7 research outputs found
Constellation design for future communication systems: a comprehensive survey
[EN] The choice of modulation schemes is a fundamental building block of wireless communication
systems. As a key component of physical layer design, they critically impact the expected communication
capacity and wireless signal robustness. Their design is also critical for the successful roll-out of wireless
standards that require a compromise between performance, efficiency, latency, and hardware requirements.
This paper presents a survey of constellation design strategies and associated outcomes for wireless
communication systems. The survey discusses their performance and complexity to address the need for
some desirable properties, including consistency, channel capacity, system performance, required demapping
architecture, flexibility, and independence. Existing approaches for constellation designs are investigated
using appropriate metrics and categorized based on their theoretical algorithm design. Next, their application
to different communication standards is analyzed in context, aiming at distilling general guidelines applicable
to the wireless building block design. Finally, the survey provides a discussion on design directions for future
communication system standardization processes.This work was supported in part by the Basque Government under Grant IT1234-19, in part by the PREDOC under
Program PRE_2020_2_0105, and in part by the Spanish Government through the Project PHANTOM (MCIU/AEI/FEDER, UE) under Gran
Channel Estimation in Coded Modulation Systems
With the outstanding performance of coded modulation techniques in fading channels,
much research efforts have been carried out on the design of communication
systems able to operate at low signal-to-noise ratios (SNRs). From this perspective,
the so-called iterative decoding principle has been applied to many signal processing
tasks at the receiver: demodulation, detection, decoding, synchronization and
channel estimation. Nevertheless, at low SNRs, conventional channel estimators do
not perform satisfactorily. This thesis is mainly concerned with channel estimation
issues in coded modulation systems where different diversity techniques are exploited
to combat fading in single or multiple antenna systems.
First, for single antenna systems in fast time-varying fading channels, the thesis
focuses on designing a training sequence by exploiting signal space diversity (SSD).
Motivated by the power/bandwidth efficiency of the SSD technique, the proposed
training sequence inserts pilot bits into the coded bits prior to constellation mapping
and signal rotation. This scheme spreads the training sequence during a transmitted
codeword and helps the estimator to track fast variation of the channel gains. A comprehensive
comparison between the proposed training scheme and the conventional
training scheme is then carried out, which reveals several interesting conclusions with
respect to both error performance of the system and mean square error of the channel
estimator.
For multiple antenna systems, different schemes are examined in this thesis for
the estimation of block-fading channels. For typical coded modulation systems with
multiple antennas, the first scheme makes a distinction between the iteration in the
channel estimation and the iteration in the decoding. Then, the estimator begins
iteration when the soft output of the decoder at the decoding iteration meets some
specified reliability conditions. This scheme guarantees the convergence of the iterative
receiver with iterative channel estimator. To accelerate the convergence process
and decrease the complexity of successive iterations, in the second scheme, the channel estimator estimates channel state information (CSI) at each iteration with a combination
of the training sequence and soft information. For coded modulation systems
with precoding technique, in which a precoder is used after the modulator, the training
sequence and data symbols are combined using a linear precoder to decrease the
required training overhead. The power allocation and the placement of the training
sequence to be precoded are obtained based on a lower bound on the mean square
error of the channel estimation. It is demonstrated that considerable performance
improvement is possible when the training symbols are embedded within data symbols
with an equi-spaced pattern. In the last scheme, a joint precoder and training
sequence is developed to maximize the achievable coding gain and diversity order
under imperfect CSI. In particular, both the asymptotic performance behavior of the
system with the precoded training scheme under imperfect CSI and the mean square
error of the channel estimation are derived to obtain achievable diversity order and
coding gain. Simulation results demonstrate that the joint optimized scheme outperforms
the existing training schemes for systems with given precoders in terms of error
rate and the amount of training overhead
Exploiting diversity in wireless channels with bit-interleaved coded modulation and iterative decoding (BICM-ID)
This dissertation studies a state-of-the-art bandwidth-efficient coded modulation technique, known as bit interleaved coded modulation with iterative decoding (BICM-ID), together with various diversity techniques to dramatically improve the performance of digital communication systems over wireless channels.
For BICM-ID over a single-antenna frequency non-selective fading channel, the problem of mapping over multiple symbols, i.e., multi-dimensional (multi-D) mapping, with 8-PSK constellation is investigated. An explicit algorithm to construct a good multi-D mapping of 8-PSK to improve the asymptotic performance of BICM-ID systems is introduced. By comparing the performance of the proposed mapping with an unachievable lower bound, it is conjectured that the proposed mapping is the global optimal mapping. The superiority of the proposed mapping over the best conventional (1-dimensional complex) mapping and the multi-D mapping found previously by computer search is thoroughly demonstrated.
