Robust fault detection for networked systems with communication delay and data missing

n this paper, the robust fault detection problem is investigated for a class of discrete-time networked systems with unknown input and multiple state delays. A novel measurement model is utilized to represent both the random measurement delays and the stochastic data missing phenomenon, which typically result from the limited capacity of the communication networks. The network status is assumed to vary in a Markovian fashion and its transition probability matrix is uncertain but resides in a known convex set of a polytopic type. The main purpose of this paper is to design a robust fault detection filter such that, for all unknown inputs, possible parameter uncertainties and incomplete measurements, the error between the residual signal and the fault signal is made as small as possible. By casting the addressed robust fault detection problem into an auxiliary robust H∞ filtering problem of a certain Markovian jumping system, a sufficient condition for the existence of the desired robust fault detection filter is established in terms of linear matrix inequalities. A numerical example is provided to illustrate the effectiveness and applicability of the proposed technique

Intelligent failure-tolerant control

An overview of failure-tolerant control is presented, beginning with robust control, progressing through parallel and analytical redundancy, and ending with rule-based systems and artificial neural networks. By design or implementation, failure-tolerant control systems are 'intelligent' systems. All failure-tolerant systems require some degrees of robustness to protect against catastrophic failure; failure tolerance often can be improved by adaptivity in decision-making and control, as well as by redundancy in measurement and actuation. Reliability, maintainability, and survivability can be enhanced by failure tolerance, although each objective poses different goals for control system design. Artificial intelligence concepts are helpful for integrating and codifying failure-tolerant control systems, not as alternatives but as adjuncts to conventional design methods

Diffuse retro-reflective imaging for improved mosquito tracking around human baited bednets

Robust imaging techniques for tracking insects have been essential tools in numerous laboratory and field studies on pests, beneficial insects and model systems. Recent innovations in optical imaging systems and associated signal processing have enabled detailed characterisation of nocturnal mosquito behaviour around bednets and improvements in bednet design, a global essential for protecting populations against malaria. Nonetheless, there remain challenges around ease of use for large scale in situ recordings and extracting data reliably in the critical areas of the bednet where the optical signal is attenuated. Here we introduce a retro-reflective screen at the back of the measurement volume, which can simultaneously provide diffuse illumination, and remove optical alignment issues whilst requiring only one-sided access to the measurement space. The illumination becomes significantly more uniform, although, noise removal algorithms are needed to reduce the effects of shot noise particularly across low intensity bednet regions. By systematically introducing mosquitoes in front and behind the bednet in lab experiments we are able to demonstrate robust tracking in these challenging areas. Overall, the retro-reflective imaging setup delivers mosquito segmentation rates in excess of 90% compared to less than 70% with back-lit systems

Robust observer design under measurement noise

We prove new results on robust observer design for systems with noisy measurement and bounded trajectories. A state observer is designed by dominating the incrementally homogeneous nonlinearities of the observation error system with its linear approximation, while gain adaptation and incremental observability guarantee an asymptotic upper bound for the estimation error depending on the limsup of the norm of the measuremen noise. The gain adaptation is implemented as the output of a stable filter using the squared norm of the measured output estimation error and the mismatch between each estimate and its saturated value

Zonotopic fault detection observer design for Takagi–Sugeno fuzzy systems

This paper considers zonotopic fault detection observer design in the finite-frequency domain for discrete-time Takagi–Sugeno fuzzy systems with unknown but bounded disturbances and measurement noise. We present a novel fault detection observer structure, which is more general than the commonly used Luenberger form. To make the generated residual sensitive to faults and robust against disturbances, we develop a finite-frequency fault detection observer based on generalised Kalman–Yakubovich–Popov lemma and P-radius criterion. The design conditions are expressed in terms of linear matrix inequalities. The major merit of the proposed method is that residual evaluation can be easily implemented via zonotopic approach. Numerical examples are conducted to demonstrate the proposed methodPeer ReviewedPostprint (author's final draft

Active Disturbance Rejection Based Robust Trajectory Tracking Controller Design in State Space

This paper proposes a new Active Disturbance Rejection based robust trajectory tracking controller design method in state space. It can compensate not only matched but also mismatched disturbances. Robust state and control input references are generated in terms of a fictitious design variable, namely differentially flat output, and the estimations of disturbances by using Differential Flatness and Disturbance Observer. Two different robust controller design techniques are proposed by using Brunovsky canonical form and polynomial matrix form approaches. The robust position control problem of a two mass-spring-damper system is studied to verify the proposed robust controllers.Comment: Accepted by ASME Journal of Journal of Dynamic Systems, Measurement, and Control in 201

Robust observer design under measurement noise with gain adaptation and saturated estimates

We use incremental homogeneity, gain adaptation and incremental observability for proving new results on robust observer design for systems with noisy measurement and bounded trajectories. A state observer is designed by dominating the incrementally homogeneous nonlinearities of the observation error system with its linear approximation, while gain adaptation and incremental observability guarantee an asymptotic upper bound for the estimation error depending on the limsup of the norm of the measurement noise. A characteristic and innovative feature of this observer is the mixed low/high-gain structure in combination with saturated state estimates and dynamically tuned gains and saturation levels. The gain adaptation is implemented as the output of a stable filter using the squared norm of the measured output estimation error and the mismatch between each estimate and its saturated value

Global Exponential Sampled-Data Observers for Nonlinear Systems with Delayed Measurements

This paper presents new results concerning the observer design for wide classes of nonlinear systems with both sampled and delayed measurements. By using a small gain approach we provide sufficient conditions, which involve both the delay and the sampling period, ensuring exponential convergence of the observer system error. The proposed observer is robust with respect to measurement errors and perturbations of the sampling schedule. Moreover, new results on the robust global exponential state predictor design problem are provided, for wide classes of nonlinear systems.Comment: 17 pages, submitted for possible publication to Systems and Control Letter

Measures of reconfigurability and its key characteristics in intelligent manufacturing systems

\In recent years, the fields of reconfigurable manufacturing systems, holonic manufacturing systems, and multi-agent systems have made technological advances to support the ready reconfiguration of automated manufacturing systems. While these technological advances have demonstrated robust operation and been qualitatively successful in achieving reconfigurability, limited effort has been devoted to the measurement of reconfigurability in the resultant systems. Hence, it is not clear (1) to which degree these designs have achieved their intended level of reconfigurability, (2) which systems are indeed quantitatively more reconfigurable and (3) how these designs may overcome their design limitations to achieve greater reconfigurability in subsequent design iterations. Recently, a reconfigurability measurement process based upon axiomatic design knowledge base and the design structure matrix has been developed. Together, they provide quantitative measures of reconfiguration potential and ease. This paper now builds upon these works to provide a set of composite reconfigurability measures. Among these are measures for the key characteristics of reconfigurability: integrability, convertibility, and customization, which have driven the qualitative and intuitive design of these technological advances. These measures are then demonstrated on an illustrative example followed by a discussion of how they adhere to requirements for reconfigurability measurement in automated and intelligent manufacturing systems