480 research outputs found

    Using zero padding for robust channel Estimation in SEFDM systems

    Get PDF

    Experimental Demonstration of Spectrally Efficient Frequency Division Multiplexing Transmissions at E-Band

    Get PDF
    This paper presents the design and the experimental demonstration of transmission of spectrally efficient frequency division multiplexing (SEFDM) signals, using a single 5-GHz channel, from 81 to 86 CHz in the E-hand frequency allocation. A purpose-built E-band SEFDM experimental demonstrator, consisting of transmitter and receiver GaAs microwave integrated circuits, along with a complete chain of digital signal processing is explained. Solutions are proposed to solve the channel and phase offset estimation and equalization issues, which arise from the well-known intercarrier interference between the SEFDM signal subcarriers. This paper shows the highest transmission rate of 12 Gb/s over a bandwidth varying between 2.67 to 4 CHz depending on the compression level of the SEFDM signals, which results in a spectral efficiency improvement by up to 50%, compared to the conventional orthogonal frequency division multiplexing modulation format

    Transmission Experiment of Bandwidth Compressed Carrier Aggregation in a Realistic Fading Channel

    Get PDF
    In this paper, an experimental testbed is designed to evaluate the performance of a bandwidth compressed multicarrier technique termed spectrally efficient frequency division multiplexing (SEFDM) in a carrier aggregation (CA) scenario1. Unlike orthogonal frequency division multiplexing (OFDM), SEFDM is a non-orthogonal waveform which, relative to OFDM, packs more sub-carriers in a given bandwidth, thereby improving spectral efficiency. CA is a long term evolution-advanced (LTE-Advanced) featured technique that offers a higher throughput by aggregating multiple legacy radio bands. Considering the scarcity of radio spectrum, SEFDM signals can be utilized to enhance CA performance. The combination of the two techniques results in a larger number of aggregated component carriers (CCs) and therefore increased data rate in a given bandwidth with no additional spectral allocation. It is experimentally shown that CA-SEFDM can aggregate up to 7 CCs in a limited bandwidth while CA-OFDM can only put 5 CCs in the same bandwidth. In this work, LTE-like framed CA-SEFDM signals are generated and delivered through a realistic LTE channel. A complete experimental setup is described together with error performance and effective spectral efficiency comparisons. Experimental results show that the measured BER performance for CA-SEFDM is very close to CA-OFDM and the effective spectral efficiency of CA-SEFDM can be substantially higher than that of CA-OFDM

    A Joint Waveform and Precoding Design for Non-orthogonal Multicarrier Signals

    Get PDF
    In the spectrally efficient frequency division multiplexing (SEFDM) non-orthogonal multicarrier signal, higher spectral efficiency can be achieved at the expense of self-created inter carrier interference (ICI). The effective interference, which is contributed by all sub-carriers, has to be minimized and this results in a receiver of significant complexity. In order to mitigate the interference and simplify the receiver design, in this work, a precoding technique, based on eigenvalue decomposition of the sub-carrier correlation matrix, is utilised. Briefly, the technique is based on modifying the data sent on individual sub-carriers according to the signal quality of each, which is based on the sub-carrier to interference ratio (ScIR) of such sub-carrier as estimated from eigenvalue decomposition. A full system model is presented in this paper and simulations show that the precoding of SEFDM results in either better bit error rate (BER) performance compared to that of an orthogonal frequency division multiplexing (OFDM) system of the same spectral efficiency or in higher effective bit rate relative to an OFDM system with the same BER performance. Modelling is done in simple Gaussian noise channels and in a static frequency selective channel and for different modulation formats. Results show that for the same bandwidth a 128QAM precoded SEFDM system outperforms a 16QAM OFDM one by offering 75% bit rate increase. Furthermore, Turbo coding assisted BER performance comparisons are investigated in this work. Using 64QAM modulated symbols, the precoded SEFDM outperforms the typical OFDM by several dBs

    Spectrally and Energy Efficient Wireless Communications: Signal and System Design, Mathematical Modelling and Optimisation