In addition to the mapping issue in single-antenna BICM-ID systems, the use of signal space diversity (SSD), also known as linear constellation precoding (LCP), is considered in BICM-ID over frequency non-selective fading channels. The performance analysis of BICM-ID and complex N-dimensional signal space diversity is carried out to study its performance limitation, the choice of the rotation matrix and the design of a low-complexity receiver. Based on the design criterion obtained from a tight error bound, the optimality of the rotation matrix is established. It is shown that using the class of optimal rotation matrices, the performance of BICM-ID systems over a frequency non-selective Rayleigh fading channel approaches that of the BICM-ID systems over an additive white Gaussian noise (AWGN) channel when the dimension of the signal constellation increases. Furthermore, by exploiting the sigma mapping for any M-ary quadrature amplitude modulation (QAM) constellation, a very simple sub-optimal, yet effective iterative receiver structure suitable for signal constellations with large dimensions is proposed. Simulation results in various cases and conditions indicate that the proposed receiver can achieve the analytical performance bounds with low complexity.
The application of BICM-ID with SSD is then extended to the case of cascaded Rayleigh fading, which is more suitable to model mobile-to-mobile communication channels. By deriving the error bound on the asymptotic performance, it is first illustrated that for a small modulation constellation, a cascaded Rayleigh fading causes a much more severe performance degradation than a
conventional Rayleigh fading. However, BICM-ID employing SSD with a sufficiently large constellation can close the performance gap between the Rayleigh and cascaded Rayleigh fading channels, and their performance can closely approach that over an AWGN channel.
In the next step, the use of SSD in BICM-ID over frequency selective Rayleigh fading channels employing a multi-carrier modulation technique known as orthogonal frequency division multiplexing (OFDM) is studied. Under the assumption of correlated fading over subcarriers, a tight bound on the asymptotic error performance for the general case of applying SSD over all N subcarriers is derived and used to establish the best achievable asymptotic performance by SSD. It is then shown that precoding over subgroups of at least L subcarriers per group, where L is the number of channel taps, is sufficient to obtain this best asymptotic error performance, while significantly reducing the receiver complexity. The optimal joint subcarrier grouping and rotation matrix design is subsequently determined by solving the Vandermonde linear system. Illustrative examples show a good agreement between various analytical and simulation results.
Further, by combining the ideas of multi-D mapping and subcarrier grouping, a novel power and bandwidth-efficient bit-interleaved coded modulation with OFDM and iterative decoding (BI-COFDM-ID) in which multi-D mapping is performed over a group of subcarriers for broadband transmission in a frequency selective fading environment is proposed. A tight bound on the asymptotic error performance is developed, which shows that subcarrier mapping and grouping have independent impacts on the overall error performance, and hence they can be independently optimized. Specifically, it is demonstrated that the optimal subcarrier mapping is similar to the optimal multi-D mapping for BICM-ID in frequency non-selective Rayleigh fading environment, whereas the optimal subcarrier grouping is the same with that of OFDM with SSD. Furthermore, analytical and simulation results show that the proposed system with the combined optimal subcarrier mapping and grouping can achieve the full channel diversity without using SSD and provide significant coding gains as compared to the previously studied BI-COFDM-ID with the same power, bandwidth and receiver complexity.
Finally, the investigation is extended to the application of BICM-ID over a multiple-input multiple-output (MIMO) system equipped with multiple antennas at both the transmitter and the receiver to exploit both time and spatial diversities, where neither the transmitter nor the receiver knows the channel fading coefficients. The concentration is on the class of unitary constellation, due to its advantages in terms of both information-theoretic capacity and error probability. The tight error bound with respect to the asymptotic performance is also derived for any given unitary constellation and mapping rule. Design criteria regarding the choice of unitary constellation and mapping are then established. Furthermore, by using the unitary constellation obtained from orthogonal design with quadrature phase-shift keying (QPSK or 4-PSK) and 8-PSK, two different mapping rules are proposed. The first mapping rule gives the most suitable mapping for systems that do not implement iterative processing, which is similar to a Gray mapping in coherent channels. The second mapping rule yields the best mapping for systems with iterative decoding. Analytical and simulation results show that with the proposed mappings of the unitary constellations obtained from orthogonal designs, the asymptotic error performance of the iterative systems can closely approach a lower bound which is applicable to any unitary constellation and mapping
Méthodes de codage et d'estimation adaptative appliquées aux communications sans fil
Les recherches et les contributions présentées portent sur des techniques de traitement du signal appliquées aux communications sans fil. Elles s’articulent autour des points suivants : (1) l’estimation adaptative de canaux de communication dans différents contextes applicatifs, (2) la correction de bruit impulsionnel et la réduction du niveau de PAPR (Peak to Average Power Ratio) dans un système multi-porteuse, (3) l’optimisation de schémas de transmission pour la diffusion sur des canaux gaussiens avec/sans contrainte de sécurité, (4) l’analyse, l’interprétation et l’amélioration des algorithmes de décodage itératif par le biais de l’optimisation, de la théorie des jeux et des outils statistiques. L’accent est plus particulièrement mis sur le dernier thème
Low-Density Parity-Check Coded High-order Modulation Schemes
In this thesis, we investigate how to support reliable data transmissions at high speeds in future communication systems, such as 5G/6G, WiFi, satellite, and optical communications. One of the most fundamental problems in these communication systems is how to reliably transmit information with a limited number of resources, such as power and spectral.
