High speed, precision motion strategies for lightweight structures

Research on space telerobotics is summarized. Adaptive control experiments on the Robotic Arm, Large and Flexible (RALF) were preformed and are documented, along with a joint controller design for the Small Articulated Manipulator (SAM), which is mounted on the RALF. A control algorithm is described as a robust decentralized adaptive control based on a bounded uncertainty approach. Dynamic interactions between SAM and RALF are examined. Unstability of the manipulator is studied from the perspective that the inertial forces generated could actually be used to more rapidly damp out the flexible manipulator's vibration. Currently being studied is the modeling of the constrained dynamics of flexible arms

Advanced Strategies for Robot Manipulators

Amongst the robotic systems, robot manipulators have proven themselves to be of increasing importance and are widely adopted to substitute for human in repetitive and/or hazardous tasks. Modern manipulators are designed complicatedly and need to do more precise, crucial and critical tasks. So, the simple traditional control methods cannot be efficient, and advanced control strategies with considering special constraints are needed to establish. In spite of the fact that groundbreaking researches have been carried out in this realm until now, there are still many novel aspects which have to be explored

Comparison of polynomial profiles and input shaping for industrial applications

Command shaping creates reference commands that reduce residual vibrations in a flexible system. This thesis examines the use of command shaping for flexible system control in three industrial applications: cam-follower systems, sloshing liquids, and cherrypickers. One common type of command shaping is command smoothing which creates a smooth transition between setpoints. A specific type of command smoothing used in cam-follower systems is the polynomial profile. An alternative technique to reduce vibration in flexible systems is input shaping. In this thesis, input-shaped commands are compared to polynomial profiles for applications requiring both vibration suppression and fast motion. Simulation and experimental results show that input shaping is faster than polynomial profiles and provides a simple approach to suppressing residual vibration. Secondly, significant experimental contributions have been made in the area of slosh control. The oscillation of liquids in a container can cause liquid spillage or can cause stability issues, especially in space vehicles. In the past, a number of control techniques have been proposed, but only a few recommend the use of input shaping. This thesis describes the use of command shaping to limit slosh. Results are supported by numerical and experimental testing. Input-shaped commands reduce residual slosh amplitude compared to unshaped commands and polynomial profiles. Input-shaped commands can also accommodate uncertainties and changes in the sloshing frequencies. Lastly, a small-scale cherrypicker was constructed to study the use of input-shaping control on these types of aerial lifts. Cherrypickers have flexible dynamic effects that can cause dangerous and life-threatening situations. To study this class of machines and to provide future students an experimental testbed, several design criteria were established before construction began. The resulting machine achieved most design objectives, including a simple-to-use graphical user interface and accurate state measurements. Robust input-shaping controllers were implemented to limit endpoint vibration. The design of the cherrypicker is discussed and experimental results are reported.M.S.Committee Chair: William Singhose; Committee Member: Al Ferri; Committee Member: Jun Ued

Precise tip positioning of a flexible manipulator using resonant control

A single-link flexible manipulator is fabricated to represent a typical flexible robotic arm. This flexible manipulator is modeled as a SIMO system with the motor-torque as the input and the hub angle and the tip position as the outputs. The two transfer functions are identified using a frequency-domain system identification method. A feedback loop around the hub angle response with a resonant controller is designed to damp the resonant modes. A high gain integral controller is also designed to achieve zero steady-state error in the tip position response. Experiments are performed to demonstrate the effectiveness of the proposed control scheme

Wave-based control of under-actuated flexible structures with strong external disturbing forces

Wave-based control of under-actuated, flexible systems has many advantages over other methods. It considers actuator motion as launching a mechanical wave into the flexible system which it absorbs on its return to the actuator. The launching and absorbing proceed simultaneously. This simple, intuitive idea leads to robust, generic, highly efficient, precise, adaptable controllers, allowing rapid and almost vibrationless re-positioning of the system, using only sensors collocated at the actuator-system interface. It has been very successfully applied to simple systems such as mass-spring strings, systems of Euler-Bernoulli beams, planar mass-spring arrays, and flexible three-dimensional space structures undergoing slewing motion. In common with most other approaches, this work also assumed that, during a change of position, the forces from the environment were negligible in comparison with internal forces and torques. This assumption is not always valid. Strong external forces considerably complicate the flexible control problem, especially when unknown, unexpected or unmodelled. The current work extends the wave-based strategy to systems experiencing significant external disturbing forces, whether enduring or transient. The work also provides further robustness to sensor errors. The strategy has the controller learn about the disturbances and compensate for them, yet without needing new sensors, measurements or models beyond those of standard wave-based control