Spectrum sensing for cognitive radio and radar systems

The use of the radio frequency spectrum is increasing at a rapid rate. Reliable and efficient operation in a crowded radio spectrum requires innovative solutions and techniques. Future wireless communication and radar systems should be aware of their surrounding radio environment in order to have the ability to adapt their operation to the effective situation. Spectrum sensing techniques such as detection, waveform recognition, and specific emitter identification are key sources of information for characterizing the surrounding radio environment and extracting valuable information, and consequently adjusting transceiver parameters for facilitating flexible, efficient, and reliable operation. In this thesis, spectrum sensing algorithms for cognitive radios and radar intercept receivers are proposed. Single-user and collaborative cyclostationarity-based detection algorithms are proposed: Multicycle detectors and robust nonparametric spatial sign cyclic correlation based fixed sample size and sequential detectors are proposed. Asymptotic distributions of the test statistics under the null hypothesis are established. A censoring scheme in which only informative test statistics are transmitted to the fusion center is proposed for collaborative detection. The proposed detectors and methods have the following benefits: employing cyclostationarity enables distinction among different systems, collaboration mitigates the effects of shadowing and multipath fading, using multiple strong cyclic frequencies improves the performance, robust detection provides reliable performance in heavy-tailed non-Gaussian noise, sequential detection reduces the average detection time, and censoring improves energy efficiency. In addition, a radar waveform recognition system for classifying common pulse compression waveforms is developed. The proposed supervised classification system classifies an intercepted radar pulse to one of eight different classes based on the pulse compression waveform: linear frequency modulation, Costas frequency codes, binary codes, as well as Frank, P1, P2, P3, and P4 polyphase codes. A robust M-estimation based method for radar emitter identification is proposed as well. A common modulation profile from a group of intercepted pulses is estimated and used for identifying the radar emitter. The M-estimation based approach provides robustness against preprocessing errors and deviations from the assumed noise model

Multi-stage Wireless Signal Identification for Blind Interception Receiver Design

Protection of critical wireless infrastructure from malicious attacks has become increasingly important in recent years, with the widespread deployment of various wireless technologies and dramatic growth in user populations. This brings substantial technical challenges to the interception receiver design to sense and identify various wireless signals using different transmission technologies. The key requirements for the receiver design include estimation of the signal parameters/features and classification of the modulation scheme. With the proper identification results, corresponding signal interception techniques can be developed, which can be further employed to enhance the network behaviour analysis and intrusion detection. In detail, the initial stage of the blind interception receiver design is to identify the signal parameters. In the thesis, two low-complexity approaches are provided to realize the parameter estimation, which are based on iterative cyclostationary analysis and envelope spectrum estimation, respectively. With the estimated signal parameters, automatic modulation classification (AMC) is performed to automatically identify the modulation schemes of the transmitted signals. A novel approach is presented based on Gaussian Mixture Models (GMM) in Chapter 4. The approach is capable of mitigating the negative effect from multipath fading channel. To validate the proposed design, the performance is evaluated under an experimental propagation environment. The results show that the proposed design is capable of adapting blind parameter estimation, realize timing and frequency synchronization and classifying the modulation schemes with improved performances

Robust spectrum sensing techniques for cognitive radio networks

Cognitive radio is a promising technology that improves the spectral utilisation by allowing unlicensed secondary users to access underutilised frequency bands in an opportunistic manner. This task can be carried out through spectrum sensing: the secondary user monitors the presence of primary users over the radio spectrum periodically to avoid harmful interference to the licensed service. Traditional energy based sensing methods assume the value of noise power as prior knowledge. They suffer from the noise uncertainty problem as even a mild noise level mismatch will lead to significant performance loss. Hence, developing an efficient robust detection method is important. In this thesis, a novel sensing technique using the F-test is proposed. By assuming a multiple antenna assisted receiver, this detector uses the F-statistic as the test statistic which offers absolute robustness against the noise variance uncertainty. In addition, since the channel state information (CSI) is required to be known, the impact of CSI uncertainty is also discussed. Results show the F-test based sensing method performs better than the energy detector and has a constant false alarm probability, independent of the accuracy of the CSI estimate. Another main topic of this thesis is to address the sensing problem for non-Gaussian noise. Most of the current sensing techniques consider Gaussian noise as implied by the central limit theorem (CLT) and it offers mathematical tractability. However, it sometimes fails to model the noise in practical wireless communication systems, which often shows a non-Gaussian heavy-tailed behaviour. In this thesis, several sensing algorithms are proposed for non-Gaussian noise. Firstly, a non-parametric eigenvalue based detector is developed by exploiting the eigenstructure of the sample covariance matrix. This detector is blind as no information about the noise, signal and channel is required. In addition, the conventional energy detector and the aforementioned F-test based detector are generalised to non-Gaussian noise, which require the noise power and CSI to be known, respectively. A major concern of these detection methods is to control the false alarm probability. Although the test statistics are easy to evaluate, the corresponding null distributions are difficult to obtain as they depend on the noise type which may be unknown and non-Gaussian. In this thesis, we apply the powerful bootstrap technique to overcome this difficulty. The key idea is to reuse the data through resampling instead of repeating the experiment a large number of times. By using the nonparametric bootstrap approach to estimate the null distribution of the test statistic, the assumptions on the data model are minimised and no large sample assumption is invoked. In addition, for the F-statistic based method, we also propose a degrees-of-freedom modification approach for null distribution approximation. This method assumes a known noise kurtosis and yields closed form solutions. Simulation results show that in non-Gaussian noise, all the three detectors maintain the desired false alarm probability by using the proposed algorithms. The F-statistic based detector performs the best, e.g., to obtain a 90% detection probability in Laplacian noise, it provides a 2.5 dB and 4 dB signal-to-noise ratio (SNR) gain compared with the eigenvalue based detector and the energy based detector, respectively