    Get PDF
    This thesis explores engineering studies and designs aiming to meeting the requirements of enhancing capacity and energy efficiency for next generation communication networks. Challenges of spectrum scarcity and energy constraints are addressed and new technologies are proposed, analytically investigated and examined. The thesis commences by reviewing studies on spectrally and energy-efficient techniques, with a special focus on non-orthogonal multicarrier modulation, particularly spectrally efficient frequency division multiplexing (SEFDM). Rigorous theoretical and mathematical modelling studies of SEFDM are presented. Moreover, to address the potential application of SEFDM under the 5th generation new radio (5G NR) heterogeneous numerologies, simulation-based studies of SEFDM coexisting with orthogonal frequency division multiplexing (OFDM) are conducted. New signal formats and corresponding transceiver structure are designed, using a Hilbert transform filter pair for shaping pulses. Detailed modelling and numerical investigations show that the proposed signal doubles spectral efficiency without performance degradation, with studies of two signal formats; uncoded narrow-band internet of things (NB-IoT) signals and unframed turbo coded multi-carrier signals. The thesis also considers using constellation shaping techniques and SEFDM for capacity enhancement in 5G system. Probabilistic shaping for SEFDM is proposed and modelled to show both transmission energy reduction and bandwidth saving with advantageous flexibility for data rate adaptation. Expanding on constellation shaping to improve performance further, a comparative study of multidimensional modulation techniques is carried out. A four-dimensional signal, with better noise immunity is investigated, for which metaheuristic optimisation algorithms are studied, developed, and conducted to optimise bit-to-symbol mapping. Finally, a specially designed machine learning technique for signal and system design in physical layer communications is proposed, utilising the application of autoencoder-based end-to-end learning. Multidimensional signal modulation with multidimensional constellation shaping is proposed and optimised by using machine learning techniques, demonstrating significant improvement in spectral and energy efficiencies

    Experimental SEFDM Pipelined Iterative Detection Architecture with Improved Throughput

    Get PDF
    In spectrally efficient frequency division multiplexing (SEFDM), the separation between subcarriers is reduced below the Nyquist criteria, enhancing bandwidth utilisation in comparison to orthogonal frequency division multiplexing (OFDM). This leads to self-induced inter-carrier interference (ICI) in the SEFDM signal, which requires more sophisticated detectors to retrieve the transmitted data. In previous work, iterative detectors (IDs) have been used to recover the SEFDM signal after processing a certain number of iterations, however, the sequential iterative process increases the processing time with the number of iterations, leading to throughput reduction. In this work, ID pipelining is designed and implemented in software defined radio (SDR) to reduce the overall system detection latency and improve the throughput. Thus, symbols are allocated into parallel IDs that have no waiting time as they are received. Our experimental findings show that throughput will improve linearly with the number of the paralleled ID elements, however, hardware complexity also increases linearly with the number of ID elements

    Coexistence of orthogonal and nonorthogonal multicarrier signals in beyond 5G scenarios

    Get PDF
    Optimum operation of future mobile communication systems requires more flexible signalling mechanisms for radio access. For flexible heterogeneous signalling implementation, this work discusses coexistence scenarios of orthogonal and nonorthogonal multicarrier signals, specifically considering orthogonal frequency division multiplexing (OFDM) and spectrally efficient FDM (SEFDM) signals. Three main scenarios of the coexisting signalling are addressed under 5G new radio (5G NR) numerology with varying subcarrier spacing. Using numerical simulations, this work reports performance results of systems operating under the studied coexistence scenarios assuming uncoded and coded signals. Results reveal that systems employing SEFDM and OFDM result in some BER degradation when uncoded signals are used and also show that when applying low-density parity-check (LDPC) to the transmitted signals, the coexistence effects are mitigated and the block error rate (BLER) for both orthogonal and non-orthogonal signals suffers only slight degradation

    Experimental Validation of Zero Padding in SEFDM Systems Using Over-the-Air Transmission

