Brachiating power line inspection robot: controller design and implementation

The prevalence of electrical transmission networks has led to an increase in productivity and prosperity. In 2014, estimates showed that the global electric power transmission network consisted of 5.5 million circuit kilometres (Ckm) of high-voltage transmission lines with a combined capacity of 17 million mega-volt ampere. The vastness of the global transmission grid presents a significant problem for infrastructure maintenance. The high maintenance costs, coupled with challenging terrain, provide an opportunity for autonomous inspection robots. The Brachiating Power Line Inspection Robot (BPLIR) with wheels [73] is a transmission line inspection robot. The BPLIR is the focus of this research and this dissertation tackles the problem of state estimation, adaptive trajectory generation and robust control for the BPLIR. A kinematics-based Kalman Filter state estimator was designed and implemented to determine the full system state. Instrumentation used for measurement consisted of 2 Inertial Measurement Units (IMUs). The advantages of utilising IMUs is that they are less susceptible to drift, have no moving parts and are not prone to misalignment errors. The use of IMU's in the design meant that absolute angles (link angles measured with respect to earth) could be estimated, enabling the BPLIR to navigate inclined slopes. Quantitative Feedback Control theory was employed to address the issue of parameter uncertainty during operation. The operating environment of the BPLIR requires it to be robust to environmental factors such as wind disturbance and uncertainty in joint friction over time. The resulting robust control system was able to compensate for uncertain system parameters and reject disturbances in simulation. An online trajectory generator (OTG), inspired by Raibert-style reverse-time symmetry[10], fed into the control system to drive the end effector to the power line by employing brachiation. The OTG produced two trajectories; one of which was reverse time symmetrical and; another which minimised the perpendicular distance between the end gripper and the power line. Linear interpolation between the two trajectories ensured a smooth bump-less trajectory for the BPLIR to follow

Recent Advances in Robust Control

Robust control has been a topic of active research in the last three decades culminating in H_2/H_\infty and \mu design methods followed by research on parametric robustness, initially motivated by Kharitonov's theorem, the extension to non-linear time delay systems, and other more recent methods. The two volumes of Recent Advances in Robust Control give a selective overview of recent theoretical developments and present selected application examples. The volumes comprise 39 contributions covering various theoretical aspects as well as different application areas. The first volume covers selected problems in the theory of robust control and its application to robotic and electromechanical systems. The second volume is dedicated to special topics in robust control and problem specific solutions. Recent Advances in Robust Control will be a valuable reference for those interested in the recent theoretical advances and for researchers working in the broad field of robotics and mechatronics

Performance Comparison of Several Control Algorithms for Tracking Control of Pantograph Mechanism

A sort of parallel manipulator known as a pantograph robot mechanism was created primarily for industrial requests that required high precision and satisfied speed. While tracking a chosen trajectory profile requires a powerful controller. Because it has four active robot links and one robot passive link in place of just two links like the open chain does, it can carry more loads than the open chain robot mechanism while maintaining accuracy and stability. The calculated model for a closed chain pantograph robot mechanism presented in this paper takes into account the boundary conditions. For the purpose of simulating the dynamics of the pantograph robot mechanism, an entire MATLAB Simulink has been created. The related Simscape model had been created to verify the pantograph mathematical model that had been provided. Five alternative tracking controllers were also created and improved using the Flower Pollination (FP) algorithm. The PID controller, which is used in many engineering applications, is the first control. An enriched Fractional Order PID (FOPID) controller is the second control. The third control considers an improved Nonlinear conventional PID (NLPID) controller, and the parameters for this controller were likewise determined using (FP) optimization using the useful objective function. Model Reference Adaptive Control (MRAC) with PID Compensator is the fourth control. The Fuzzy PD+I Control is the last and final controller. A comparison of the different control methods was completed. A rectangular trajectory was chosen as the end effector of the pantograph robot\u27s position reference because it displays performance during sharp edges and provides a more accurate study. The proposed controllers were used for this task to analyse the performance. The outcomes demonstrate that the Fuzzy PD+I control outperforms the PID, FOPID, NLPID, and MRAC with PID Compensator controllers in terms of performance. In the case of the Fuzzy PD+I control, the angles end effector has a lower rise time, a satisfied settling time, and low overshoot with good precision

