9,953 research outputs found

    Zonotopic fault detection observer design for Takagi–Sugeno fuzzy systems

    Get PDF
    This paper considers zonotopic fault detection observer design in the finite-frequency domain for discrete-time Takagi–Sugeno fuzzy systems with unknown but bounded disturbances and measurement noise. We present a novel fault detection observer structure, which is more general than the commonly used Luenberger form. To make the generated residual sensitive to faults and robust against disturbances, we develop a finite-frequency fault detection observer based on generalised Kalman–Yakubovich–Popov lemma and P-radius criterion. The design conditions are expressed in terms of linear matrix inequalities. The major merit of the proposed method is that residual evaluation can be easily implemented via zonotopic approach. Numerical examples are conducted to demonstrate the proposed methodPeer ReviewedPostprint (author's final draft

    On design of robust fault detection filter in finite-frequency domain with regional pole assignment

    Get PDF
    This brief is concerned with the fault detection (FD) filter design problem for an uncertain linear discrete-time system in the finite-frequency domain with regional pole assignment. An optimized FD filter is designed such that: 1) the FD dynamics is quadratically D-stable; 2) the effect from the exogenous disturbance on the residual is attenuated with respect to a minimized H∞-norm; and 3) the sensitivity of the residual to the fault is enhanced by means of a maximized H--norm. With the aid of the generalized Kalman-Yakubovich-Popov lemma, the mixed H--/H∞ performance and the D-stability requirement are guaranteed by solving a convex optimization problem. An iterative algorithm for designing the desired FD filter is proposed by evaluating the threshold on the generated residual function. A simulation result is exploited to illustrate the effectiveness of the proposed design technique.This work was supported in part by the Deanship of Scientific Research (DSR) at King Abdulaziz University in Saudi Arabia under Grant 16-135- 35-HiCi, the National Natural Science Foundation of China under Grants 61134009 and 61203139, the Royal Society of the U.K., and the Alexander von Humboldt Foundation of Germany

    Mathematical control of complex systems

    Get PDF
    Copyright © 2013 ZidongWang et al.This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited

    A Markovian jump system approach for the estimation and adaptive diagnosis of decreased power generation in wind farms

    Get PDF
    In this study, a Markovian jump model of the power generation system of a wind turbine is proposed and the authors present a closed-loop model-based observer to estimate the faults related to energy losses. The observer is designed through an H∞-based optimisation problem that optimally fixes the trade-off between the observer fault sensitivity and robustness. The fault estimates are then used in data-based decision mechanisms for achieving fault detection and isolation. The performance of the strategy is then ameliorated in a wind farm (WF) level scheme that uses a bank of the aforementioned observers and decision mechanisms. Finally, the proposed approach is tested using a well-known benchmark in the context of WF fault diagnosis

    A review on analysis and synthesis of nonlinear stochastic systems with randomly occurring incomplete information

    Get PDF
    Copyright q 2012 Hongli Dong et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.In the context of systems and control, incomplete information refers to a dynamical system in which knowledge about the system states is limited due to the difficulties in modeling complexity in a quantitative way. The well-known types of incomplete information include parameter uncertainties and norm-bounded nonlinearities. Recently, in response to the development of network technologies, the phenomenon of randomly occurring incomplete information has become more and more prevalent. Such a phenomenon typically appears in a networked environment. Examples include, but are not limited to, randomly occurring uncertainties, randomly occurring nonlinearities, randomly occurring saturation, randomly missing measurements and randomly occurring quantization. Randomly occurring incomplete information, if not properly handled, would seriously deteriorate the performance of a control system. In this paper, we aim to survey some recent advances on the analysis and synthesis problems for nonlinear stochastic systems with randomly occurring incomplete information. The developments of the filtering, control and fault detection problems are systematically reviewed. Latest results on analysis and synthesis of nonlinear stochastic systems are discussed in great detail. In addition, various distributed filtering technologies over sensor networks are highlighted. Finally, some concluding remarks are given and some possible future research directions are pointed out. © 2012 Hongli Dong et al.This work was supported in part by the National Natural Science Foundation of China under Grants 61273156, 61134009, 61273201, 61021002, and 61004067, the Engineering and Physical Sciences Research Council (EPSRC) of the UK under Grant GR/S27658/01, the Royal Society of the UK, the National Science Foundation of the USA under Grant No. HRD-1137732, and the Alexander von Humboldt Foundation of German

