Flexible joint robotic manipulator: Modeling and design of robust control law

This paper presents modeling and sophisticated control of a single Degree Of Freedom (DOF) flexible robotic arm. The derived model is based on Euler-Lagrange approach while the first and second order (super twisting) Sliding Mode Control (SMC) is proposed as a non-linear control strategy. The control laws are subjected to various test inputs including step and sinusoids to demonstrate their tracking efficiency by observing transient and steady state behaviours. Both orders of SMC are then compared to characterize the control performance in terms of robustness, handling external disturbances and chattering. Results dictate that the super twisting SMC is more accurate and robust against the external noise and chattering phenomena compared to the first order SMC

Planning of remote laser welding processes

The paper discusses the technical background of the remote laser welding (RLW) technology, its novel opportunities and implications for planning processes. Our ultimate goal is to develop a complete off-line programming toolbox for RLW which can provide an automated method for computing close-to-optimal robot programs. We suggest a workflow for the complete planning process, and propose new models and algorithms for solving the sequencing of welding tasks in conjunction with path planning, as well as for generating the inverse kinematics of the robot. The paper summarizes results of first computational experiments in an automotive case study using an industrial robot. The proposed method leads to a substantial reduction in the cycle time of the welding operation compared to an earlier approach

Optimizing task placement in robotic cells

The primary objective of this dissertation is to develop novel and practical techniques for optimal task placement in robotic cells. To this end, it is shown how task placement affect the efficiency of the cell, whether the task is automated fiber placement to create composite materials, gluing or inspection. Here, efficiency of the cell is defined by either cycle time of the production or distance to singularity, having collision avoidance as a constraint. Task placement, even for one robotic arm, is an under-constrained problem in nature. This issue drastically grows in case of redundant robotic cells. Actuator redundancy in robotic cells is added by either a positioner or another manipulator. This work is focused on taking advantage of redundancy in robotic cells and optimizing it for better performance. One of the main challenges here is to identify the number of independent placement parameters. Therefore, we ignore ineffective variables and only focus on minimum number of parameters possible. Hence, faster optimization process and more precise results are obtained. Another challenge is in motion planning of redundant cells. Because there can be infinite solutions for such cells, there is room for optimization. In this work, we propose methods to fix the optimal placement of the task and, furthermore, assign the optimal motion planning to all manipulators in the cell, simultaneously. A novel method is proposed to identify the number of independent parameters and applied to a gluing path for a coordinated redundant robotic workcell. The workcell consists of a generic six-DOF serial manipulator and a one-DOF redundancy provider (RP). Two cases of RPs are investigated, namely a rotary table and a linear guide. An innovative method using swept volume is proposed for determining the number of independent parameters for both cases under study. The outcome of this study is an intuitive method to identify the number of independent parameters in redundant cells. The results are compared between using all initial parameters, as contrary to only the independent ones. It is proven that the proposed method improves the optimization efficiency by 32%. Moreover, the performance of the rotary table is compared to the linear guide, for a specific gluing application. Optimization methods in this work are based on Particle Swarm Optimization (PSO). A workcell consisting of a six degrees of freedom (DOF) serial manipulator, a six-DOF parallel manipulator and a rotary table mounted on the parallel manipulator is studies for automated fiber placement task. The solution to motion planning is obtained considering the singularities of the serial manipulator and the workspace boundaries of all manipulators. The algorithm to obtain the optimum path placement is explained through a simple example and the results for a helix path with nearly 2,700 points around the workpiece is represented. The results for motion planning are represented where distance to singularity is maximized, collision avoidance and workspace boundaries are respected. The result is obtained after 10 iterations with 20 particles. This outcome of this study is a reliable and easy to apply motion planning algorithm to be used in redundant cells. Another challenge in this work is combinatorial task placement that arises in robotic inspection cells. The goal is to improve the efficiency of a turbine blade inspection cell through optimizing the placement of the camera and optimizing the sequence of the images. The workcell contains a six-DOF serial manipulator that is holding the blade and shows it to the camera from different angles, whereas the camera takes inspection images. The problem at hand consists of a six-DOF continuous optimization for camera placement and discrete combinatorial optimization of sequence of images (end-effector poses). A novel combined approach is introduced, called Blind Dynamic Particle Swarm Optimization (BD-PSO), to simultaneously obtain the optimal design for both domains. Our objective is to minimize the cycle time, while avoiding any collisions in the workcell during the inspection operation. Even though PSO is vastly used in engineering problems, novelty of the proposed combinatorial optimization method is in its ability to be used efficiently in the traveling salesman problems where the distances between cities are unknown (blind) and the distances are subject to change (dynamic). This highly unpredictable domain is the case of the inspection cell where the cycle time between images will change for different camera placements. The cycle time is calculated based on weighted joint travel time of the robot. All the eight configurations of the robot are taken into the consideration, therefore, robot’s configuration is optimized in the final result as well. The outcome of this study is an innovative hybrid algorithm to simultaneously solve combinatorial and continues problems. Results show fast convergence and reliable motions. The test of benchmarks selected from TSPLIB shows that the results obtained by this algorithm are better and closer to the theoretical optimal values with better robustness than those obtained by other methods. The best placement of camera and best image sequence (for 8 images) is obtained after 11 iterations using 30 particles. In general, the main results of this thesis are three algorithms: an algorithm to obtain minimum number of placement parameters in redundant robotic workcells; an algorithm for motion planning of highly redundant cells; and an algorithm to optimize camera placement and simultaneously obtain the optimal image sequence in an inspection cell

