MonoPerfCap: Human Performance Capture from Monocular Video

We present the first marker-less approach for temporally coherent 3D performance capture of a human with general clothing from monocular video. Our approach reconstructs articulated human skeleton motion as well as medium-scale non-rigid surface deformations in general scenes. Human performance capture is a challenging problem due to the large range of articulation, potentially fast motion, and considerable non-rigid deformations, even from multi-view data. Reconstruction from monocular video alone is drastically more challenging, since strong occlusions and the inherent depth ambiguity lead to a highly ill-posed reconstruction problem. We tackle these challenges by a novel approach that employs sparse 2D and 3D human pose detections from a convolutional neural network using a batch-based pose estimation strategy. Joint recovery of per-batch motion allows to resolve the ambiguities of the monocular reconstruction problem based on a low dimensional trajectory subspace. In addition, we propose refinement of the surface geometry based on fully automatically extracted silhouettes to enable medium-scale non-rigid alignment. We demonstrate state-of-the-art performance capture results that enable exciting applications such as video editing and free viewpoint video, previously infeasible from monocular video. Our qualitative and quantitative evaluation demonstrates that our approach significantly outperforms previous monocular methods in terms of accuracy, robustness and scene complexity that can be handled.Comment: Accepted to ACM TOG 2018, to be presented on SIGGRAPH 201

RGBD Datasets: Past, Present and Future

Since the launch of the Microsoft Kinect, scores of RGBD datasets have been released. These have propelled advances in areas from reconstruction to gesture recognition. In this paper we explore the field, reviewing datasets across eight categories: semantics, object pose estimation, camera tracking, scene reconstruction, object tracking, human actions, faces and identification. By extracting relevant information in each category we help researchers to find appropriate data for their needs, and we consider which datasets have succeeded in driving computer vision forward and why. Finally, we examine the future of RGBD datasets. We identify key areas which are currently underexplored, and suggest that future directions may include synthetic data and dense reconstructions of static and dynamic scenes.Comment: 8 pages excluding references (CVPR style

Structured Light-Based 3D Reconstruction System for Plants.

Camera-based 3D reconstruction of physical objects is one of the most popular computer vision trends in recent years. Many systems have been built to model different real-world subjects, but there is lack of a completely robust system for plants. This paper presents a full 3D reconstruction system that incorporates both hardware structures (including the proposed structured light system to enhance textures on object surfaces) and software algorithms (including the proposed 3D point cloud registration and plant feature measurement). This paper demonstrates the ability to produce 3D models of whole plants created from multiple pairs of stereo images taken at different viewing angles, without the need to destructively cut away any parts of a plant. The ability to accurately predict phenotyping features, such as the number of leaves, plant height, leaf size and internode distances, is also demonstrated. Experimental results show that, for plants having a range of leaf sizes and a distance between leaves appropriate for the hardware design, the algorithms successfully predict phenotyping features in the target crops, with a recall of 0.97 and a precision of 0.89 for leaf detection and less than a 13-mm error for plant size, leaf size and internode distance

Novel haptic interface For viewing 3D images

In recent years there has been an explosion of devices and systems capable of displaying stereoscopic 3D images. While these systems provide an improved experience over traditional bidimensional displays they often fall short on user immersion. Usually these systems only improve depth perception by relying on the stereopsis phenomenon. We propose a system that improves the user experience and immersion by having a position dependent rendering of the scene and the ability to touch the scene. This system uses depth maps to represent the geometry of the scene. Depth maps can be easily obtained on the rendering process or can be derived from the binocular-stereo images by calculating their horizontal disparity. This geometry is then used as an input to be rendered in a 3D display, do the haptic rendering calculations and have a position depending render of the scene. The author presents two main contributions. First, since the haptic devices have a finite work space and limited resolution, we used what we call detail mapping algorithms. These algorithms compress geometry information contained in a depth map, by reducing the contrast among pixels, in such a way that it can be rendered into a limited resolution display medium without losing any detail. Second, the unique combination of a depth camera as a motion capturing system, a 3D display and haptic device to enhance user experience. While developing this system we put special attention on the cost and availability of the hardware. We decided to use only off-the-shelf, mass consumer oriented hardware so our experiments can be easily implemented and replicated. As an additional benefit the total cost of the hardware did not exceed the one thousand dollars mark making it affordable for many individuals and institutions

Camera positioning for 3D panoramic image rendering

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University London.Virtual camera realisation and the proposition of trapezoidal camera architecture are the two broad contributions of this thesis. Firstly, multiple camera and their arrangement constitute a critical component which affect the integrity of visual content acquisition for multi-view video. Currently, linear, convergence, and divergence arrays are the prominent camera topologies adopted. However, the large number of cameras required and their synchronisation are two of prominent challenges usually encountered. The use of virtual cameras can significantly reduce the number of physical cameras used with respect to any of the known camera structures, hence adequately reducing some of the other implementation issues. This thesis explores to use image-based rendering with and without geometry in the implementations leading to the realisation of virtual cameras. The virtual camera implementation was carried out from the perspective of depth map (geometry) and use of multiple image samples (no geometry). Prior to the virtual camera realisation, the generation of depth map was investigated using region match measures widely known for solving image point correspondence problem. The constructed depth maps have been compare with the ones generated using the dynamic programming approach. In both the geometry and no geometry approaches, the virtual cameras lead to the rendering of views from a textured depth map, construction of 3D panoramic image of a scene by stitching multiple image samples and performing superposition on them, and computation of virtual scene from a stereo pair of panoramic images. The quality of these rendered images were assessed through the use of either objective or subjective analysis in Imatest software. Further more, metric reconstruction of a scene was performed by re-projection of the pixel points from multiple image samples with a single centre of projection. This was done using sparse bundle adjustment algorithm. The statistical summary obtained after the application of this algorithm provides a gauge for the efficiency of the optimisation step. The optimised data was then visualised in Meshlab software environment, hence providing the reconstructed scene. Secondly, with any of the well-established camera arrangements, all cameras are usually constrained to the same horizontal plane. Therefore, occlusion becomes an extremely challenging problem, and a robust camera set-up is required in order to resolve strongly the hidden part of any scene objects. To adequately meet the visibility condition for scene objects and given that occlusion of the same scene objects can occur, a multi-plane camera structure is highly desirable. Therefore, this thesis also explore trapezoidal camera structure for image acquisition. The approach here is to assess the feasibility and potential of several physical cameras of the same model being sparsely arranged on the edge of an efficient trapezoid graph. This is implemented both Matlab and Maya. The quality of the depth maps rendered in Matlab are better in Quality

Optical techniques for 3D surface reconstruction in computer-assisted laparoscopic surgery

One of the main challenges for computer-assisted surgery (CAS) is to determine the intra-opera- tive morphology and motion of soft-tissues. This information is prerequisite to the registration of multi-modal patient-specific data for enhancing the surgeon’s navigation capabilites by observ- ing beyond exposed tissue surfaces and for providing intelligent control of robotic-assisted in- struments. In minimally invasive surgery (MIS), optical techniques are an increasingly attractive approach for in vivo 3D reconstruction of the soft-tissue surface geometry. This paper reviews the state-of-the-art methods for optical intra-operative 3D reconstruction in laparoscopic surgery and discusses the technical challenges and future perspectives towards clinical translation. With the recent paradigm shift of surgical practice towards MIS and new developments in 3D opti- cal imaging, this is a timely discussion about technologies that could facilitate complex CAS procedures in dynamic and deformable anatomical regions