Design of of model-based controllers via parametric programming

Imperial Users onl

On the controllability of fermentation systems

This thesis concerns the controllability of fermentation processes. Fermentation processes are often described by unstructured process models. A control system can be used to reduce the effect of the uncertainties and disturbances. A process is called controllable if a control system satisfying suitably defined control objectives can be found. Controllability measures based on linear process models are identified. The idealised control objective for perfect control allows fast evaluation of the controllability measures. These measures are applied to compare different designs of a continuous fermentation process by identifying the controllability properties of the process design. The operational mode of fed batch fermentations is inherently dynamic. General control system design methods are not readily applicable to such systems. This work presents an approach for the design of robust controllers suitable for these processes. The control objective is to satisfy a set of robustness constraints for a given set of model uncertainties and disturbances. The optimal operation and design problems are combined into a single optimal control problem. The controller design is integrated into the process design problem formulation. In this way the control system and the process are designed simultaneously. Different problem formulations are investigated. The proposed approach is demonstrated on complex fermentation models. The resulting operating strategies are controllable with respect to the aims of control

Damping of electromechanical oscillations using power system stabilizers

Includes bibliographical references.This thesis deals with the damping of electromechanical oscillations using Power System Stabilizers (PSS). The thesis focuses on three problems associated with the damping of these oscillations, namely the determination of the optimal locations of the PSS, the determination of the best control structure of the PSS and the design of robust PSS. We develop two new methods for determining the optimal locations of the PSS. These two methods are based on Total Modified Coupling Factors (TMC) and optimization by Simulated Annealing (SA). The TMC is a measure of the damping influence of each machine pair on several power system modes. The TMC incorporates the effect of the performance and the type of excitation system of the generator. The method based on TMC is tested on a nine-bus benchmark network. In the method based on SA, we formulate the PSS placement problem as a discrete nonlinear optimization problem. The objective function corresponds to the damping of the electromechanical modes of the system. In this method, the placement is performed simultaneously for all PSS. Using SA, we obtain a placement scheme which guarantees that the undesired poles can be controlled with finite control energy. As a result of the optimization formulation, the method based on SA is computationally more intensive than the method based on TMC. We demonstrate the method based on SA on two networks namely, a seven-bus network and a 35-bus equivalent of the Eskom network. The problem of determining the control structure for damping of the electromechanical oscillations is composed of three aspects namely, the type of feedback, the type of signal and the type of control

Efficient Control Approaches for Guaranteed Frequency Performance in Power Systems

Due to high penetration of renewable energy, converter-interfaced sources are increasing in power systems and degrading the grid frequency response. Synthetic inertia emulation and guaranteed primary frequency response is a challenging task. Still, there is high potential for application of highly controllable converter-interfaced devices to help performance. Renewable energy sources and demand side smart devices also need to be equipped with innovative frequency control approaches that contribute to frequency regulation operations. First, the wind turbine generator is chosen to represent an example of a converter- interfaced source. An augmented system frequency response model is derived, including the system frequency response model and a reduced-order model of the wind turbine generator representing the supportive active power due to supplementary inputs. An output feedback observer-based control is designed to provide guaranteed frequency performance. System performance is analyzed for different short circuit ratio scenarios where a lower bound to guarantee the performance is obtained. Second, the load side control for frequency regulation with its challenges is introduced. 5G technology and its potential application in smart grids are analyzed. The effect of communication delays and packet losses on inertia emulation are investigated to show the need of using improved communication infrastructure. Third, a robust delay compensation for primary frequency control using fast demand response is proposed. Possible system structured uncertainties and communication delays are considered to limit frequency variations using the proposed control approach. An uncertain governor dead-band model is introduced to capture frequency response characteristics. Guaranteed inertial response is achieved and compared with a PI-based Smith predictor controller to show the effectiveness of the proposed method. Fourth, set theoretic methods for safety verification to provide guaranteed frequency response are introduced. The Barrier certificate approach using a linear programming relaxation by Handelman’s representation is proposed with its application to power systems. Finally, the Handelman’s based barrier certificate approach for adequate frequency performance is studied. The computational algorithm is provided for the proposed method and validated using power system benchmark case studies with a discussion on a safety supervisory control (SSC)

Identification and Optimal Linear Tracking Control of ODU Autonomous Surface Vehicle