Robot Manipulators

Robot manipulators are developing more in the direction of industrial robots than of human workers. Recently, the applications of robot manipulators are spreading their focus, for example Da Vinci as a medical robot, ASIMO as a humanoid robot and so on. There are many research topics within the field of robot manipulators, e.g. motion planning, cooperation with a human, and fusion with external sensors like vision, haptic and force, etc. Moreover, these include both technical problems in the industry and theoretical problems in the academic fields. This book is a collection of papers presenting the latest research issues from around the world

Force-controlled Transcranial Magnetic Stimulation (TMS) robotic system

The use of robots to assist neurologists in Transcranial Magnetic Stimulation (TMS) has the potential to improve the long term outcome of brain stimulation. Although extensive research has been carried out on TMS robotic system, no single study exists which adequately take into account the control of interaction of contact force between the robot and subject’s head. Thus, the introduction of force feedback control is considered as a desirable feature, and is particularly important when using an autonomous robot manipulator. In this study, a force-controlled TMS robotic system has been developed, which consists of a 6 degree of freedom (DOF) articulated robot arm, a force/torque sensor system to measure contact force and real-time PC based control system. A variant of the external force control scheme was successfully implemented to carry out the simultaneous force and position control in real-time. A number of engineering challenges are addressed to develop a viable system for TMS application; simultaneous real-time force and position tracking on subject’s head, unknown/varies environment stiffness and motion compensation to counter the force-controlled instability problems, and safe automated robotic system. Simulation of a single axis force-controlled robotic system has been carried out, which includes a task of maintaining contact on simulated subject’s head. The results provide a good agreement with parallel experimental tests, which leads to further improvement to the robot force control. An Adaptive Neuro-Fuzzy Force Controller has been developed to provide stable and robust force control on unknown environment stiffness and motion. The potential of the proposed method has been further illustrated and verified through a comprehensive series of experiments. This work also lays important foundations for long term related research, particularly in the development of real-time medical robotic system and new techniques of force control mainly for human-robot interaction. KEY WORDS: Transcranial Magnetic Stimulation, Robotic System, Real-time System, External Force Control Scheme, Adaptive Neuro-Fuzzy Force ControllerEThOS - Electronic Theses Online ServiceGBUnited Kingdo

