An Energy Efficient Knee Locking Mechanism for a Dynamically Walking Robot

In this work, we present the design and the implementation of an innovative knee locking mechanism for a dynamically walking robot. The mechanism consists of a four-bar linkage that realizes a mechanical singularity for locking the knee when the leg is in the extended position. Once extended, the knee remains locked without energy consumption, while unlocking it only costs a small amount of energy. Tests showed that the robot walks robustly and that the energy consumption of the new system is low

Push recovery with stepping strategy based on time-projection control

In this paper, we present a simple control framework for on-line push recovery with dynamic stepping properties. Due to relatively heavy legs in our robot, we need to take swing dynamics into account and thus use a linear model called 3LP which is composed of three pendulums to simulate swing and torso dynamics. Based on 3LP equations, we formulate discrete LQR controllers and use a particular time-projection method to adjust the next footstep location on-line during the motion continuously. This adjustment, which is found based on both pelvis and swing foot tracking errors, naturally takes the swing dynamics into account. Suggested adjustments are added to the Cartesian 3LP gaits and converted to joint-space trajectories through inverse kinematics. Fixed and adaptive foot lift strategies also ensure enough ground clearance in perturbed walking conditions. The proposed structure is robust, yet uses very simple state estimation and basic position tracking. We rely on the physical series elastic actuators to absorb impacts while introducing simple laws to compensate their tracking bias. Extensive experiments demonstrate the functionality of different control blocks and prove the effectiveness of time-projection in extreme push recovery scenarios. We also show self-produced and emergent walking gaits when the robot is subject to continuous dragging forces. These gaits feature dynamic walking robustness due to relatively soft springs in the ankles and avoiding any Zero Moment Point (ZMP) control in our proposed architecture.Comment: 20 pages journal pape

Modeling, Simulation and Control of the Walking of Biped Robotic Devices, Part II: Rectilinear Walking

This is the second part of a three-part paper. It extends to the free walking results of a previous work on postural equilibrium of a lower limb exoskeleton for rehabilitation exercises. A classical approach has been adopted to design gait (zero moment point (ZMP), linearized inverted pendulum theory, inverse kinematics obtained through the pseudo-inverse of Jacobian matrices). While several ideas exploited here can be found in other papers of the literature, e.g., whole-body coordination, our contribution is the simplicity of the whole control approach that originates logically from a common root. (1) The approximation of the unilateral foot/feet-ground contacts with non-holonomic constraints leads naturally to a modeling and control design that implements a two-phase switching system. The approach is facilitated by Kane’s method and tools as described in Part I. (2) The Jacobian matrix is used to transfer from the Cartesian to the joint space a greater number of variables for redundancy than the degrees of freedom (DOF). We call it the extended Jacobian matrix. Redundancy and the prioritization of postural tasks is approached with weighted least squares. The singularity of the kinematics when knees are fully extended is solved very simply by fake knee joint velocities. (3) Compliance with the contact and accommodation of the swing foot on an uneven ground, when switching from single to double stance, and the transfer of weight from one foot to the other in double stance are approached by exploiting force/torque expressions returned from the constraints. (4) In the center of gravity (COG)/ZMP loop for equilibrium, an extended estimator, based on the linearized inverted pendulum, is adopted to cope with external force disturbances and unmodeled dynamics. Part II treats rectilinear walking, while Part III discusses turning while walking

3LP: a linear 3D-walking model including torso and swing dynamics

In this paper, we present a new model of biped locomotion which is composed of three linear pendulums (one per leg and one for the whole upper body) to describe stance, swing and torso dynamics. In addition to double support, this model has different actuation possibilities in the swing hip and stance ankle which could be widely used to produce different walking gaits. Without the need for numerical time-integration, closed-form solutions help finding periodic gaits which could be simply scaled in certain dimensions to modulate the motion online. Thanks to linearity properties, the proposed model can provide a computationally fast platform for model predictive controllers to predict the future and consider meaningful inequality constraints to ensure feasibility of the motion. Such property is coming from describing dynamics with joint torques directly and therefore, reflecting hardware limitations more precisely, even in the very abstract high level template space. The proposed model produces human-like torque and ground reaction force profiles and thus, compared to point-mass models, it is more promising for precise control of humanoid robots. Despite being linear and lacking many other features of human walking like CoM excursion, knee flexion and ground clearance, we show that the proposed model can predict one of the main optimality trends in human walking, i.e. nonlinear speed-frequency relationship. In this paper, we mainly focus on describing the model and its capabilities, comparing it with human data and calculating optimal human gait variables. Setting up control problems and advanced biomechanical analysis still remain for future works.Comment: Journal paper under revie

