Adaptive-smith predictor for controlling an automotive electronic throttle over network

The paper presents a control strategy for an automotive electronic throttle, a device used to regulate the power produced by spark-ignition engines. Controlling the electronic throttle body is a difficult task because the throttle accounts strong nonlinearities. The difficulty increases when the control works through communication networks subject to random delay. In this paper, we revisit the Smith-predictor control, and show how to adapt it for controlling the electronic throttle body over a delay-driven network. Experiments were carried out in a laboratory, and the corresponding data indicate the benefits of our approach for applications.Peer ReviewedPostprint (published version

Robust H2 static output feedback to control an autmomotive throttle valve

The paper presents a control strategy for an automotive electronic throttle body, a device largely used into vehicles to increase the efficiency of the combustion engines. The synthesis of the proposed controller is based on a linear matrix inequality (LMI) formulation, which allows us to deal with uncertainties on the measurements of the position of the throttle valve. The LMI approach generates a suboptimal solution for the robust H-2 static output feedback control problem, and the corresponding suboptimal control gain was evaluated in practice to control the valve position of the throttle. The usefulness of the approach has been verified not only by numerical simulations but also by real experiments taken in a laboratory prototype.Postprint (published version

State-dependent Kalman filters for robust engine control

Vehicle emissions variations impose significant challenges to the automotive industry. In these simulation studies, nonlinear estimation techniques based on state-dependent and extended Kalman filtering are developed for spark ignition engines to enhance robustness of the feedforward fuel controllers to changes in nominal system parameters and measurement errors. A model-based approach is used to derive the optimal filters. Numerical simulations indicate the superiority of estimation-based approaches to enhance robustness of in-cylinder air estimation which directly contributes to the precision of engine exhaust air-fuel ratio and, consequently the consistency of the tailpipe emissions. The results obtained are for an aggressive driving profile and are presented and discusse

A novel genetic programming approach to the design of engine control systems for the voltage stabilisation of hybrid electric vehicle generator outputs

This paper describes a Genetic Programming based automatic design methodology applied to the maintenance of a stable generated electrical output from a series-hybrid vehi- cle generator set. The generator set comprises a 3-phase AC generator whose output is subsequently rectified to DC.The engine/generator combination receives its control input via an electronically actuated throttle, whose control integration is made more complex due to the significant system time delay. This time delay problem is usually addressed by model predictive design methods, which add computational complexity and rely as a necessity on accurate system and delay models. In order to eliminate this reliance, and achieve stable operation with disturbance rejection, a controller is designed via a Genetic Programming framework implemented directly in Matlab, and particularly, Simulink. the principal objective is to obtain a relatively simple controller for the time-delay system which doesn’t rely on computationally expensive structures, yet retains inherent disturabance rejection properties. A methodology is presented to automatically design control systems directly upon the block libraries available in Simulink to automatically evolve robust control structures

Design and development of auxiliary components for a new two-stroke, stratified-charge, lean-burn gasoline engine

A unique stepped-piston engine was developed by a group of research engineers at Universiti Teknologi Malaysia (UTM), from 2003 to 2005. The development work undertaken by them engulfs design, prototyping and evaluation over a predetermined period of time which was iterative and challenging in nature. The main objective of the program is to demonstrate local R&D capabilities on small engine work that is able to produce mobile powerhouse of comparable output, having low-fuel consumption and acceptable emission than its crankcase counterpart of similar displacement. A two-stroke engine work was selected as it posses a number of technological challenges, increase in its thermal efficiency, which upon successful undertakings will be useful in assisting the group in future powertrain undertakings in UTM. In its carbureted version, the single-cylinder aircooled engine incorporates a three-port transfer system and a dedicated crankcase breather. These features will enable the prototype to have high induction efficiency and to behave very much a two-stroke engine but equipped with a four-stroke crankcase lubrication system. After a series of analytical work the engine was subjected to a series of laboratory trials. It was also tested on a small watercraft platform with promising indication of its flexibility of use as a prime mover in mobile platform. In an effort to further enhance its technology features, the researchers have also embarked on the development of an add-on auxiliary system. The system comprises of an engine control unit (ECU), a directinjector unit, a dedicated lubricant dispenser unit and an embedded common rail fuel unit. This support system was incorporated onto the engine to demonstrate the finer points of environmental-friendly and fuel economy features. The outcome of this complete package is described in the report, covering the methodology and the final characteristics of the mobile power plant

Automotive Powertrain Control — A Survey

This paper surveys recent and historical publications on automotive powertrain control. Control-oriented models of gasoline and diesel engines and their aftertreatment systems are reviewed, and challenging control problems for conventional engines, hybrid vehicles and fuel cell powertrains are discussed. Fundamentals are revisited and advancements are highlighted. A comprehensive list of references is provided.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/72023/1/j.1934-6093.2006.tb00275.x.pd

THROTTLE-BY-WIRE (TBW) FOR RETROFIT CONVERSION OF HYBRID ELECTRIC VEHICLE (HEV) USING NI COMPACT RIO & LABVIEW

Conventional throttle body in a vehicle is controlled mechanically via cable and this project propose a method for replacing the conventional throttle body with an electronic throttle body (ETB) and fine-tune the system in order to implement electronic throttle-by-wire (TBW) for retrofit conversion of hybrid electric vehicle (HEV) to enable diligent control of throttle valve by using National Instrument’s compact Reconfigurable Input Output (cRIO) hardware and Laboratory Instrumentation Engineering Workbench (LabVIEW) graphical user interface (GUI)

Development of an electronic governor system for a small spark ignition engine

The use of electronic controls on engines has been widespread and has now reached the small utility engine. The evolution from carburetion to electronic fuel injection has presented opportunity to implement additional controls with the intent to improve engine control and performance. In this study, an electronic governor system is developed for use on a small twin cylinder utility engine. This system is to replace an existing mechanical governor system, and it should have the potential as a production based solution that integrates with an existing fuel injection system. It must improve the speed droop characteristics over the current mechanical system and should not carry a large cost increase to the engine --Abstract, page iii

Low-Cost Throttle-By-Wire-System Architecture For Two-Wheeler Vehicles

This paper investigates the performance of a low-cost Throttle-by-Wire-System (TbWS) for two-wheeler applications. Its consisting of an AMR throttle position sensor and a position controlled stepper motor driven throttle valve actuator. The decentralized throttle position sensor is operating contactless and acquires redundant data. Throttle valve actuation is realized through a position controlled stepper motor, sensing its position feedback by Hall effect. Using a PI-controller the stepper motors position is precisely set. Sensor and actuator units are transceiving data by a CAN bus. Furthermore, failsafe functions, plausibility checks, calibration algorithms and energy saving modes have been implemented. Both modules have been evaluated within a Hardware-in-the-Loop test environment in terms of reliability and measurement/positioning performance before the TbWS was integrated in a Peugeot Kisbee 50 4T (Euro 5/injected). Finally, the sensor unit comes with a measurement deviation of less then 0.16% whereas the actuator unit can approach throttle valve positions with a deviation of less then 0.37%. The actuators settling time does not exceed 0.13s while stable, step-loss free and noiseless operation