1,479 research outputs found
Beamforming Techniques for Non-Orthogonal Multiple Access in 5G Cellular Networks
In this paper, we develop various beamforming techniques for downlink
transmission for multiple-input single-output (MISO) non-orthogonal multiple
access (NOMA) systems. First, a beamforming approach with perfect channel state
information (CSI) is investigated to provide the required quality of service
(QoS) for all users. Taylor series approximation and semidefinite relaxation
(SDR) techniques are employed to reformulate the original non-convex power
minimization problem to a tractable one. Further, a fairness-based beamforming
approach is proposed through a max-min formulation to maintain fairness between
users. Next, we consider a robust scheme by incorporating channel
uncertainties, where the transmit power is minimized while satisfying the
outage probability requirement at each user. Through exploiting the SDR
approach, the original non-convex problem is reformulated in a linear matrix
inequality (LMI) form to obtain the optimal solution. Numerical results
demonstrate that the robust scheme can achieve better performance compared to
the non-robust scheme in terms of the rate satisfaction ratio. Further,
simulation results confirm that NOMA consumes a little over half transmit power
needed by OMA for the same data rate requirements. Hence, NOMA has the
potential to significantly improve the system performance in terms of transmit
power consumption in future 5G networks and beyond.Comment: accepted to publish in IEEE Transactions on Vehicular Technolog
Random Access in Uplink Massive MIMO Systems: How to exploit asynchronicity and excess antennas
Massive MIMO systems, where the base stations are equipped with hundreds of
antennas, are an attractive way to handle the rapid growth of data traffic. As
the number of users increases, the initial access and handover in contemporary
networks will be flooded by user collisions. In this work, we propose a random
access procedure that resolves collisions and also performs timing, channel,
and power estimation by simply utilizing the large number of antennas
envisioned in massive MIMO systems and the inherent timing misalignments of
uplink signals during network access and handover. Numerical results are used
to validate the performance of the proposed solution under different settings.
It turns out that the proposed solution can detect all collisions with a
probability higher than 90%, at the same time providing reliable timing and
channel estimates. Moreover, numerical results demonstrate that it is robust to
overloaded situations.Comment: submitted to IEEE Globecom 2016, Washington, DC US
Two-Layered Superposition of Broadcast/Multicast and Unicast Signals in Multiuser OFDMA Systems
We study optimal delivery strategies of one common and independent
messages from a source to multiple users in wireless environments. In
particular, two-layered superposition of broadcast/multicast and unicast
signals is considered in a downlink multiuser OFDMA system. In the literature
and industry, the two-layer superposition is often considered as a pragmatic
approach to make a compromise between the simple but suboptimal orthogonal
multiplexing (OM) and the optimal but complex fully-layered non-orthogonal
multiplexing. In this work, we show that only two-layers are necessary to
achieve the maximum sum-rate when the common message has higher priority than
the individual unicast messages, and OM cannot be sum-rate optimal in
general. We develop an algorithm that finds the optimal power allocation over
the two-layers and across the OFDMA radio resources in static channels and a
class of fading channels. Two main use-cases are considered: i) Multicast and
unicast multiplexing when users with uplink capabilities request both
common and independent messages, and ii) broadcast and unicast multiplexing
when the common message targets receive-only devices and users with uplink
capabilities additionally request independent messages. Finally, we develop a
transceiver design for broadcast/multicast and unicast superposition
transmission based on LTE-A-Pro physical layer and show with numerical
evaluations in mobile environments with multipath propagation that the capacity
improvements can be translated into significant practical performance gains
compared to the orthogonal schemes in the 3GPP specifications. We also analyze
the impact of real channel estimation and show that significant gains in terms
of spectral efficiency or coverage area are still available even with
estimation errors and imperfect interference cancellation for the two-layered
superposition system
Frequency-domain transmit processing for MIMO SC-FDMA in wideband propagation channels
This document is made available in accordance with publisher policies. Please cite only the published version using the reference above. Full terms of use are available
Timing and Carrier Synchronization in Wireless Communication Systems: A Survey and Classification of Research in the Last 5 Years
Timing and carrier synchronization is a fundamental requirement for any wireless communication system to work properly. Timing synchronization is the process by which a receiver node determines the correct instants of time at which to sample the incoming signal. Carrier synchronization is the process by which a receiver adapts the frequency and phase of its local carrier oscillator with those of the received signal. In this paper, we survey the literature over the last 5 years (2010–2014) and present a comprehensive literature review and classification of the recent research progress in achieving timing and carrier synchronization in single-input single-output (SISO), multiple-input multiple-output (MIMO), cooperative relaying, and multiuser/multicell interference networks. Considering both single-carrier and multi-carrier communication systems, we survey and categorize the timing and carrier synchronization techniques proposed for the different communication systems focusing on the system model assumptions for synchronization, the synchronization challenges, and the state-of-the-art synchronization solutions and their limitations. Finally, we envision some future research directions
Técnicas de igualização adaptativas com estimativas imperfeitas do canal para os futuros sistemas 5G
Wireless communication networks have been continuously experiencing an exponential growth since their inception. The overwhelming demand for high data rates, support of a large number of users while mitigating disruptive interference are the constant research focus and it has led to the creation of new technologies and efficient techniques.