To obtain high spectral efficiency, we use coded modulation (CM), such as bit-interleaved coded modulation (BICM) and delayed BICM (DBICM). To be specific, BICM is a pragmatic implementation of CM which has been largely adopted in both industry and academia. While BICM approaches CM capacity at high rates, the capacity gap between BICM and CM is still noticeable at lower code rates. To tackle this problem, DBICM, as a variation of BICM, introduces a delay module to create a dependency between multiple codewords, which enables us to exploit extrinsic information from the decoded delayed sub-blocks to improve the detection of the undelayed sub-blocks. Recent work shows that DBICM improves capacity over BICM. In addition, BICM and DBICM schemes protect each bit-channel differently, which is often referred to as the unequal error protection (UEP) property. Therefore, bit mapping designs are important for constructing pragmatic BICM and DBICM. To provide reliable communication, we have jointly designed bit mappings in DBICM and irregular low-density parity-check (LDPC) codes. For practical considerations, spatially coupled LDPC (SC-LDPC) codes have been considered as well. Specifically, we have investigated the joint design of the multi-chain SC-LDPC and the BICM bit mapper. In addition, the design of SC-LDPC codes with improved decoding threshold performance and reduced rate loss has been investigated in this thesis as well.
The main body of this thesis consists of three parts. In the first part, considering Gray-labeled square M-ary quadrature amplitude modulation (QAM) constellations, we investigate the optimal delay scheme with the largest spectrum efficiency of DBICM for a fixed maximum number of delayed time slots and a given signal-to-noise ratio. Furthermore, we jointly optimize degree distributions and channel assignments of LDPC codes using protograph-based extrinsic information transfer charts. In addition, we proposed a constrained progressive edge growth-like algorithm to jointly construct LDPC codes and bit mappings for DBICM, taking the capacity of each bit-channel into account. Simulation results demonstrate that the designed LDPC-coded DBICM systems significantly outperform LDPC-coded BICM systems. In the second part, we proposed a windowed decoding algorithm for DBICM, which uses the extrinsic information of both the decoded delayed and undelayed sub-blocks, to improve the detection for all sub-blocks. We show that the proposed windowed decoding significantly outperforms the original decoding, demonstrating the effectiveness of the proposed decoding algorithm. In the third part, we apply multi-chain SC-LDPC to BICM. We investigate various connections for multi-chain SC-LDPC codes and bit mapping designs and analyze the performance of the multi-chain SC-LDPC codes over the equivalent binary erasure channels via density evolution. Numerical results demonstrate the superiority of the proposed design over existing connected-chain ensembles and over single-chain ensembles with the existing bit mapping design
Advanced receivers for distributed cooperation in mobile ad hoc networks
Mobile ad hoc networks (MANETs) are rapidly deployable wireless communications systems, operating with minimal coordination in order to avoid spectral efficiency losses caused by overhead. Cooperative transmission schemes are attractive for MANETs, but the distributed nature of such protocols comes with an increased level of interference, whose impact is further amplified by the need to push the limits of energy and spectral efficiency. Hence, the impact of interference has to be mitigated through with the use PHY layer signal processing algorithms with reasonable computational complexity. Recent advances in iterative digital receiver design techniques exploit approximate Bayesian inference and derivative message passing techniques to improve the capabilities of well-established turbo detectors. In particular, expectation propagation (EP) is a flexible technique which offers attractive complexity-performance trade-offs in situations where conventional belief propagation is limited by computational complexity. Moreover, thanks to emerging techniques in deep learning, such iterative structures are cast into deep detection networks, where learning the algorithmic hyper-parameters further improves receiver performance. In this thesis, EP-based finite-impulse response decision feedback equalizers are designed, and they achieve significant improvements, especially in high spectral efficiency applications, over more conventional turbo-equalization techniques, while having the advantage of being asymptotically predictable. A framework for designing frequency-domain EP-based receivers is proposed, in order to obtain detection architectures with low computational complexity. This framework is theoretically and numerically analysed with a focus on channel equalization, and then it is also extended to handle detection for time-varying channels and multiple-antenna systems. The design of multiple-user detectors and the impact of channel estimation are also explored to understand the capabilities and limits of this framework. Finally, a finite-length performance prediction method is presented for carrying out link abstraction for the EP-based frequency domain equalizer. The impact of accurate physical layer modelling is evaluated in the context of cooperative broadcasting in tactical MANETs, thanks to a flexible MAC-level simulato