A Survey of Positioning Systems Using Visible LED Lights

© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.As Global Positioning System (GPS) cannot provide satisfying performance in indoor environments, indoor positioning technology, which utilizes indoor wireless signals instead of GPS signals, has grown rapidly in recent years. Meanwhile, visible light communication (VLC) using light devices such as light emitting diodes (LEDs) has been deemed to be a promising candidate in the heterogeneous wireless networks that may collaborate with radio frequencies (RF) wireless networks. In particular, light-fidelity has a great potential for deployment in future indoor environments because of its high throughput and security advantages. This paper provides a comprehensive study of a novel positioning technology based on visible white LED lights, which has attracted much attention from both academia and industry. The essential characteristics and principles of this system are deeply discussed, and relevant positioning algorithms and designs are classified and elaborated. This paper undertakes a thorough investigation into current LED-based indoor positioning systems and compares their performance through many aspects, such as test environment, accuracy, and cost. It presents indoor hybrid positioning systems among VLC and other systems (e.g., inertial sensors and RF systems). We also review and classify outdoor VLC positioning applications for the first time. Finally, this paper surveys major advances as well as open issues, challenges, and future research directions in VLC positioning systems.Peer reviewe

mmWave V2V Localization in MU-MIMO Hybrid Beamforming

Recent trends for vehicular localization in millimetre-wave (mmWave) channels include employing a combination of parameters such as angle of arrival (AOA), angle of departure (AOD), and time of arrival (TOA) of the transmitted/received signals. These parameters are challenging to estimate, which along with the scattering and random nature of mmWave channels, and vehicle mobility lead to errors in localization. To circumvent these challenges, this paper proposes mmWave vehicular localization employing difference of arrival for time and frequency, with multiuser (MU) multiple-input-multiple-output (MIMO) hybrid beamforming; rather than relying on AOD/AOA/TOA estimates. The vehicular localization can exploit the number of vehicles present, as an increase in a number of vehicles reduces the Cramr-Rao bound (CRB) of error estimation. At 10 dB signal-to-noise ratio (SNR) both spatial multiplexing and beamforming result in comparable localization errors. At lower SNR values, spatial multiplexing leads to larger errors compared to beamforming due to formation of spurious peaks in the cross ambiguity function. Accuracy of the estimated parameters is improved by employing an extended Kalman filter leading to a root mean square (RMS) localization error of approximately 6.3 meters

MmWave V2V Localization in MU-MIMO Hybrid Beamforming

Recent trends for vehicular localization in millimetre-wave (mmWave) channels include employing a combination of parameters such as angle of arrival (AOA), angle of departure (AOD), and time of arrival (TOA) of the transmitted/received signals. These parameters are challenging to estimate, which along with the scattering and random nature of mmWave channels, and vehicle mobility lead to errors in localization. To circumvent these challenges, this paper proposes mmWave vehicular localization employing difference of arrival for time and frequency, with multiuser (MU) multiple-input-multiple-output (MIMO) hybrid beamforming; rather than relying on AOD/AOA/TOA estimates. The vehicular localization can exploit the number of vehicles present, as an increase in a number of vehicles reduces the Cramr-Rao bound (CRB) of error estimation. At 10 dB signal-to-noise ratio (SNR) both spatial multiplexing and beamforming result in comparable localization errors. At lower SNR values, spatial multiplexing leads to larger errors compared to beamforming due to formation of spurious peaks in the cross ambiguity function. Accuracy of the estimated parameters is improved by employing an extended Kalman filter leading to a root mean square (RMS) localization error of approximately 6.3 meters

Beam and Channel Tracking for 5G Communication Systems Using Adaptive Filtering Techniques: A Comparison Study

In this paper, we study the problem of beam tracking of a multipath channel in millimeter-wave massive MIMO communication system using adaptive filters. We focus on the performance of least-mean-square filter (LMS) and recursive least-squares filter (RLS) algorithms, compared to a reference extended Kalman filter (EKF), in scenarios where the wireless channel is dominated by a single line of sight (LOS) path or a small number of strong paths. The signal direction and channel coefficients are tracked and updated using these filters. Our results recommend that beamforming systems at millimeter-wave bands should consider variable number of paths rather than a single dominant LOS path. Furthermore, we show that the mean squared-error (MSE) of the innovation process gives a better overall view of the tracking performance than the MSE of the state parameters

A Review of Indoor Millimeter Wave Device-based Localization and Device-free Sensing Technologies and Applications

The commercial availability of low-cost millimeter wave (mmWave) communication and radar devices is starting to improve the penetration of such technologies in consumer markets, paving the way for large-scale and dense deployments in fifth-generation (5G)-and-beyond as well as 6G networks. At the same time, pervasive mmWave access will enable device localization and device-free sensing with unprecedented accuracy, especially with respect to sub-6 GHz commercial-grade devices. This paper surveys the state of the art in device-based localization and device-free sensing using mmWave communication and radar devices, with a focus on indoor deployments. We first overview key concepts about mmWave signal propagation and system design. Then, we provide a detailed account of approaches and algorithms for localization and sensing enabled by mmWaves. We consider several dimensions in our analysis, including the main objectives, techniques, and performance of each work, whether each research reached some degree of implementation, and which hardware platforms were used for this purpose. We conclude by discussing that better algorithms for consumer-grade devices, data fusion methods for dense deployments, as well as an educated application of machine learning methods are promising, relevant and timely research directions.Comment: 43 pages, 13 figures. Accepted in IEEE Communications Surveys & Tutorials (IEEE COMST

Multipath tracking techniques for millimeter wave communications

L'obiettivo di questo elaborato è studiare il problema del tracciamento efficiente e continuo dell'angolo di arrivo dei cammini multipli dominanti in un canale radio ad onde millimetriche. In particolare, viene considerato uno scenario di riferimento in cui devono essere tracciati il cammino diretto da una stazione base e due cammini riflessi da ostacoli in diverse condizioni operative e di movimento dell'utente mobile. Si è assunto che l'utente mobile può effettuare delle misure rumorose di angolo di arrivo dei tre cammini, uno in linea di vista e gli altri due non in linea di vista, ed eventualmente delle misure di distanza tra esso e le tre "sorgenti" (ad esempio ricavandole da misure di potenza ricevuta). Utilizzando un modello "spazio degli stati", sono stati investigati due diversi approcci: il primo utilizza un fitraggio di Kalman direttamente sulle misure di angolo di arrivo, mentre il secondo adotta un metodo a due passi in cui lo stato è rappresentato dalle posizioni della stazione base e dei due ostacoli, dalle quali vengono valutate le stime degli angoli di arrivo. In entrambi i casi è stato investigato l'impatto che ha sulla stima la fusione dei dati ottenuti dai sensori inerziali integrati nel dispositivo, ovvero velocità angolare ed accelerazione del mobile, con le misure di angolo di arrivo. Successivamente ad una fase di modellazione matematica dei due approcci, essi sono stati implementati e testati in MATLAB, sviluppando un simulatore in cui l'utente possa scegliere il valore di vari parametri a seconda dello scenario desiderato. Le analisi effettuate hanno mostrato la robustezza delle strategie proposte in diverse condizioni operative