreldud olemasolevate lahendustega.Pedestrian detection and tracking are one of the important aspects in Advanced Driver Assistance Systems. These systems help to avoid dangerous situations, by guiding drivers and warning them about the upcoming risks. The main ideas of pedestrian detection and tracking are to detect pedestrians, while they are in the secure zone, and predict their position and direction.The goal of this thesis is to examine possible methods and based on these, to develop a good pedestrian detection and tracking algorithm. The solution developed in this thesis, focuses on accurately detecting and tracking a pedestrian. In order to estimate the accuracy of the system, obtained results will be compared to the existing solutions
- …