    A Tractable Fault Detection and Isolation Approach for Nonlinear Systems with Probabilistic Performance

    Full text link
    This article presents a novel perspective along with a scalable methodology to design a fault detection and isolation (FDI) filter for high dimensional nonlinear systems. Previous approaches on FDI problems are either confined to linear systems or they are only applicable to low dimensional dynamics with specific structures. In contrast, shifting attention from the system dynamics to the disturbance inputs, we propose a relaxed design perspective to train a linear residual generator given some statistical information about the disturbance patterns. That is, we propose an optimization-based approach to robustify the filter with respect to finitely many signatures of the nonlinearity. We then invoke recent results in randomized optimization to provide theoretical guarantees for the performance of the proposed filer. Finally, motivated by a cyber-physical attack emanating from the vulnerabilities introduced by the interaction between IT infrastructure and power system, we deploy the developed theoretical results to detect such an intrusion before the functionality of the power system is disrupted

    A survey on fractional order control techniques for unmanned aerial and ground vehicles

    Get PDF
    In recent years, numerous applications of science and engineering for modeling and control of unmanned aerial vehicles (UAVs) and unmanned ground vehicles (UGVs) systems based on fractional calculus have been realized. The extra fractional order derivative terms allow to optimizing the performance of the systems. The review presented in this paper focuses on the control problems of the UAVs and UGVs that have been addressed by the fractional order techniques over the last decade

    Networked gain-scheduled fault diagnosis under control input dropouts without data delivery acknowledgement

    Get PDF
    This paper investigates the fault diagnosis problem for discrete‐time networked control systems under dropouts in both control and measurement channel with no delivery acknowledgment. We propose to use a proportional integral observer‐based fault diagnoser collocated with the controller. The observer estimates the faults and computes a residual signal whose comparison with a threshold alarms the fault appearance. We employ the expected value of the arriving control input for the open‐loop estimation and the measurement reception scenario for the correction with a jump observer. The jumping gains are scheduled in real time with rational functions depending on a statistic of the difference between the control command being applied in the plant and the one being used in the observer. We design the observer, the residual, and the threshold to maximize the sensitivity under faults while guaranteeing some minimum detectable faults under a predefined false alarm rate. Exploiting sum‐of‐squares decomposition techniques, the design procedure becomes an optimization problem over polynomials

    Fault detection and isolation for linear dynamic systems

    No full text
    As modern control systems and engineering processes become increasingly more complex and integrated, the consequences of system failures and faults can be disastrous environmentally and economically. This thesis considers the fault detection and isolation (FDI) problem for linear time-invariant (LTI) systems subject to faults, disturbances and model uncertainties. Firstly, a novel on-line approach to the robust FDI problem for linear discrete-time systems is proposed by using input/output measurement analysis over a finite estimation horizon. Upper and lower bounds on the fault signal are computed at each sampling instant so that a fault is detected and isolated when its upper bound is smaller than zero or its lower bound is larger than zero. Moreover, a subsequent-state-estimation technique, together with an estimation horizon update procedure are given to allow the on-line FDI process to be repeated in a moving horizon scheme. Secondly, an optimal solution to theH−/H∞ fault detection (FD) problem is given for linear time-invariant systems subject to faults, disturbances and model uncertainties by using an observer-based approach. A new performance index is developed to capture both fault detection and disturbance rejection requirements which is particularly suitable for handling model uncertainties. A class of optimal solutions to the problem is then given in the form of simple linear matrix inequalities (LMI) with two degrees of freedom. By appropriately choosing these degrees of freedom, fault isolation can also be achieved. Thirdly, in order to improve the FD performance and remove restrictive rank assumptions, routinely made in the literature, observer-based FD problems are investigated at a single frequency and over a finite frequency range, respectively. An optimal solution is derived such that, at a given frequency, the static observer generates a residual signal which minimizes the sensitivity of the residual to disturbances while maintaining a minimum level of sensitivity to faults. Then, an initial investigation is carried out for the FD problem over a finite frequency range. A solution is derived in the form of an LMI optimization by using the generalized KYP lemma followed by a linearization procedure. Conditions under which this solution is optimal are also derived. Fully worked out numerical examples, mostly from the literature, are given to illustrate the effectiveness of all the proposed schemes

