33,012 research outputs found
Type-2 Fuzzy Control of a Bioreactor
Abstract—In this paper the control of a bioprocess using
an adaptive type-2 fuzzy logic controller is proposed.
The process is concerned with the aerobic alcoholic
fermentation for the growth of Saccharomyces Cerevisiae
a n d i s characterized by nonlinearity and parameter
uncertainty. Three type-2 fuzzy controllers heve been
developed and tested by simulation: a simple type-2
fuzzy logic controller with 49 rules; a type-2 fuzzyneuro-
predictive controller (T2FNPC); a t y p e -2 selftuning
fuzzy controller ( T2STFC). The T2FNPC
combines the capability of the type-2 fuzzy logic to
handle uncertainties, with the ability of predictive
control to predict future plant performance making use
of a neural network model of the non linear system. In
the T2STFC the output scaling factor is adjusted on-line
by fuzzy rules according to the current trend of the
controlled process. T h e advantage of the proposed
adaptive algorithms is to greatly decrease the number of
rules needed for the control reducing the computational
load and at same time assuring a robust control
A review of convex approaches for control, observation and safety of linear parameter varying and Takagi-Sugeno systems
This paper provides a review about the concept of convex systems based on Takagi-Sugeno, linear parameter varying (LPV) and quasi-LPV modeling. These paradigms are capable of hiding the nonlinearities by means of an equivalent description which uses a set of linear models interpolated by appropriately defined weighing functions. Convex systems have become very popular since they allow applying extended linear techniques based on linear matrix inequalities (LMIs) to complex nonlinear systems. This survey aims at providing the reader with a significant overview of the existing LMI-based techniques for convex systems in the fields of control, observation and safety. Firstly, a detailed review of stability, feedback, tracking and model predictive control (MPC) convex controllers is considered. Secondly, the problem of state estimation is addressed through the design of proportional, proportional-integral, unknown input and descriptor observers. Finally, safety of convex systems is discussed by describing popular techniques for fault diagnosis and fault tolerant control (FTC).Peer ReviewedPostprint (published version
Recommended from our members
Robust H∞ fuzzy output-feedback control with multiple probabilistic delays and multiple missing measurements
Copyright [2010] IEEE. This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of Brunel University's products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to [email protected].
By choosing to view this document, you agree to all provisions of the copyright laws protecting it.In this paper, the robust H∞-control problem is investigated for a class of uncertain discrete-time fuzzy systems with both multiple probabilistic delays and multiple missing measurements. A sequence of random variables, all of which are mutually independent but obey the Bernoulli distribution, is introduced to account for the probabilistic communication delays. The measurement-missing phenomenon occurs in a random way. The missing probability for each sensor satisfies a certain probabilistic distribution in the interval. Here, the attention is focused on the analysis and design of H∞ fuzzy output-feedback controllers such that the closed-loop Takagi-Sugeno (T-S) fuzzy-control system is exponentially stable in the mean square. The disturbance-rejection attenuation is constrained to a given level by means of the H∞-performance index. Intensive analysis is carried out to obtain sufficient conditions for the existence of admissible output feedback controllers, which ensures the exponential stability as well as the prescribed H∞ performance. The cone-complementarity-linearization procedure is employed to cast the controller-design problem into a sequential minimization one that is solved by the semi-definite program method. Simulation results are utilized to demonstrate the effectiveness of the proposed design technique in this paper.This work was supported in part by the Engineering and Physical Sciences Research Council, U.K., under Grant GR/S27658/01, in part by the Royal Society, U.K., in part by the National Natural Science Foundation of
China under Grant 60825303, in part by the National 973 Project of China under Grant 2009CB320600, in part by the Heilongjiang Outstanding Youth Science Fund of China under Grant JC200809, in part by the Youth Science Fund of Heilongjiang Province of China under Grant QC2009C63, and in part by the Alexander von Humboldt Foundation of Germany
Analysis, filtering, and control for Takagi-Sugeno fuzzy models in networked systems
