1,720 research outputs found
Design of an Anthropomorphic, Compliant, and Lightweight Dual Arm for Aerial Manipulation
This paper presents an anthropomorphic, compliant and lightweight dual arm manipulator designed and developed for aerial manipulation applications with multi-rotor platforms. Each arm provides four degrees of freedom in a human-like kinematic configuration for end effector positioning: shoulder pitch, roll and yaw, and elbow pitch. The dual arm, weighting 1.3 kg in total, employs smart servo actuators and a customized and carefully designed aluminum frame structure manufactured by laser cut. The proposed
design reduces the manufacturing cost as no computer numerical control machined part is used. Mechanical joint compliance is provided in all the joints, introducing a compact spring-lever transmission mechanism between the servo shaft and the links, integrating a potentiometer for measuring the deflection of the joints.
The servo actuators are partially or fully isolated against impacts and overloads thanks to the ange bearings attached to the frame structure that support the rotation of the links and the deflection of the joints. This simple mechanism increases the robustness of the arms and safety in the physical interactions between the aerial
robot and the environment. The developed manipulator has been validated through different experiments in fixed base test-bench and in outdoor flight tests.UniĂłn Europea H2020-ICT-2014- 644271Ministerio de EconomĂa y Competitividad DPI2015-71524-RMinisterio de EconomĂa y Competitividad DPI2017-89790-
Improved GelSight Tactile Sensor for Measuring Geometry and Slip
A GelSight sensor uses an elastomeric slab covered with a reflective membrane
to measure tactile signals. It measures the 3D geometry and contact force
information with high spacial resolution, and successfully helped many
challenging robot tasks. A previous sensor, based on a semi-specular membrane,
produces high resolution but with limited geometry accuracy. In this paper, we
describe a new design of GelSight for robot gripper, using a Lambertian
membrane and new illumination system, which gives greatly improved geometric
accuracy while retaining the compact size. We demonstrate its use in measuring
surface normals and reconstructing height maps using photometric stereo. We
also use it for the task of slip detection, using a combination of information
about relative motions on the membrane surface and the shear distortions. Using
a robotic arm and a set of 37 everyday objects with varied properties, we find
that the sensor can detect translational and rotational slip in general cases,
and can be used to improve the stability of the grasp.Comment: IEEE/RSJ International Conference on Intelligent Robots and System
Body randomization reduces the sim-to-real gap for compliant quadruped locomotion
Designing controllers for compliant, underactuated robots is challenging and usually requires a learning procedure. Learning robotic control in simulated environments can speed up the process whilst lowering risk of physical damage. Since perfect simulations are unfeasible, several techniques are used to improve transfer to the real world. Here, we investigate the impact of randomizing body parameters during learning of CPG controllers in simulation. The controllers are evaluated on our physical quadruped robot. We find that body randomization in simulation increases chances of finding gaits that function well on the real robot
Recommended from our members
Simultaneously encoding movement and sEMG-based stiffness for robotic skill learning
Transferring human stiffness regulation strategies to robots enables them to effectively and efficiently acquire adaptive impedance control policies to deal with uncertainties during the accomplishment of physical contact tasks in an unstructured environment. In this work, we develop such a physical human-robot interaction (pHRI) system which allows robots to learn variable impedance skills from human demonstrations. Specifically, the biological signals, i.e., surface electromyography (sEMG) are utilized for the extraction of human arm stiffness features during the task demonstration. The estimated human arm stiffness is then mapped into a robot impedance controller. The dynamics of both movement and stiffness are simultaneously modeled by using a model combining the hidden semi-Markov model (HSMM) and the Gaussian mixture regression (GMR). More importantly, the correlation between the movement information and the stiffness information is encoded in a systematic manner. This approach enables capturing uncertainties over time and space and allows the robot to satisfy both position and stiffness requirements in a task with modulation of the impedance controller. The experimental study validated the proposed approach
Survey of Visual and Force/Tactile Control of Robots for Physical Interaction in Spain
Sensors provide robotic systems with the information required to perceive the changes that happen in unstructured environments and modify their actions accordingly. The robotic controllers which process and analyze this sensory information are usually based on three types of sensors (visual, force/torque and tactile) which identify the most widespread robotic control strategies: visual servoing control, force control and tactile control. This paper presents a detailed review on the sensor architectures, algorithmic techniques and applications which have been developed by Spanish researchers in order to implement these mono-sensor and multi-sensor controllers which combine several sensors
