222 research outputs found

    Fuzzy logic control for energy saving in autonomous electric vehicles

    Get PDF
    Limited battery capacity and excessive battery dimensions have been two major limiting factors in the rapid advancement of electric vehicles. An alternative to increasing battery capacities is to use better: intelligent control techniques which save energy on-board while preserving the performance that will extend the range with the same or even smaller battery capacity and dimensions. In this paper, we present a Type-2 Fuzzy Logic Controller (Type-2 FLC) as the speed controller, acting as the Driver Model Controller (DMC) in Autonomous Electric Vehicles (AEV). The DMC is implemented using realtime control hardware and tested on a scaled down version of a back to back connected brushless DC motor setup where the actual vehicle dynamics are modelled with a Hardware-In-the-Loop (HIL) system. Using the minimization of the Integral Absolute Error (IAE) has been the control design criteria and the performance is compared against Type-1 Fuzzy Logic and Proportional Integral Derivative DMCs. Particle swarm optimization is used in the control design. Comparisons on energy consumption and maximum power demand have been carried out using HIL system for NEDC and ARTEMIS drive cycles. Experimental results show that Type-2 FLC saves energy by a substantial amount while simultaneously achieving the best IAE of the control strategies tested

    Data Mining Technology for Structural Control Systems: Concept, Development, and Comparison

    Get PDF
    Structural control systems are classified into four categories, that is, passive, active, semi-active, and hybrid systems. These systems must be designed in the best way to control harmonic motions imposed to structures. Therefore, a precise powerful computer-based technology is required to increase the damping characteristics of structures. In this direction, data mining has provided numerous solutions to structural damped system problems as an all-inclusive technology due to its computational ability. This chapter provides a broad, yet in-depth, overview in data mining including knowledge view (i.e., concept, functions, and techniques) as well as application view in damped systems, shock absorbers, and harmonic oscillators. To aid the aim, various data mining techniques are classified in three groups, that is, classification-, prediction-, and optimization-based data mining methods, in order to present the development of this technology. According to this categorization, the applications of statistical, machine learning, and artificial intelligence techniques with respect to vibration control system research area are compared. Then, some related examples are detailed in order to indicate the efficiency of data mining algorithms. Last but not least, capabilities and limitations of the most applicable data mining-based methods in structural control systems are presented. To the best of our knowledge, the current research is the first attempt to illustrate the data mining applications in this domain

    The relevance of outsourcing and leagile strategies in performance optimization of an integrated process planning and scheduling

    Get PDF
    Over the past few years growing global competition has forced the manufacturing industries to upgrade their old production strategies with the modern day approaches. As a result, recent interest has been developed towards finding an appropriate policy that could enable them to compete with others, and facilitate them to emerge as a market winner. Keeping in mind the abovementioned facts, in this paper the authors have proposed an integrated process planning and scheduling model inheriting the salient features of outsourcing, and leagile principles to compete in the existing market scenario. The paper also proposes a model based on leagile principles, where the integrated planning management has been practiced. In the present work a scheduling problem has been considered and overall minimization of makespan has been aimed. The paper shows the relevance of both the strategies in performance enhancement of the industries, in terms of their reduced makespan. The authors have also proposed a new hybrid Enhanced Swift Converging Simulated Annealing (ESCSA) algorithm, to solve the complex real-time scheduling problems. The proposed algorithm inherits the prominent features of the Genetic Algorithm (GA), Simulated Annealing (SA), and the Fuzzy Logic Controller (FLC). The ESCSA algorithm reduces the makespan significantly in less computational time and number of iterations. The efficacy of the proposed algorithm has been shown by comparing the results with GA, SA, Tabu, and hybrid Tabu-SA optimization methods