Design and implementation of event-based multi-rate controllers for networked control systems

Tesis por compendio[ES] Con esta tesis se pretende dar solución a algunos de los problemas más habituales que aparecen en los Sistemas de control basados en red (NCS) como son los retardos variables en el tiempo, las pérdidas y el desorden de paquetes, y la restricción de ancho de banda y de recursos computacionales y energéticos de los dispositivos que forman parte del sistema de control. Para ello se ha planteado la integración de técnicas de control multifrecuencial, de control basado en paquetes, de control basado en predictor y de control basado en eventos. Los diseños de control realizados se han simulado utilizando Matlab-Simulink y Truetime, se ha analizado su estabilidad mediante LMIs y QFT, y se han validado experimentalmente en un péndulo invertido, un robot cartesiano 3D y en robots móviles de bajo coste. El artículo 1 aborda el control basado en eventos, el cual minimiza el ancho de banda consumido en el NCS mediante un control basado en eventos periódicos y presenta un método para obtener sus parámetros óptimos para el sistema específico en que se utilice. Los artículos 2, 4 y 6 añaden el control basado en paquetes, así como el control multifrecuencia, que aborda problemas de falta de datos por bajo uso del sensor y los retardos, pérdidas y desórdenes de paquetes en la red. También afrontan, mediante tecnicas de predicción basadas en un filtro de Kalman multifrecuencia variable en el tiempo, los problemas de ruido y perturbaciones, así como la observación de los estados completos del sistema. El artículo 7 hace frente a un modelo no lineal que utiliza las anteriores soluciones junto con un filtro de Kalman extendido para presentar otro tipo de estructura para un vehículo autónomo que, gracias a la información futura obtenida mediante estas técnicas, puede realizar de forma remota tareas de alto nivel como es la toma de decisiones y la monitorización de variables. Los artículos 3 y 5, presentan una forma de obtener y analizar la respuesta en frecuencia de sistemas SISO multifrecuencia y estudian su comportamiento ante ciertas incertidumbres o problemas en la red haciendo uso de procedimientos QFT.[CA] Amb aquesta tesi es pretén donar solució a alguns dels problemes més habituals que apareixen als Sistemes de Control Basats en xarxa (NCS) com son els retards d'accés i transferència variables en el temps, les pèrdues y desordenament de paquets, i la restricció d'ampli de banda així com de recursos computacionals i energètics dels dispositius que foment part del sistema de control. Per tal de resoldre'ls s'ha plantejat la integració de tècniques de control multifreqüencial, de control basat en paquets, de control basat en predictor i de control basat en events. Els dissenys de control realitzats s'han simulat fent ús de Matlab-Simulink i de TrueTime, s'ha analitzat la seua estabilitat mitjançant LMIs i QFT, i s'han validat experimentalment en un pèndul invertit, un robot cartesià 3D i en robots mòbils de baix cost. L'article 1 aborda el control basat en events, el qual minimitza l'ampli de banda consumit a l'NCS mitjançant un control basat en events periòdics i presenta un mètode per a obtindré els seus paràmetres òptims per al sistema específic en el qual s'utilitza. Els articles 2, 4 i 6 afegeixen el control basat en paquets, així com el control multifreqüència, que aborda problemes de falta de dades per el baix us del sensor i els retards, pèrdues i desordre de paquets en la xarxa. També afronten, mitjançant tècniques de predicció basades en un filtre de Kalman multifreqüència variable en el temps. Els problemes de soroll i pertorbacions, així com la observació dels estats complets del sistema. L'article 7 fa referència a un model no lineal que utilitza les anteriors solucions junt a un filtre de Kalman estès per a presentar altre tipus d'estructura per a un vehicle autònom que, gracies a la informació futura obtinguda mitjançant aquestes tècniques, pot realitzar de manera remota tasques d'alt nivell com son la presa de decisions i la monitorització de variables. Els articles 3 y 5 presenten la manera d'obtindre i analitzar la resposta en frequencia de sistemes SISO multifreqüència i estudien el seu comportament front a certes incerteses o problemes en la xarxa fent us de procediments QFT.[EN] This thesis attempts to solve some of the most frequent issues that appear in Networked Control Systems (NCS), such as time-varying delays, packet losses and packet disorders and the bandwidth limitation. Other frequent problems are scarce computational and energy resources of the local system devices. Thus, it is proposed to integrate multirate control, packet-based control, predictor-based control and event-based control techniques. The control designs have been simulated using Matlab-Simulink and Truetime, the stability has been analysed by LMIs and QFT, and the experimental validation has been done on an inverted pendulum, a 3D cartesian robot and in low-cost mobile robots. Paper 1 addresses event-based control, which minimizes the bandwidth consumed in NCS through a periodic event-triggered control and presents a method to obtain the optimal parameters for the specific system used. Papers 2, 4 and 6 include packet-based control and multirate control, addressing problems such as network delays, packet dropouts and packet disorders, and the scarce data due to low sensor usage in order to save battery in sensing tasks and transmissions of the sensed data. Also addressed, is how despite the existence of measurement noise and disturbances, time-varying dual-rate Kalman filter based prediction techniques observe the complete state of the system. Paper 7 tackles a non-linear model that uses all the previous solutions together with an extended Kalman filter to present another type of structure for an autonomous vehicle that, due to future information obtained through these techniques, can remotely carry out high level tasks, such as decision making and monitoring of variables. Papers 3 and 5, present a method for obtaining and analyzing the SISO dual-rate frequency response and using QFT procedures to study its behavior when faced with specific uncertainties or network problems.This work was supported by the Spanish Ministerio de Economía y Competitividad under Grant referenced TEC2012-31506.Alcaina Acosta, JJ. (2020). Design and implementation of event-based multi-rate controllers for networked control systems [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/159884TESISCompendi