Copyright © 2015 Sunjie Zhang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.The fuzzy logic theory has been proven to be effective in dealing with various nonlinear systems and has a great success in industry applications. Among different kinds of models for fuzzy systems, the so-called Takagi-Sugeno (T-S) fuzzy model has been quite popular due to its convenient and simple dynamic structure as well as its capability of approximating any smooth nonlinear function to any specified accuracy within any compact set. In terms of such a model, the performance analysis and the design of controllers and filters play important roles in the research of fuzzy systems. In this paper, we aim to survey some recent advances on the T-S fuzzy control and filtering problems with various network-induced phenomena. The network-induced phenomena under consideration mainly include communication delays, packet dropouts, signal quantization, and randomly occurring uncertainties (ROUs). With such network-induced phenomena, the developments on T-S fuzzy control and filtering issues are reviewed in detail. In addition, some latest results on this topic are highlighted. In the end, conclusions are drawn and some possible future research directions are pointed out.This work was supported in part by the National Natural Science Foundation of China under Grants 61134009, 61329301, 11301118 and 61174136, the Natural Science Foundation of Jiangsu Province of China under Grant BK20130017, the Fundamental Research Funds for the Central Universities of China under Grant CUSF-DH-D-2013061, the Royal Society of the U.K., and the Alexander von Humboldt Foundation of Germany
Fuzzy-model-based robust fault detection with stochastic mixed time-delays and successive packet dropouts
This is the Post-Print version of the Article. The official published version can be accessed from the link below - Copyright @ 2012 IEEEThis paper is concerned with the network-based robust fault detection problem for a class of uncertain discrete-time Takagi–Sugeno fuzzy systems with stochastic mixed time delays and successive packet dropouts. The mixed time delays comprise both the multiple discrete time delays and the infinite distributed delays. A sequence of stochastic variables is introduced to govern the random occurrences of the discrete time delays, distributed time delays, and successive packet dropouts, where all the stochastic variables are mutually independent but obey the Bernoulli distribution. The main purpose of this paper is to design a fuzzy fault detection filter such that the overall fault detection dynamics is exponentially stable in the mean square and, at the same time, the error between the residual signal and the fault signal is made as small as possible. Sufficient conditions are first established via intensive stochastic analysis for the existence of the desired fuzzy fault detection filters, and then, the corresponding solvability conditions for the desired filter gains are established. In addition, the optimal performance index for the addressed robust fuzzy fault detection problem is obtained by solving an auxiliary convex optimization problem. An illustrative example is provided to show the usefulness and effectiveness of the proposed design method.This work was supported in part by the National Natural Science Foundation of China under Grant 61028008, 60825303, 61004067,
National 973 Project under Grant 2009CB320600, the Key Laboratory of Integrated Automation for the Process Industry (Northeastern University), Ministry of Education, the Engineering and Physical
Sciences Research Council (EPSRC) of the U.K. under Grant GR/S27658/01, the Royal Society of the U.K., the University of Hong
Kong under Grant HKU/CRCG/200907176129 and the Alexander von Humboldt Foundation of Germany
H∞ fuzzy control for systems with repeated scalar nonlinearities and random packet losses
Copyright [2009] IEEE. This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of Brunel University's products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to [email protected]. By choosing to view this document, you agree to all provisions of the copyright laws protecting it.This paper is concerned with the H∞ fuzzy control problem for a class of systems with repeated scalar nonlinearities and random packet losses. A modified Takagi-Sugeno (T-S) fuzzy model is proposed in which the consequent parts are composed of a set of discrete-time state equations containing a repeated scalar nonlinearity. Such a model can describe some well-known nonlinear systems such as recurrent neural networks. The measurement transmission between the plant and controller is assumed to be imperfect and a stochastic variable satisfying the Bernoulli random binary distribution is utilized to represent the phenomenon of random packet losses. Attention is focused on the analysis and design of H∞ fuzzy controllers with the same repeated scalar nonlinearities such that the closed-loop T-S fuzzy control system is stochastically stable and preserves a guaranteed H∞ performance. Sufficient conditions are obtained for the existence of admissible controllers, and the cone complementarity linearization procedure is employed to cast the controller design problem into a sequential minimization one subject to linear matrix inequalities, which can be readily solved by using standard numerical software. Two examples are given to illustrate the effectiveness of the proposed design method
Fuzzy H-infinity output feedback control of nonlinear systems under sampled measurements
This paper studies the problem of designing an H∞ fuzzy feedback control for a class of nonlinear systems described by a continuous-time fuzzy system model under sampled output measurements. The premise variables of the fuzzy system model are allowed to be unavailable. We develop a technique for designing an H∞ fuzzy feedback control that guarantees the L2 gain from an exogenous input to a controlled output is less than or equal to a prescribed value. A design algorithm for constructing the H∞ fuzzy feedback controller is given
- …