Analytic and Learned Footstep Control for Robust Bipedal Walking

Bipedal walking is a complex, balance-critical whole-body motion with inherently unstable inverted pendulum-like dynamics. Strong disturbances must be quickly responded to by altering the walking motion and placing the next step in the right place at the right time. Unfortunately, the high number of degrees of freedom of the humanoid body makes the fast computation of well-placed steps a particularly challenging task. Sensor noise, imprecise actuation, and latency in the sensomotoric feedback loop impose further challenges when controlling real hardware. This dissertation addresses these challenges and describes a method of generating a robust walking motion for bipedal robots. Fast modification of footstep placement and timing allows agile control of the walking velocity and the absorption of strong disturbances. In a divide and conquer manner, the concepts of motion and balance are solved separately from each other, and consolidated in a way that a low-dimensional balance controller controls the timing and the footstep locations of a high-dimensional motion generator. Central pattern generated oscillatory motion signals are used for the synthesis of an open-loop stable walk on flat ground, which lacks the ability to respond to disturbances due to the absence of feedback. The Central Pattern Generator exhibits a low-dimensional parameter set to influence the timing and the landing coordinates of the swing foot. For balance control, a simple inverted pendulum-based physical model is used to represent the principal dynamics of walking. The model is robust to disturbances in a way that it returns to an ideal trajectory from a wide range of initial conditions by employing a combination of Zero Moment Point control, step timing, and foot placement strategies. The simulation of the model and its controller output are computed efficiently in closed form, supporting high-frequency balance control at the cost of an insignificant computational load. Additionally, the sagittal step size produced by the controller can be trained online during walking with a novel, gradient descent-based machine learning method. While the analytic controller forms the core of reliable walking, the trained sagittal step size complements the analytic controller in order to improve the overall walking performance. The balanced whole-body walking motion arises by using the footstep coordinates and the step timing predicted by the low-dimensional model as control input for the Central Pattern Generator. Real robot experiments are presented as evidence for disturbance-resistant, omnidirectional gait control, with arguably the strongest push-recovery capabilities to date

人間を模擬した知覚系を持つ2足ヒューマノイドロボットの自己位置推定機能に対する歩行動作の影響に関する研究

早大学位記番号:新8279早稲田大

Gait-Behavior Optimization Considering Arm Swing and Toe Mechanisms for Biped Robot on Rough Road

芝浦工業大学2019年

Motion Planning and Control for the Locomotion of Humanoid Robot

This thesis aims to contribute on the motion planning and control problem of the locomotion of humanoid robots. For the motion planning, various methods were proposed in different levels of model dependence. First, a model free approach was proposed which utilizes linear regression to estimate the relationship between foot placement and moving velocity. The data-based feature makes it quite robust to handle modeling error and external disturbance. As a generic control philosophy, it can be applied to various robots with different gaits. To reduce the risk of collecting experimental data of model-free method, based on the simplified linear inverted pendulum model, the classic planning method of model predictive control was explored to optimize CoM trajectory with predefined foot placements or optimize them two together with respect to the ZMP constraint. Along with elaborately designed re-planning algorithm and sparse discretization of trajectories, it is fast enough to run in real time and robust enough to resist external disturbance. Thereafter, nonlinear models are utilized for motion planning by performing forward simulation iteratively following the multiple shooting method. A walking pattern is predefined to fix most of the degrees of the robot, and only one decision variable, foot placement, is left in one motion plane and therefore able to be solved in milliseconds which is sufficient to run in real time. In order to track the planned trajectories and prevent the robot from falling over, diverse control strategies were proposed according to the types of joint actuators. CoM stabilizer was designed for the robots with position-controlled joints while quasi-static Cartesian impedance control and optimization-based full body torque control were implemented for the robots with torque-controlled joints. Various scenarios were set up to demonstrate the feasibility and robustness of the proposed approaches, like walking on uneven terrain, walking with narrow feet or straight leg, push recovery and so on