    Hardware Simulation of Rear-End Collision Avoidance System Based on Fuzzy Logic

    Get PDF
    Rear-end collisions are the most common type of traffc accident. On the highway, a real-end collision may involve more than two vehicles and cause a pile-up or chain-reaction crash. Referring to data released by the Australian Capital Territory (ACT), rear-end  collisions which occurred throughout 2010 constituted as much as 43.65% of all collisions. In most cases, these rear-end collisions are caused by inattentive drivers, adverse road conditions and poor following distance. The Rear-end Collision Avoidance System (RCAS) is a device to help drivers to avoid rear-end collisions. The RCAS is a subsystem of Advanced Driver Assistance Systems (ADASs) and became an important part of the driverless car. This paper discusses a hardware simulation of a RCAS based on fuzzy logic using a remote control car. The Mamdani method was used as a fuzzy inference system and realized by using the Arduiono Uno microcontroller system. Simulation results showed that the fuzzy logic algorithm of RCAS can work as designed

    Railway Engineering: Timetable Planning and Control, Artificial Intelligence and Externalities

    Get PDF
    This chapter is a case study of the dissemination of railway engineering research in Latin America developed by a railway engineering research group. The leader of the group is a female researcher. The authors aim to inspire to other women researchers in Latin American and Caribbean (LAC) countries who are trying to develop research in IT areas, many times facing serious difficulties, incomprehension, and great challenges. This chapter is divided in set sections like introduction, background, development of railway engineering research. This third section is divided into subsections like timetable planning and trains control, characterization of Panama metro line 1, dwelling times, fuzzy logic, artificial intelligence, social-economics railway externalities, and environmental railway externalities. The fourth section presents the results of the relationship between research activity and teaching of railway engineering obtained in this case study. Finally, the authors present a brief vision about future and emerging regional trends about railway engineering projects.This chapter is a case study of the dissemination of railway engineering research in Latin America developed by a railway engineering research group. The leader of the group is a female researcher. The authors aim to inspire to other women researchers in Latin American and Caribbean (LAC) countries who are trying to develop research in IT areas, many times facing serious difficulties, incomprehension, and great challenges. This chapter is divided in set sections like introduction, background, development of railway engineering research. This third section is divided into subsections like timetable planning and trains control, characterization of Panama metro line 1, dwelling times, fuzzy logic, artificial intelligence, social-economics railway externalities, and environmental railway externalities. The fourth section presents the results of the relationship between research activity and teaching of railway engineering obtained in this case study. Finally, the authors present a brief vision about future and emerging regional trends about railway engineering projects

    Power Quality Improvement and Low Voltage Ride through Capability in Hybrid Wind-PV Farms Grid-Connected Using Dynamic Voltage Restorer

    Get PDF
    © 2018 IEEE. Translations and content mining are permitted for academic research only. Personal use is also permitted, but republication/redistribution requires IEEE permission.This paper proposes the application of a dynamic voltage restorer (DVR) to enhance the power quality and improve the low voltage ride through (LVRT) capability of a three-phase medium-voltage network connected to a hybrid distribution generation system. In this system, the photovoltaic (PV) plant and the wind turbine generator (WTG) are connected to the same point of common coupling (PCC) with a sensitive load. The WTG consists of a DFIG generator connected to the network via a step-up transformer. The PV system is connected to the PCC via a two-stage energy conversion (dc-dc converter and dc-ac inverter). This topology allows, first, the extraction of maximum power based on the incremental inductance technique. Second, it allows the connection of the PV system to the public grid through a step-up transformer. In addition, the DVR based on fuzzy logic controller is connected to the same PCC. Different fault condition scenarios are tested for improving the efficiency and the quality of the power supply and compliance with the requirements of the LVRT grid code. The results of the LVRT capability, voltage stability, active power, reactive power, injected current, and dc link voltage, speed of turbine, and power factor at the PCC are presented with and without the contribution of the DVR system.Peer reviewe

    Adaptive Building Envelope: An Integral Approach to Indoor Environment Control in Buildings