    Advances in state estimation, diagnosis and control of complex systems

    Get PDF
    This dissertation intends to provide theoretical and practical contributions on estimation, diagnosis and control of complex systems, especially in the mathematical form of descriptor systems. The research is motivated by real applications, such as water networks and power systems, which require a control system to provide a proper management able to take into account their specific features and operating limits in presence of uncertainties related to their operation and failures from component malfunctions. Such a control system is expected to provide an optimal operation to obtain efficient and reliable performance. State estimation is an essential tool, which can be used not only for fault diagnosis but also for the controller design. To achieve a satisfactory robust performance, set theory is chosen to build a general framework for descriptor systems subject to uncertainties. Under certain assumptions, these uncertainties are propagated and bounded by deterministic sets that can be explicitly characterized at each iteration step. Moreover, set-invariance characterizations for descriptor systems are also of interest to describe the steady performance, which can also be used for active mode detection. For the controller design for complex systems, new developments of economic model predictive control (EMPC) are studied taking into account the case of underlying periodic behaviors. The EMPC controller is designed to be recursively feasible even with sudden changes in the economic cost function and the closed-loop convergence is guaranteed. Besides, a robust technique is plugged into the EMPC controller design to maintain these closed-loop properties in presence of uncertainties. Engineering applications modeled as descriptor systems are presented to illustrate these control strategies. From the real applications, some additional difficulties are solved, such as using a two-layer control strategy to avoid binary variables in real-time optimizations and using nonlinear constraint relaxation to deal with nonlinear algebraic equations in the descriptor model. Furthermore, the fault-tolerant capability is also included in the controller design for descriptor systems by means of the designed virtual actuator and virtual sensor together with an observer-based delayed controller.Esta tesis propone contribuciones de carácter teórico y aplicado para la estimación del estado, el diagnóstico y el control óptimo de sistemas dinámicos complejos en particular, para los sistemas descriptores, incluyendo la capacidad de tolerancia a fallos. La motivación de la tesis proviene de aplicaciones reales, como redes de agua y sistemas de energía, cuya naturaleza crítica requiere necesariamente un sistema de control para una gestión capaz de tener en cuenta sus características específicas y límites operativos en presencia de incertidumbres relacionadas con su funcionamiento, así como fallos de funcionamiento de los componentes. El objetivo es conseguir controladores que mejoren tanto la eficiencia como la fiabilidad de dichos sistemas. La estimación del estado es una herramienta esencial que puede usarse no solo para el diagnóstico de fallos sino también para el diseño del control. Con este fin, se ha decidido utilizar metodologías intervalares, o basadas en conjuntos, para construir un marco general para los sistemas de descriptores sujetos a incertidumbres desconocidas pero acotadas. Estas incertidumbres se propagan y delimitan mediante conjuntos que se pueden caracterizar explícitamente en cada instante. Por otra parte, también se proponen caracterizaciones basadas en conjuntos invariantes para sistemas de descriptores que permiten describir comportamientos estacionarios y resultan útiles para la detección de modos activos. Se estudian también nuevos desarrollos del control predictivo económico basado en modelos (EMPC) para tener en cuenta posibles comportamientos periódicos en la variación de parámetros o en las perturbaciones que afectan a estos sistemas. Además, se demuestra que el control EMPC propuesto garantiza la factibilidad recursiva, incluso frente a cambios repentinos en la función de coste económico y se garantiza la convergencia en lazo cerrado. Por otra parte, se utilizan técnicas de control robusto pata garantizar que las estrategias de control predictivo económico mantengan las prestaciones en lazo cerrado, incluso en presencia de incertidumbre. Los desarrollos de la tesis se ilustran con casos de estudio realistas. Para algunas de aplicaciones reales, se resuelven dificultades adicionales, como el uso de una estrategia de control de dos niveles para evitar incluir variables binarias en la optimización y el uso de la relajación de restricciones no lineales para tratar las ecuaciones algebraicas no lineales en el modelo descriptor en las redes de agua. Finalmente, se incluye también una contribución al diseño de estrategias de control con tolerancia a fallos para sistemas descriptores
    corecore