Rate-Splitting for Max-Min Fair Multigroup Multicast Beamforming in Overloaded Systems

In this paper, we consider the problem of achieving max-min fairness amongst multiple co-channel multicast groups through transmit beamforming. We explicitly focus on overloaded scenarios in which the number of transmitting antennas is insufficient to neutralize all inter-group interference. Such scenarios are becoming increasingly relevant in the light of growing low-latency content delivery demands, and also commonly appear in multibeam satellite systems. We derive performance limits of classical beamforming strategies using DoF analysis unveiling their limitations; for example, rates saturate in overloaded scenarios due to inter-group interference. To tackle interference, we propose a strategy based on degraded beamforming and successive interference cancellation. While the degraded strategy resolves the rate-saturation issue, this comes at a price of sacrificing all spatial multiplexing gains. This motivates the development of a unifying strategy that combines the benefits of the two previous strategies. We propose a beamforming strategy based on rate-splitting (RS) which divides the messages intended to each group into a degraded part and a designated part, and transmits a superposition of both degraded and designated beamformed streams. The superiority of the proposed strategy is demonstrated through DoF analysis. Finally, we solve the RS beamforming design problem and demonstrate significant performance gains through simulations

A Survey on Delay-Aware Resource Control for Wireless Systems --- Large Deviation Theory, Stochastic Lyapunov Drift and Distributed Stochastic Learning

In this tutorial paper, a comprehensive survey is given on several major systematic approaches in dealing with delay-aware control problems, namely the equivalent rate constraint approach, the Lyapunov stability drift approach and the approximate Markov Decision Process (MDP) approach using stochastic learning. These approaches essentially embrace most of the existing literature regarding delay-aware resource control in wireless systems. They have their relative pros and cons in terms of performance, complexity and implementation issues. For each of the approaches, the problem setup, the general solution and the design methodology are discussed. Applications of these approaches to delay-aware resource allocation are illustrated with examples in single-hop wireless networks. Furthermore, recent results regarding delay-aware multi-hop routing designs in general multi-hop networks are elaborated. Finally, the delay performance of the various approaches are compared through simulations using an example of the uplink OFDMA systems.Comment: 58 pages, 8 figures; IEEE Transactions on Information Theory, 201

Rate-Splitting for Max-Min Fair Multigroup Multicast Beamforming in Overloaded Systems

In this paper, we consider the problem of achieving max-min fairness amongst multiple co-channel multicast groups through transmit beamforming. We explicitly focus on overloaded scenarios in which the number of transmitting antennas is insufficient to neutralize all inter-group interference. Such scenarios are becoming increasingly relevant in the light of growing low-latency content delivery demands, and also commonly appear in multibeam satellite systems. We derive performance limits of classical beamforming strategies using DoF analysis unveiling their limitations; for example, rates saturate in overloaded scenarios due to inter-group interference. To tackle interference, we propose a strategy based on degraded beamforming and successive interference cancellation. While the degraded strategy resolves the rate-saturation issue, this comes at a price of sacrificing all spatial multiplexing gains. This motivates the development of a unifying strategy that combines the benefits of the two previous strategies. We propose a beamforming strategy based on rate-splitting (RS) which divides the messages intended to each group into a degraded part and a designated part, and transmits a superposition of both degraded and designated beamformed streams. The superiority of the proposed strategy is demonstrated through DoF analysis. Finally, we solve the RS beamforming design problem and demonstrate significant performance gains through simulations

Cross-layer design and optimization of medium access control protocols for wlans

This thesis provides a contribution to the field of Medium Access Control (MAC) layer protocol design for wireless networks by proposing and evaluating mechanisms that enhance different aspects of the network performance. These enhancements are achieved through the exchange of information between different layers of the traditional protocol stack, a concept known as Cross-Layer (CL) design. The main thesis contributions are divided into two parts. The first part of the thesis introduces a novel MAC layer protocol named Distributed Queuing Collision Avoidance (DQCA). DQCA behaves as a reservation scheme that ensures collision-free data transmissions at the majority of the time and switches automatically to an Aloha-like random access mechanism when the traffic load is low. DQCA can be enriched by more advanced scheduling algorithms based on a CL dialogue between the MAC and other protocol layers, to provide higher throughput and Quality of Service (QoS) guarantees. The second part of the thesis explores a different challenge in MAC layer design, related to the ability of multiple antenna systems to offer point-to-multipoint communications. Some modifications to the recently approved IEEE 802.11n standard are proposed in order to handle simultaneous multiuser downlink transmissions. A number of multiuser MAC schemes that handle channel access and scheduling issues and provide mechanisms for feedback acquisition have been presented and evaluated. The obtained performance enhancements have been demonstrated with the help of both theoretical analysis and simulation obtained results

Adaptive radio resource management schemes for the downlink of the OFDMA-based wireless communication systems