Orthogonal frequency division multiplexing (OFDM) is the most common example of a technology that has come to the fore in this past decade as it provided a simple and generally ideal platform for wireless data transmission.
It’s drawback of a rather high peak-to-average power ratio (PAPR) and sensitivity to phase noise, which in turn led to the adoption of alternative techniques, such as the single carrier systems with frequency domain equalization (SC-FDE) or the multi carrier systems with code division multiple access (MC-CDMA), but the nonlinear Frequency Domain Equalizers (FDE) have been of special note due to their improved performance. From these, the Iterative Block Decision Feedback Equalizer (IB-DFE) has proven itself especially promising due to its compatibility with space diversity, MIMO systems and CDMA schemes.
However, the IB-DFE requires the system to have constant knowledge of the communication channel properties, that is, to have constantly perfect Channel State Information (CSI), which is both unrealistic and impractical to implement.
In this dissertation we shall design an altered IB-DFE receiver that is able to properly detect signals from SC-FDMA based transmitters, even with constantly erroneous channel states. The results shall demonstrate that the proposed equalization scheme is robust to imperfect CSI (I-CSI) situations, since its performance is constantly close to the perfect CSI case, within just a few iterations.Redes sem fios têm crescido de maneira contínua e exponencial desde a sua incepção. A tremenda exigência para altas taxas de dados e o suporte para um elevado número de utilizadores sem aumentar a interferência disruptiva originada por estes são alguns dos focos que levaram ao desenvolvimento de técnicas de compensação e novas tecnologias.
“Orthogonal frequency division multiplexing” (OFDM) é um dos exemplos de tecnologias que se destacaram nesta última década, visto ter fornecido uma plataforma para transmissão de dados sem-fio eficaz e simples.
O seu maior problema é a alta “peak-to-average power ratio” (PAPR) e a sua sensibilidade a ruído de fase que deram motivo à adoção de técnicas alternativas, tais como os sistemas “single carrier” com “frequency domain equalization” (SC-FDE) ou os sistemas “multi-carrier” com “code division multiple access” (MC-CDMA), mas equalizadores não lineares no domínio de frequência têm sido alvo de especial atenção devido ao seu melhor desempenho. Destes, o “iterative block decision feedback equalizer” (IB-DFE) tem-se provado especialmente promissor devido à sua compatibilidade com técnicas de diversidade no espaço, sistemas MIMO e esquemas CDMA.
No entanto, IB-DFE requer que o sistema tenha constante conhecimento das propriedades dos canais usados, ou seja, necessita de ter perfeito “channel state information” (CSI) constantemente, o que é tanto irrealista como impossível de implementar.
Nesta dissertação iremos projetar um recetor IB-DFE alterado de forma a conseguir detetar sinais dum transmissor baseado em tecnologia SC-FDMA, mesmo com a informação de estado de canal errada. Os resultados irão então demonstrar que o novo esquema de equalização proposto é robusto para situações de CSI imperfeito (I-CSI), visto que o seu desempenho se mantém próximo dos valores esperados para CSI perfeito, em apenas algumas iterações.Mestrado em Engenharia Eletrónica e Telecomunicaçõe
- …