Symbol-level and Multicast Precoding for Multiuser Multiantenna Downlink: A State-of-the-art, Classification and Challenges

Precoding has been conventionally considered as an effective means of mitigating or exploiting the interference in the multiantenna downlink channel, where multiple users are simultaneously served with independent information over the same channel resources. The early works in this area were focused on transmitting an individual information stream to each user by constructing weighted linear combinations of symbol blocks (codewords). However, more recent works have moved beyond this traditional view by: i) transmitting distinct data streams to groups of users and ii) applying precoding on a symbol-per-symbol basis. In this context, the current survey presents a unified view and classification of precoding techniques with respect to two main axes: i) the switching rate of the precoding weights, leading to the classes of block-level and symbol-level precoding, ii) the number of users that each stream is addressed to, hence unicast, multicast, and broadcast precoding. Furthermore, the classified techniques are compared through representative numerical results to demonstrate their relative performance and uncover fundamental insights. Finally, a list of open theoretical problems and practical challenges are presented to inspire further research in this area

The electronically steerable parasitic array radiator antenna for wireless communications : signal processing and emerging techniques

Smart antenna technology is expected to play an important role in future wireless communication networks in order to use the spectrum efficiently, improve the quality of service, reduce the costs of establishing new wireless paradigms and reduce the energy consumption in wireless networks. Generally, smart antennas exploit multiple widely spaced active elements, which are connected to separate radio frequency (RF) chains. Therefore, they are only applicable to base stations (BSs) and access points, by contrast with modern compact wireless terminals with constraints on size, power and complexity. This dissertation considers an alternative smart antenna system the electronically steerable parasitic array radiator (ESPAR) which uses only a single RF chain, coupled with multiple parasitic elements. The ESPAR antenna is of significant interest because of its flexibility in beamforming by tuning a number of easy-to-implement reactance loads connected to parasitic elements; however, parasitic elements require no expensive RF circuits. This work concentrates on the study of the ESPAR antenna for compact transceivers in order to achieve some emerging techniques in wireless communications. The work begins by presenting the work principle and modeling of the ESPAR antenna and describes the reactance-domain signal processing that is suited to the single active antenna array, which are fundamental factors throughout this thesis. The major contribution in this chapter is the adaptive beamforming method based on the ESPAR antenna. In order to achieve fast convergent beamforming for the ESPAR antenna, a modified minimum variance distortionless response (MVDR) beamfomer is proposed. With reactance-domain signal processing, the ESPAR array obtains a correlation matrix of receive signals as the input to the MVDR optimization problem. To design a set of feasible reactance loads for a desired beampattern, the MVDR optimization problem is reformulated as a convex optimization problem constraining an optimized weight vector close to a feasible solution. Finally, the necessary reactance loads are optimized by iterating the convex problem and a simple projector. In addition, the generic algorithm-based beamforming method has also studied for the ESPAR antenna. Blind interference alignment (BIA) is a promising technique for providing an optimal degree of freedom in a multi-user, multiple-inputsingle-output broadcast channel, without the requirements of channel state information at the transmitters. Its key is antenna mode switching at the receive antenna. The ESPAR antenna is able to provide a practical solution to beampattern switching (one kind of antenna mode switching) for the implementation of BIA. In this chapter, three beamforming methods are proposed for providing the required number of beampatterns that are exploited across one super symbol for creating the channel fluctuation patterns seen by receivers. These manually created channel fluctuation patterns are jointly combined with the designed spacetime precoding in order to align the inter-user interference. Furthermore, the directional beampatterns designed in the ESPAR antenna are demonstrated to improve the performance of BIA by alleviating the noise amplification. The ESPAR antenna is studied as the solution to interference mitigation in small cell networks. Specifically, ESPARs analog beamforming presented in the previous chapter is exploited to suppress inter-cell interference for the system scenario, scheduling only one user to be served by each small BS at a single time. In addition, the ESPAR-based BIA is employed to mitigate both inter-cell and intracell interference for the system scenario, scheduling a small number of users to be simultaneously served by each small BS for a single time. In the cognitive radio (CR) paradigm, the ESPAR antenna is employed for spatial spectrum sensing in order to utilize the new angle dimension in the spectrum space besides the conventional frequency, time and space dimensions. The twostage spatial spectrum sensing method is proposed based on the ESPAR antenna being targeted at identifying white spectrum space, including the new angle dimension. At the first stage, the occupancy of a specific frequency band is detected by conventional spectrum-sensing methods, including energy detector and eigenvalue-based methods implemented with the switched-beam ESPAR antenna. With the presence of primary users, their directions are estimated at the second stage, by high-resolution angle-of-arrival (AoA) estimation algorithms. Specifically, the compressive sensing technology has been studied for AoA detection with the ESPAR antenna, which is demonstrated to provide high-resolution estimation results and even to outperform the reactance-domain multiple signal classification