Includes bibliographical references.Due to its superior characteristics that make it suitable for high speed mobile wireless systems OFDMA has been adopted by next generation broadband wireless standards including Worldwide Interoperability for Microwave Access (WiMAX) and Long Term Evolution – Advanced (LTE-A). Intelligent and adaptive Radio Resource Management (RRM) schemes are a fundamental tool in the design of wireless systems to be able to fully and efficiently utilize the available scarce resources and be able to meet the user data rates and QoS requirements. Previous works were only concerned with maximizing system efficiency and thus used opportunistic algorithms that allocate resources to users with the best opportunities to optimize system capacity. Thus, only those users with good channel conditions were considered for resource allocation and users in bad channel conditions were left out to starve of resources. The main objective of our study is to design adaptive radio resource allocation (RRA) algorithms that distribute the scarce resources more fairly among network users while efficiently using the resources to maximize system throughput. Four scheduling algorithms have been formulated and analysed based on fairness, throughputs and delay. This was done for users demanding different services and QoS requirements. Two of the scheduling algorithms, Maximum Sum Rate (MSR) and Round Robin (RR) are used respectively, as references to analyze throughput and fairness among network users. The other two algorithms are Proportional Fair Scheduling (PFS) and Margin Adaptive Scheduling Scheme (MASS)

Power Management in Multiuser Adaptive Modulation Transmission under QoS Requirements

A transmitter power management mechanism is presented in this paper where Multiple-Input Multiple-Output (MIMO) Multiuser Random Beamforming with Adaptive Modulation strategy is performed by the system. The objective of the proposed mechanism is quality of service (QoS) satisfaction for the scheduled user. The QoS is represented by the application demanded data rate and symbol error rate. The power outage problem is considered and a practical method to minimize the outage probability is proposed. The obtained results are encouraging as they show a great decrease in the system power budget. The multiuser system capability is also exploited to achieve larger power saving values and smaller probability of power outage by scheduling the user with the best channel characteristics at each time instant. The amount of saved power and the power outage probability are both presented through closed-form expressions. These theoretical results are compared to computer simulations, which show very good agreement in performance

Design Challenges for the Implementation of Smart Homes

Home automation for many years had faced challenges that limit its spreading around the world. These challenges caused by the high cost of Own such a home, inflexibility system (cannot be monitored outside the home) and issues to achieve optimal security. Our main objective is to design and implement a smart home model that is simple, affordable to the users. The proposed system provide flexibility to monitor the home, using the reliable cellular network. The user will be able what is inside the home when he /she is away from home. In addition to that, our model overcome the issue of the security by providing different sensors that detects smoke, gas, leakage of water and incases of burglary. Moreover, a camera will be available in the home to give a full view for the user when he/she is outside the home. The user will be informed by an application on his/she phone incase if there is a fire, water leakage and if someone break into the house. This will give the user a chance to take an action if such cases happened. Furthermore, the user can monitor the lighting system of the home, by giving the user a chance to turn the lights on and off remotely

Multibeam Joint Processing in Satellite Communications

Cooperative Satellite Communications (SatComs) involve multi-antenna satellites enabled for the joint transmission and reception of signals. This joint processing of baseband signals is realized amongst the distinct but interconnected antennas. Advanced signal processing techniques –namely precoding and Multiuser Detection (MUD)– are herein examined in the multibeam satellite context. The aim of this thesis is to establish the prominence of such methods in the next generation of broadband satellite networks. To this end, two approaches are followed. On one hand, the performance of the well established and theoretically concrete MUD is analysed over the satellite environments. On the other, optimal signal processing designs are developed and evaluated for the forward link. In more detail, the present dissertation begins by introducing the topic of multibeam joint processing. Thus, the most significant practical constraints that hinder the application of advanced interference mitigation techniques in satellite networks are identified and discussed. Prior to presenting the contributions of this work, the multi-antenna joint processing problem is formulated using the generic Multiuser (MU) Multiple InputMultiple Output (MIMO) baseband signal model. This model is also extended to apply in the SatComs context. A detailed presentation of the related work, starting from a generic signal processing perspective and then focusing on the SatComs field, is then given. With this review, the main open research topics are identified. Following the comprehensive literature review, the first contribution of this work, is presented. This involves the performance evaluation of MUD in the Return Link (RL) of multiuser multibeam SatComs systems. Novel, analytical expressions are derived to describe the information theoretic channel capacity as well as the performance of practical receivers over realistic satellite channels. Based on the derived formulas, significant insights for the design of the RL of next generation cooperative satellite systems are provided. In the remaining of this thesis, the focus is set on the Forward Link (FL) of multibeam SatComs, where precoding, combined with aggressive frequency reuse configurations, are proposed to enhance the offered throughput. In this context, the alleviation of practical constraints imposed by the satellite channel is the main research challenge. Focusing on the rigid framing structure of the legacy SatCom standards, the fundamental frame-based precoding problem is examined. Based on the necessity to serve multiple users by a single transmission, the connection of the frame-based precoding and the fundamental signal processing problem of physical layer multigroup multicasting is established. In this framework and to account for the power limitations imposed by a dedicated High Power Amplifier (HPA) per transmit element, a novel solution for multigroup multicasting under Per Anntenna Constraints (PACs) is derived. Therefore, the gains offered by multigroup multicasting in frame-based systems are quantified over an accurate simulation setting. Finally, advanced multicast and interference aware scheduling algorithms are proposed to glean significant gains in the rich multiuser satellite environment. The thesis concludes with the main research findings and the identification of new research challenges, which will pave the way for the deployment of cooperative multibeam satellite systems