    Get PDF
    The problem of energy consumption of buildings is complex and multidimensional, as it is a cross section of building envelope performance, indoor environmental conditions and user demands and preferences. In order to fulfil the EU goal stated in the 2020 climate and energy package and beyond, the implementation of high-performance buildings is crucial. Part of the solution is properly designed, flexible and adequately controlled building envelope that can contribute to reduced energy consumption and to increased occupancy comfort. In the presented chapter first, a structured treatment of the indoor environment formation is proposed that can be used in order to define appropriate fields of interventions when designing building automation systems. Furthermore, interaction between adaptive building envelope elements, indoor and exterior environment is discussed and elaborated. Second, the conventional and artificial intelligence control approaches used in building automation are discussed and commented, whereas advantages and disadvantages of each group are discussed. At the end, an example of building automation system designed on the principles of a holistic treatment of indoor environment in buildings is presented. The discussed system was designed at the Faculty of Civil and Geodetic Engineering using a combination of conventional and artificial intelligence control methods

    Artificial Intelligence-based Control Techniques for HVDC Systems

    Get PDF
    The electrical energy industry depends, among other things, on the ability of networks to deal with uncertainties from several directions. Smart-grid systems in high-voltage direct current (HVDC) networks, being an application of artificial intelligence (AI), are a reliable way to achieve this goal as they solve complex problems in power system engineering using AI algorithms. Due to their distinctive characteristics, they are usually effective approaches for optimization problems. They have been successfully applied to HVDC systems. This paper presents a number of issues in HVDC transmission systems. It reviews AI applications such as HVDC transmission system controllers and power flow control within DC grids in multi-terminal HVDC systems. Advancements in HVDC systems enable better performance under varying conditions to obtain the optimal dynamic response in practical settings. However, they also pose difficulties in mathematical modeling as they are non-linear and complex. ANN-based controllers have replaced traditional PI controllers in the rectifier of the HVDC link. Moreover, the combination of ANN and fuzzy logic has proven to be a powerful strategy for controlling excessively non-linear loads. Future research can focus on developing AI algorithms for an advanced control scheme for UPFC devices. Also, there is a need for a comprehensive analysis of power fluctuations or steady-state errors that can be eliminated by the quick response of this control scheme. This survey was informed by the need to develop adaptive AI controllers to enhance the performance of HVDC systems based on their promising results in the control of power systems. Doi: 10.28991/ESJ-2023-07-02-024 Full Text: PD

    Optimization of stand-alone photovoltaic system by implementing fuzzy logic MPPT controller

    Get PDF
    A photovoltaic (PV) generator is a nonlinear device having insolation-dependent volt-ampere characteristics. Since the maximum-power point varies with solar insolation, it is difficult to achieve an optimum matching that is valid for all insolation levels. Thus, Maximum power point tracking (MPPT) plays an important roles in photovoltaic (PV) power systems because it maximize the power output from a PV system for a given set of condition, and therefore maximize their array efficiency. This project presents a maximum power point tracker (MPPT) using Fuzzy Logic theory for a PV system. The work is focused on a comparative study between most conventional controller namely Perturb and Observe (P&O) algorithm and is compared to a design fuzzy logic controller (FLC). The introduction of fuzzy controller has given very good performance on whatever the parametric variation of the system

    Experimental Analysis of a Fuzzy Scheme against a Robust Controller for a Proton Exchange Membrane Fuel Cell System

    Get PDF
    Proton exchange membrane fuel cells (PEMFC) are capable of transforming chemical energy into electrical energy with zero emissions. Therefore, these devices had been a point of attention for the scientific community as to provide another solution to renewable sources of energy. Since the PEMFC is commonly driven with a power converter, a controller has to be implemented to supply a convenient voltage. This is an important task as it allows the system to be driven at an operative point, which can be related to the maximum power or an user desired spot. Along this research article, a robust controller was compared against a fuzzy logic strategy (with symmetric membership functions) where both were implemented to a commercial PEMFC through a dSPACE 1102 control board. Both proposals were analysed in an experimental test bench. Outcomes showed the advantages and disadvantages of each scheme in chattering reduction, accuracy, and convergence speed.This research was funded by the Basque Government through project EKOHEGAZ (ELKARTEK KK-2021/00092), by the Diputación Foral de Álava (DFA), through project CONAVANTER, and by the UPV/EHU, through project GIU20/063
    • 

    corecore