Autonomous surface vehicles (ASVs) are being used for diverse applications of civilian and military importance such as: military reconnaissance, sea patrol, bathymetry, environmental monitoring, and oceanographic research. Currently, these unmanned tasks can accurately be accomplished by ASVs due to recent advancements in computing, sensing, and actuating systems. For this reason, researchers around the world have been taking interest in ASVs for the last decade. Due to the ever-changing surface of water and stochastic disturbances such as wind and tidal currents that greatly affect the path-following ability of ASVs, identification of an accurate model of inherently nonlinear and stochastic ASV system and then designing a viable control using that model for its planar motion is a challenging task. For planar motion control of ASV, the work done by researchers is mainly based on the theoretical modeling in which the nonlinear hydrodynamic terms are determined, while some work suggested the nonlinear control techniques and adhered to simulation results. Also, the majority of work is related to the mono- or twin-hull ASVs with a single rudder. The ODU-ASV used in present research is a twin-hull design having two DC trolling motors for path-following motion. A novel approach of time-domain open-loop observer Kalman filter identifications (OKID) and state-feedback optimal linear tracking control of ODU-ASV is presented, in which a linear state-space model of ODU-ASV is obtained from the measured input and output data. The accuracy of the identified model for ODU-ASV is confirmed by validation results of model output data reconstruction and benchmark residual analysis. Then, the OKID-identified model of the ODU-ASV is utilized to design the proposed controller for its planar motion such that a predefined cost function is minimized using state and control weighting matrices, which are determined by a multi-objective optimization genetic algorithm technique. The validation results of proposed controller using step inputs as well as sinusoidal and arc-like trajectories are presented to confirm the controller performance. Moreover, real-time water-trials were performed and their results confirm the validity of proposed controller in path-following motion of ODU-ASV

Power network and smart grids analysis from a graph theoretic perspective

The growing size and complexity of power systems has given raise to the use of complex network theory in their modelling, analysis, and synthesis. Though most of the previous studies in this area have focused on distributed control through well established protocols like synchronization and consensus, recently, a few fundamental concepts from graph theory have also been applied, for example in symmetry-based cluster synchronization. Among the existing notions of graph theory, graph symmetry is the focus of this proposal. However, there are other development around some concepts from complex network theory such as graph clustering in the study. In spite of the widespread applications of symmetry concepts in many real world complex networks, one can rarely find an article exploiting the symmetry in power systems. In addition, no study has been conducted in analysing controllability and robustness for a power network employing graph symmetry. It has been verified that graph symmetry promotes robustness but impedes controllability. A largely absent work, even in other fields outside power systems, is the simultaneous investigation of the symmetry effect on controllability and robustness. The thesis can be divided into two section. The first section, including Chapters 2-3, establishes the major theoretical development around the applications of graph symmetry in power networks. A few important topics in power systems and smart grids such as controllability and robustness are addressed using the symmetry concept. These topics are directed toward solving specific problems in complex power networks. The controllability analysis will lead to new algorithms elaborating current controllability benchmarks such as the maximum matching and the minimum dominant set. The resulting algorithms will optimize the number of required driver nodes indicated as FACTS devices in power networks. The second topic, robustness, will be tackled by the symmetry analysis of the network to investigate three aspects of network robustness: robustness of controllability, disturbance decoupling, and fault tolerance against failure in a network element. In the second section, including Chapters 4-8, in addition to theoretical development, a few novel applications are proposed for the theoretical development proposed in both sections one and two. In Chapter 4, an application for the proposed approaches is introduced and developed. The placement of flexible AC transmission systems (FACTS) is investigated where the cybersecurity of the associated data exchange under the wide area power networks is also considered. A new notion of security, i.e. moderated-k-symmetry, is introduced to leverage on the symmetry characteristics of the network to obscure the network data from the adversary perspective. In chapters 5-8, the use of graph theory, and in particular, graph symmetry and centrality, are adapted for the complex network of charging stations. In Chapter 5, the placement and sizing of charging stations (CSs) of the network of electric vehicles are addressed by proposing a novel complex network model of the charging stations. The problems of placement and sizing are then reformulated in a control framework and the impact of symmetry on the number and locations of charging stations is also investigated. These results are developed in Chapters 6-7 to robust placement and sizing of charging stations for the Tesla network of Sydney where the problem of extending the capacity having a set of pre-existing CSs are addressed. The role of centrality in placement of CSs is investigated in Chapter 8. Finally, concluding remarks and future works are presented in Chapter 9