Position Estimation of Robotic Mobile Nodes in Wireless Testbed using GENI

We present a low complexity experimental RF-based indoor localization system based on the collection and processing of WiFi RSSI signals and processing using a RSS-based multi-lateration algorithm to determine a robotic mobile node's location. We use a real indoor wireless testbed called w-iLab.t that is deployed in Zwijnaarde, Ghent, Belgium. One of the unique attributes of this testbed is that it provides tools and interfaces using Global Environment for Network Innovations (GENI) project to easily create reproducible wireless network experiments in a controlled environment. We provide a low complexity algorithm to estimate the location of the mobile robots in the indoor environment. In addition, we provide a comparison between some of our collected measurements with their corresponding location estimation and the actual robot location. The comparison shows an accuracy between 0.65 and 5 meters.Comment: (c) 2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other work

Recurrent Neural Networks For Accurate RSSI Indoor Localization

This paper proposes recurrent neuron networks (RNNs) for a fingerprinting indoor localization using WiFi. Instead of locating user's position one at a time as in the cases of conventional algorithms, our RNN solution aims at trajectory positioning and takes into account the relation among the received signal strength indicator (RSSI) measurements in a trajectory. Furthermore, a weighted average filter is proposed for both input RSSI data and sequential output locations to enhance the accuracy among the temporal fluctuations of RSSI. The results using different types of RNN including vanilla RNN, long short-term memory (LSTM), gated recurrent unit (GRU) and bidirectional LSTM (BiLSTM) are presented. On-site experiments demonstrate that the proposed structure achieves an average localization error of $0.75$ m with $80\%$ of the errors under $1$ m, which outperforms the conventional KNN algorithms and probabilistic algorithms by approximately $30\%$ under the same test environment.Comment: Received signal strength indicator (RSSI), WiFi indoor localization, recurrent neuron network (RNN), long shortterm memory (LSTM), fingerprint-based localizatio

Environmental Sensing by Wearable Device for Indoor Activity and Location Estimation

We present results from a set of experiments in this pilot study to investigate the causal influence of user activity on various environmental parameters monitored by occupant carried multi-purpose sensors. Hypotheses with respect to each type of measurements are verified, including temperature, humidity, and light level collected during eight typical activities: sitting in lab / cubicle, indoor walking / running, resting after physical activity, climbing stairs, taking elevators, and outdoor walking. Our main contribution is the development of features for activity and location recognition based on environmental measurements, which exploit location- and activity-specific characteristics and capture the trends resulted from the underlying physiological process. The features are statistically shown to have good separability and are also information-rich. Fusing environmental sensing together with acceleration is shown to achieve classification accuracy as high as 99.13%. For building applications, this study motivates a sensor fusion paradigm for learning individualized activity, location, and environmental preferences for energy management and user comfort.Comment: submitted to the 40th Annual Conference of the IEEE Industrial Electronics Society (IECON

2D localization with WiFi passive radar and device-based techniques: an analysis of target measurements accuracy

The aim of the work is to investigate the performance of two localization techniques based on WiFi signals: the WiFi-based passive radar and a device-based technique that exploits the measurement of angle of arrival (AoA) and time difference of arrival. This paper focuses specifically on the accuracy of the AoA measurements. As expected, the results show that for both techniques the AoA accuracy depends on the signal-to-noise ratio also in terms of the number of exploited received signal samples. For the passive radar, very accurate estimates are obtained; however, loss of detections can appear only when the rate of the Access Point packets is strongly reduced. In contrast, device-based estimates accuracy is lower, since it suffers of the limited number of emitted packets when the device is not uploading data. However, it allows localization also of stationary targets, which is impossible for the passive radar. This suggests that the two techniques are complementary and their fusion could provide a sensibly increase performance with respect to the individual techniques

A generic communication architecture for end to end mobility management in the Internet

The proliferation of laptops, cellular phones, and other mobile computing platforms connected to the Internet has triggered numerous research works into mobile networking. The increasingly dense set of wireless access networks that can be potentially accessed by mobile users open the door to an era of pervasive computing. However, the puzzle of wireless access networks that tends to become the natural access networks to the Internet pushes legacy“wireoriented” communication architectures to their limit. Indeed, there is a critical gap between the increasingly used stream centric multimedia applications and the incapacity of legacy communication stacks to insure the continuity of these multimedia sessions for mobile users. This paper proposes a generic communication architecture (i.e. not dedicated to a specific protocol or technology) that aims to fill the gap between the application layer continuity needs and the discontinuity of the communication service inherent to the physical layer of wireless mobile networks. This paper introduces an end to end communication architecture that preserves efficiently session continuity in the context of mobile and wireless networks. This architecture is mainly based on end to end mechanisms that could be integrated into a new generation reconfigurable transport protocol. The proposed contribution efficiently satisfies mobility requirements such as efficient location management, fast handover, and continuous connection support

A Robust Zero-Calibration RF-based Localization System for Realistic Environments

Due to the noisy indoor radio propagation channel, Radio Frequency (RF)-based location determination systems usually require a tedious calibration phase to construct an RF fingerprint of the area of interest. This fingerprint varies with the used mobile device, changes of the transmit power of smart access points (APs), and dynamic changes in the environment; requiring re-calibration of the area of interest; which reduces the technology ease of use. In this paper, we present IncVoronoi: a novel system that can provide zero-calibration accurate RF-based indoor localization that works in realistic environments. The basic idea is that the relative relation between the received signal strength from two APs at a certain location reflects the relative distance from this location to the respective APs. Building on this, IncVoronoi incrementally reduces the user ambiguity region based on refining the Voronoi tessellation of the area of interest. IncVoronoi also includes a number of modules to efficiently run in realtime as well as to handle practical deployment issues including the noisy wireless environment, obstacles in the environment, heterogeneous devices hardware, and smart APs. We have deployed IncVoronoi on different Android phones using the iBeacons technology in a university campus. Evaluation of IncVoronoi with a side-by-side comparison with traditional fingerprinting techniques shows that it can achieve a consistent median accuracy of 2.8m under different scenarios with a low beacon density of one beacon every 44m2. Compared to fingerprinting techniques, whose accuracy degrades by at least 156%, this accuracy comes with no training overhead and is robust to the different user devices, different transmit powers, and over temporal changes in the environment. This highlights the promise of IncVoronoi as a next generation indoor localization system.Comment: 9 pages, 13 figures, published in SECON 201