Force-controlled Transcranial Magnetic Stimulation (TMS) robotic system

The use of robots to assist neurologists in Transcranial Magnetic Stimulation (TMS) has the potential to improve the long term outcome of brain stimulation. Although extensive research has been carried out on TMS robotic system, no single study exists which adequately take into account the control of interaction of contact force between the robot and subject’s head. Thus, the introduction of force feedback control is considered as a desirable feature, and is particularly important when using an autonomous robot manipulator. In this study, a force-controlled TMS robotic system has been developed, which consists of a 6 degree of freedom (DOF) articulated robot arm, a force/torque sensor system to measure contact force and real-time PC based control system. A variant of the external force control scheme was successfully implemented to carry out the simultaneous force and position control in real-time. A number of engineering challenges are addressed to develop a viable system for TMS application; simultaneous real-time force and position tracking on subject’s head, unknown/varies environment stiffness and motion compensation to counter the force-controlled instability problems, and safe automated robotic system. Simulation of a single axis force-controlled robotic system has been carried out, which includes a task of maintaining contact on simulated subject’s head. The results provide a good agreement with parallel experimental tests, which leads to further improvement to the robot force control. An Adaptive Neuro-Fuzzy Force Controller has been developed to provide stable and robust force control on unknown environment stiffness and motion. The potential of the proposed method has been further illustrated and verified through a comprehensive series of experiments. This work also lays important foundations for long term related research, particularly in the development of real-time medical robotic system and new techniques of force control mainly for human-robot interaction. KEY WORDS: Transcranial Magnetic Stimulation, Robotic System, Real-time System, External Force Control Scheme, Adaptive Neuro-Fuzzy Force ControllerEThOS - Electronic Theses Online ServiceGBUnited Kingdo

Robots in machining

Robotic machining centers offer diverse advantages: large operation reach with large reorientation capability, and a low cost, to name a few. Many challenges have slowed down the adoption or sometimes inhibited the use of robots for machining tasks. This paper deals with the current usage and status of robots in machining, as well as the necessary modelling and identification for enabling optimization, process planning and process control. Recent research addressing deburring, milling, incremental forming, polishing or thin wall machining is presented. We discuss various processes in which robots need to deal with significant process forces while fulfilling their machining task

Contemporary Robotics

This book book is a collection of 18 chapters written by internationally recognized experts and well-known professionals of the field. Chapters contribute to diverse facets of contemporary robotics and autonomous systems. The volume is organized in four thematic parts according to the main subjects, regarding the recent advances in the contemporary robotics. The first thematic topics of the book are devoted to the theoretical issues. This includes development of algorithms for automatic trajectory generation using redudancy resolution scheme, intelligent algorithms for robotic grasping, modelling approach for reactive mode handling of flexible manufacturing and design of an advanced controller for robot manipulators. The second part of the book deals with different aspects of robot calibration and sensing. This includes a geometric and treshold calibration of a multiple robotic line-vision system, robot-based inline 2D/3D quality monitoring using picture-giving and laser triangulation, and a study on prospective polymer composite materials for flexible tactile sensors. The third part addresses issues of mobile robots and multi-agent systems, including SLAM of mobile robots based on fusion of odometry and visual data, configuration of a localization system by a team of mobile robots, development of generic real-time motion controller for differential mobile robots, control of fuel cells of mobile robots, modelling of omni-directional wheeled-based robots, building of hunter- hybrid tracking environment, as well as design of a cooperative control in distributed population-based multi-agent approach. The fourth part presents recent approaches and results in humanoid and bioinspirative robotics. It deals with design of adaptive control of anthropomorphic biped gait, building of dynamic-based simulation for humanoid robot walking, building controller for perceptual motor control dynamics of humans and biomimetic approach to control mechatronic structure using smart materials

Advances in Robotics, Automation and Control

The book presents an excellent overview of the recent developments in the different areas of Robotics, Automation and Control. Through its 24 chapters, this book presents topics related to control and robot design; it also introduces new mathematical tools and techniques devoted to improve the system modeling and control. An important point is the use of rational agents and heuristic techniques to cope with the computational complexity required for controlling complex systems. Through this book, we also find navigation and vision algorithms, automatic handwritten comprehension and speech recognition systems that will be included in the next generation of productive systems developed by man

r逐次更新型作業者モデルによる行動予測とその不確実性に基づく協働ロボット向け動作計画

Tohoku University小菅一弘課