A constructive and unifying framework for zero-bit watermarking

In the watermark detection scenario, also known as zero-bit watermarking, a watermark, carrying no hidden message, is inserted in content. The watermark detector checks for the presence of this particular weak signal in content. The article looks at this problem from a classical detection theory point of view, but with side information enabled at the embedding side. This means that the watermark signal is a function of the host content. Our study is twofold. The first step is to design the best embedding function for a given detection function, and the best detection function for a given embedding function. This yields two conditions, which are mixed into one `fundamental' partial differential equation. It appears that many famous watermarking schemes are indeed solution to this `fundamental' equation. This study thus gives birth to a constructive framework unifying solutions, so far perceived as very different.Comment: submitted to IEEE Trans. on Information Forensics and Securit

Matched subspace detection with hypothesis dependent noise power

We consider the problem of detecting a subspace signal in white Gaussian noise when the noise power may be different under the null hypothesis—where it is assumed to be known—and the alternative hypothesis. This situation occurs when the presence of the signal of interest (SOI) triggers an increase in the noise power. Accordingly, it may be relevant in the case of a mismatch between the actual SOI subspace and its presumed value, resulting in a modelling error. We derive the generalized likelihood ratio test (GLRT) for the problem at hand and contrast it with the GLRT which assumes known and equal noise power under the two hypotheses. A performance analysis is carried out and the distributions of the two test statistics are derived. From this analysis, we discuss the differences between the two detectors and provide explanations for the improved performance of the new detector. Numerical simulations attest to the validity of the analysis

Improving the chromatic dispersion tolerance in long-haul fibre links using the coherent optical orthogonal frequency division multiplexing

Numerical simulations of the coherent optical orthogonal frequency division multiplexing modems are undertaken to investigate the effect of the adaptive modulation, the number of sub-carriers, the cyclic prefix (CP) length, the clipping ratio, quantisation bit resolution and the sampling speed of analogue-to-digital converters (ADCs) on the chromatic dispersion (CD) of a single mode fibre (SMF) at data rates up to 80 Gbps. The use of a large number of sub-carriers is more effective in combating fibre dispersion than employing a long CP; moreover, the optimum number of sub-carriers in the presence of both SMF non-linearities and CD has been identified. The authors show that using a high bit resolution ADC with a high clipping ratio, the transmission distance can be increased at specific data rates. Furthermore, it is shown that ADCs with a low sampling speed also improve the system tolerance to the fibre CD. In addition, simulation results show that the use of adaptive modulation schemes improves spectrum usage efficiency, thus resulting in higher tolerance to the CD when compared with the case in which identical modulation formats are adopted across all sub-carriers

Low-Power, High-Speed Transceivers for Network-on-Chip Communication

Networks on chips (NoCs) are becoming popular as they provide a solution for the interconnection problems on large integrated circuits (ICs). But even in a NoC, link-power can become unacceptably high and data rates are limited when conventional data transceivers are used. In this paper, we present a low-power, high-speed source-synchronous link transceiver which enables a factor 3.3 reduction in link power together with an 80% increase in data-rate. A low-swing capacitive pre-emphasis transmitter in combination with a double-tail sense-amplifier enable speeds in excess of 9 Gb/s over a 2 mm twisted differential interconnect, while consuming only 130 fJ/transition without the need for an additional supply. Multiple transceivers can be connected back-to-back to create a source-synchronous transceiver-chain with a wave-pipelined clock, operating with 6sigma offset reliability at 5 Gb/s

A control algorithm for autonomous optimization of extracellular recordings

This paper develops a control algorithm that can autonomously position an electrode so as to find and then maintain an optimal extracellular recording position. The algorithm was developed and tested in a two-neuron computational model representative of the cells found in cerebral cortex. The algorithm is based on a stochastic optimization of a suitably defined signal quality metric and is shown capable of finding the optimal recording position along representative sampling directions, as well as maintaining the optimal signal quality in the face of modeled tissue movements. The application of the algorithm to acute neurophysiological recording experiments and its potential implications to chronic recording electrode arrays are discussed

Multimodal Multipart Learning for Action Recognition in Depth Videos

The articulated and complex nature of human actions makes the task of action recognition difficult. One approach to handle this complexity is dividing it to the kinetics of body parts and analyzing the actions based on these partial descriptors. We propose a joint sparse regression based learning method which utilizes the structured sparsity to model each action as a combination of multimodal features from a sparse set of body parts. To represent dynamics and appearance of parts, we employ a heterogeneous set of depth and skeleton based features. The proper structure of multimodal multipart features are formulated into the learning framework via the proposed hierarchical mixed norm, to regularize the structured features of each part and to apply sparsity between them, in favor of a group feature selection. Our experimental results expose the effectiveness of the proposed learning method in which it outperforms other methods in all three tested datasets while saturating one of them by achieving perfect accuracy

Automated routing and control of silicon photonic switch fabrics

Automatic reconfiguration and feedback controlled routing is demonstrated in an 8×8 silicon photonic switch fabric based on Mach-Zehnder interferometers. The use of non-invasive Contactless Integrated Photonic Probes (CLIPPs) enables real-time monitoring of the state of each switching element individually. Local monitoring provides direct information on the routing path, allowing an easy sequential tuning and feedback controlled stabilization of the individual switching elements, thus making the switch fabric robust against thermal crosstalk, even in the absence of a cooling system for the silicon chip. Up to 24 CLIPPs are interrogated by a multichannel integrated ASIC wire-bonded to the photonic chip. Optical routing is demonstrated on simultaneous WDM input signals that are labelled directly on-chip by suitable pilot tones without affecting the quality of the signals. Neither preliminary circuit calibration nor lookup tables are required, being the proposed control scheme inherently insensible to channels power fluctuations

Robust Design of Transmit Waveform and Receive Filter For Colocated MIMO Radar

We consider the problem of angle-robust joint transmit waveform and receive filter design for colocated Multiple-Input Multiple-Output (MIMO) radar, in the presence of signal-dependent interferences. The design problem is cast as a max-min optimization problem to maximize the worst-case output signal-to-interference-plus-noise-ratio (SINR) with respect to the unknown angle of the target of interest. Based on rank-one relaxation and semi-definite programming (SDP) representation of a nonnegative trigonometric polynomial, a cyclic optimization algorithm is proposed to tackle this problem. The effectiveness of the proposed method is illustrated via numerical examples.Comment: 6 pages, 13 figures, part of this work was submitted to IEEE Signal Processing Letters; (short introduction; typos corrected; revised statement in section III-B and IV; revised figure labels