Application of a robust QFT linear control method to the course changing manoeuvring of a ship

This paper describes in detail the design methodology of a robust QFT (Quantitative Feedback Theory) controller for the control of the course changing of a ship. A linear model is used with uncertainty in the parameters. The system is designed to fulfil the specifications of robust stability and robust tracking of a reference system

An antiwindup approach to power controller switching in an ambient healthcare network

This paper proposes a methodology for improved power controller switching in mobile Body Area Networks operating within the ambient healthcare environment. The work extends Anti-windup and Bumpless transfer results to provide a solution to the ambulatory networking problem that ensures sufficient biometric data can always be regenerated at the base station. The solution thereby guarantees satisfactory quality of service for healthcare providers. Compensation is provided for the nonlinear hardware constraints that are a typical feature of the type of network under consideration and graceful performance degradation in the face of hardware output power saturation is demonstrated, thus conserving network energy in an optimal fashion

QFT Based Robust Positioning Control of the PMSM Using Automatic Loop Shaping with Teaching Learning Optimization

Automation of the robust control system synthesis for uncertain systems is of great practical interest. In this paper, the loop shaping step for synthesizing quantitative feedback theory (QFT) based controller for a two-phase permanent magnet stepper motor (PMSM) has been automated using teaching learning-based optimization (TLBO) algorithm. The QFT controller design problem has been posed as an optimization problem and TLBO algorithm has been used to minimize the proposed cost function. This facilitates designing low-order fixed-structure controller, eliminates the need of manual loop shaping step on the Nichols charts, and prevents the overdesign of the controller. A performance comparison of the designed controller has been made with the classical PID tuning method of Ziegler-Nichols and QFT controller tuned using other optimization algorithms. The simulation results show that the designed QFT controller using TLBO offers robust stability, disturbance rejection, and proper reference tracking over a range of PMSM’s parametric uncertainties as compared to the classical design techniques