A Sensorized Instrument for Minimally Invasive Surgery for the Measurement of Forces during Training and Surgery: Development and Applications
The reduced access conditions present in Minimally Invasive Surgery (MIS) affect the feel of interaction forces between the instruments and the tissue being treated. This loss of haptic information compromises the safety of the procedure and must be overcome through training. Haptics in MIS is the subject of extensive research, focused on establishing force feedback mechanisms and developing appropriate sensors. This latter task is complicated by the need to place the sensors as close as possible to the instrument tip, as the measurement of forces outside of the patient\u27s body does not represent the true tool--tissue interaction. Many force sensors have been proposed, but none are yet available for surgery. The objectives of this thesis were to develop a set of instruments capable of measuring tool--tissue force information in MIS, and to evaluate the usefulness of force information during surgery and for training and skills assessment. To address these objectives, a set of laparoscopic instruments was developed that can measure instrument position and tool--tissue interaction forces in multiple degrees of freedom. Different design iterations and the work performed towards the development of a sterilizable instrument are presented. Several experiments were performed using these instruments to establish the usefulness of force information in surgery and training. The results showed that the combination of force and position information can be used in the development of realistic tissue models or haptic interfaces specifically designed for MIS. This information is also valuable in order to create tactile maps to assist in the identification of areas of different stiffness. The real-time measurement of forces allows visual force feedback to be presented to the surgeon. When applied to training scenarios, the results show that experience level correlates better with force-based metrics than those currently used in training simulators. The proposed metrics can be automatically computed, are completely objective, and measure important aspects of performance. The primary contribution of this thesis is the design and development of highly versatile instruments capable of measuring force and position during surgery. A second contribution establishes the importance and usefulness of force data during skills assessment, training and surgery
Hubungan di antara pengaturan kerja fleksibel dan prestasi pekerja dalam kalangan ejen insurans wanita
Ejen insurans merupakan jurujual pertengahan bagi syarikat insurans di mana mereka memainkan peranan penting dalam memberi khidmat nasihat kewangan (Hannah, 2011). Ejen insurans bekerja berdasarkan persekitaran pengaturan kerja yang fleksibel di mana mereka boleh menyediakan jadual waktu bekerja sendiri. Sebahagian daripada mereka bertemu dengan pelanggan pada waktu perniagaan siang hari, sementara yang lain pula membuat kertas kerja dan menyediakan konsultasi untuk pelanggan pada waktu petang. Kebanyakan mereka bekerja selama 40 jam seminggu dan ada juga beberapa ejen yang bekerja lebih lama daripada 40 jam (Hannah, 2011). Prestasi ejen insurans sangat penting untuk mengekalkan jenama produk insurans. Penilaian terhadap prestasi di kalangan ejen insurans biasanya bergantung kepada kejayaan atau kegagalan mencapai sasaran penjualan (Insurance Agent Job Overview, 2019). Proses menjual produk insurans memerlukan masa kerana mereka perlu mendekati pelanggan sebanyak mungkin dan ketersediaan waktu bekerja yang tidak tetap
Design, implementation, and evaluation of a variable stiffness transradial hand prosthesis
We present the design, implementation, and experimental evaluation of a low-cost, customizable, easy-to-use transradial hand prosthesis capable of adapting its compliance. Variable stiffness actuation (VSA) of the prosthesis is based on antagonistically arranged tendons coupled to nonlinear springs driven through a Bowden cable based power transmission. Bowden cable based antagonistic VSA can, not only regulate the stiffness and the position of the prosthetic hand but also enables a light-weight and low-cost design, by the opportunistic placement of motors, batteries, and controllers on any convenient location on the human body, while nonlinear springs are conveniently integrated inside the forearm. The transradial hand prosthesis also features tendon driven underactuated compliant fingers that allow natural adaption of the hand shape to wrap around a wide variety of object geometries, while the modulation of the stiffness of their drive tendons enables the prosthesis to perform various tasks with high dexterity. The compliant fingers of the prosthesis add inherent robustness and flexibility, even under impacts. The control of the variable stiffness transradial hand prosthesis is achieved by an sEMG based natural human-machine interface
- âŠ