Reconfigurable Antennas for Beam-Space MIMO Transmission with a Single Radio

MIMO techniques allow remarkable improvements in the reliability and/or transmission rate of wireless communication systems. However, there are several major challenges towards the implementation of conventional MIMO concept in terminals with size, cost, and power constraints. Firstly, insufficient space impedes the design of efficient and decorrelated MIMO antennas. Second, MIMO traditionally demands each antenna to be fed by its own RF chain, which in turn results in greater hardware complexity, larger power consumption, and higher implementation cost. Among all reduced-complexity and antenna-decoupling schemes proposed so far, the so-called beam-space MIMO has attracted a great deal of interest as a potential solution for addressing both problems concurrently. The key idea therein is to engineer the radiation pattern of a single-feed antenna structure for each symbol period, such that multiple independent symbols directly modulate a predefined set of orthogonal virtual patterns in the far-field, therefore allowing true MIMO transmission using a single RF chain and a compact antenna structure. More important in practice, the transmitted information can be retrieved using a conventional MIMO receiver. However, the transformation of this idea into reality entails dealing with various practical aspects that are commonly overlooked in theoretical and conceptual developments. This dissertation explores the beam-space MIMO concept from the perspective of the antenna engineering, and aims at addressing several key issues associated with the actual design and implementation of beam-space MIMO systems. The early developments of beam-space MIMO concerned switched parasitic arrays. However, the requirement of utilizing several physically-separate radiators is inconvenient for practicable implementation in compact portable devices. To solve this problem, a single-radiator load-modulated antenna solution is proposed in this dissertation. Another primary challenge consists in emulating high-order modulation schemes such as PSK with realistic hardware. Here, an efficient beam-space MIMO strategy is developed, which allows transmitting PSK data streams of any modulation order using only purely reactive reconfigurable loads, and without the need for a symbol-rate dynamic matching network. The approach is illustrated by the design and fabrication of a realistic antenna for QPSK signaling. The performance of a beam-space MIMO system which utilizes the fabricated antenna is then investigated through over-the-air experiments, and compared with conventional MIMO in realistic environments. Embedding information in the radiation patterns, beam-space MIMO systems are expected to be inherently prone to multiplexing performance degradation in the presence of external field perturbation. This makes the study of near-field interaction influence on beam-space MIMO distinct from those carried out for the case of conventional systems. This issue is considered for the first time in this dissertation. Moreover, like any reconfigurable system, a beam-space MIMO system may suffer from bandwidth expansion of the transmitted signals. The final part of the work is directed towards this important issue. To reduce out-of-band radiation effect, a solution based on shaping the time-domain response of the reconfigurable components is presented. The studies presented in this thesis constitute a crucial step towards MIMO with simpler and cheaper hardware for real-life terminals

MIMO Systems

In recent years, it was realized that the MIMO communication systems seems to be inevitable in accelerated evolution of high data rates applications due to their potential to dramatically increase the spectral efficiency and simultaneously sending individual information to the corresponding users in wireless systems. This book, intends to provide highlights of the current research topics in the field of MIMO system, to offer a snapshot of the recent advances and major issues faced today by the researchers in the MIMO related areas. The book is written by specialists working in universities and research centers all over the world to cover the fundamental principles and main advanced topics on high data rates wireless communications systems over MIMO channels. Moreover, the book has the advantage of providing a collection of applications that are completely independent and self-contained; thus, the interested reader can choose any chapter and skip to another without losing continuity

Advanced Trends in Wireless Communications

Physical limitations on wireless communication channels impose huge challenges to reliable communication. Bandwidth limitations, propagation loss, noise and interference make the wireless channel a narrow pipe that does not readily accommodate rapid flow of data. Thus, researches aim to design systems that are suitable to operate in such channels, in order to have high performance quality of service. Also, the mobility of the communication systems requires further investigations to reduce the complexity and the power consumption of the receiver. This book aims to provide highlights of the current research in the field of wireless communications. The subjects discussed are very valuable to communication researchers rather than researchers in the wireless related areas. The book chapters cover a wide range of wireless communication topics