    Get PDF
    Non-orthogonal spectrally efficient frequency division multiplexing (SEFDM) saves bandwidth by compressing the frequency spacing between the subcarriers. This is at the cost of introducing inter-carrier interference (ICI) between the subcarriers. This self-created ICI compounded by the signal degradation caused during wireless propagation in multipath environments, complicates the task of channel estimation and equalisation. Recent studies suggest that combining zero padding (ZP) with SEFDM signals can simplify the challenge of channel estimation and equalisation in the frequency-domain. In this work, we validate experimentally the new ZP scheme through over-the-air transmission of radio frequency (RF) signals. Experimental results prove that using ZP in SEFDM enhances the channel estimation and equalisation accuracy, in comparison to conventional cyclic prefix (CP)-SEFDM. In addition, it is shown that ZP-SEFDM offers robustness against timing offsets

    mm-Wave Data Transmission and Measurement Techniques: A Holistic Approach

    Get PDF
    The ever-increasing demand on data services places unprecedented technical requirements on networks capacity. With wireless systems having significant roles in broadband delivery, innovative approaches to their development are imperative. By leveraging new spectral resources available at millimeter-wave (mm-wave) frequencies, future systems can utilize new signal structures and new system architectures in order to achieve long-term sustainable solutions.This thesis proposes the holistic development of efficient and cost-effective techniques and systems which make high-speed data transmission at mm-wave feasible. In this paradigm, system designs, signal processing, and measurement techniques work toward a single goal; to achieve satisfactory system level key performance indicators (KPIs). Two intimately-related objectives are simultaneously addressed: the realization of efficient mm-wave data transmission and the development of measurement techniques to enable and assist the design and evaluation of mm-wave circuits.The standard approach to increase spectral efficiency is to increase the modulation order at the cost of higher transmission power. To improve upon this, a signal structure called spectrally efficient frequency division multiplexing (SEFDM) is utilized. SEFDM adds an additional dimension of continuously tunable spectral efficiency enhancement. Two new variants of SEFDM are implemented and experimentally demonstrated, where both variants are shown to outperform standard signals.A low-cost low-complexity mm-wave transmitter architecture is proposed and experimentally demonstrated. A simple phase retarder predistorter and a frequency multiplier are utilized to successfully generate spectrally efficient mm-wave signals while simultaneously mitigating various issues found in conventional mm-wave systems.A measurement technique to characterize circuits and components under antenna array mutual coupling effects is proposed and demonstrated. With minimal setup requirement, the technique effectively and conveniently maps prescribed transmission scenarios to the measurement environment and offers evaluations of the components in terms of relevant KPIs in addition to conventional metrics.Finally, a technique to estimate transmission and reflection coefficients is proposed and demonstrated. In one variant, the technique enables the coefficients to be estimated using wideband modulated signals, suitable for implementation in measurements performed under real usage scenarios. In another variant, the technique enhances the precision of noisy S-parameter measurements, suitable for characterizations of wideband mm-wave components

    Spectrally Efficient FDM over Satellite Systems with Advanced Interference Cancellation

    Get PDF
    For high data rates satellite systems, where multiple carriers are frequency division multiplexed with a slight overlap, the overall spectral efficiency is limited. This work applies highly overlapped carriers for satellite broadcast and broadband scenarios to achieve higher spectral efficiency. Spectrally efficient frequency division multiplexing (SEFDM) compresses subcarrier spacing to increase the spectral efficiency at the expense of orthogonality violation. SEFDM systems performance degrades compared to orthogonal signals, unless efficient interference cancellation is used. Turbo equalisation with interference cancellation is implemented to improve receiver performance for variable coding, compression and modulation/constellation proposals that may be applied in satellite communications settings. Such parameters may be set to satisfy pre-defined spectral efficiency values for a given quality index (QI) or associated application. Assuming LDPC coded data, the work proposes two approaches to receiver design; a simple matched filter approach and an approach utilising an iterative interference cancellation structure specially designed for SEFDM. Mathematical models and simulations studies are presented indicating promising gains to be achieved for SEFDM transmission with advanced transceiver architectures at the cost of increased complexity at the receiver
    • …
    corecore