Finite element modelling of material deformation and damage by tension under cyclic bending and compression test

Material deformation is determined by strain and stress states resulted from loading conditions applied on the material during the manufacturing process. Different testing methods, for example, uniaxial tensile test and dome test have been used to predict material deformation behavior during the manufacturing processes. However, under a complex deformation mode, materials display distinct deformation behavior. In double side incremental forming (DSIF) process, it has been widely acknowledged that the material deformation consists of stretching, bending, shearing, compression with cyclic loading. This leads to a significant material formability enhancement comparing to conventional sheet metal forming processes. This phenomenon cannot be explained by using the currently available testing methods because the complexity of the DSIF process prohibits a direct investigation of the influence of individual deformation modes. To simplify the loading conditions and to investigate their individual and interactive effects contributing to the formability enhancement in DSIF, in this study, a novel testing method of Tension under Cyclic Bending and Compression (TCBC) is proposed, through which the effect of stretching, bending, compression and cyclic loading can be independently evaluated. A finite element (FE) damage modelling of the TCBC test was developed by incorporating the shear-modified Gurson-Tvergaard-Needleman (GTN) model into the Abaqus/Explicit solver. The results showed that the damage accumulation in the material was suppressed due to the localized and cyclic material deformation. An enhanced material formability was obtained by using the FE damage modelling and the periodical accumulation of the damage showed that the TCBC test could be a possible representation of the material deformation in DSIF

Part accuracy improvement in two point incremental forming with a partial die using a model predictive control algorithm

As a flexible forming technology, Incremental Sheet Forming (ISF) is a promising alternative to traditional sheet forming processes in small-batch or customised production but suffers from low part accuracy in terms of its application in the industry. The ISF toolpath has direct influences on the geometric accuracy of the formed part since the part is formed by a simple tool following the toolpath. Based on the basic structure of a simple Model Predictive Control (MPC) algorithm designed for Single Point Incremental Forming (SPIF) in our previous work Lu et al. (2015) [1] that only dealt with the toolpath correction in the vertical direction, an enhanced MPC algorithm has been developed specially for Two Point Incremental Forming (TPIF) with a partial die in this work. The enhanced control algorithm is able to correct the toolpath in both the vertical and horizontal directions. In the newly-added horizontal control module, intensive profile points in the evenly distributed radial directions of the horizontal section were used to estimate the horizontal error distribution along the horizontal sectional profile during the forming process. The toolpath correction was performed through properly adjusting the toolpath in two directions based on the optimised toolpath parameters at each step. A case study for forming a non-axisymmetric shape was conducted to experimentally validate the developed toolpath correction strategy. Experiment results indicate that the two-directional toolpath correction approach contributes to part accuracy improvement in TPIF compared with the typical TPIF process that is without toolpath correction

Mass Production Processes

It is always hard to set manufacturing systems to produce large quantities of standardized parts. Controlling these mass production lines needs deep knowledge, hard experience, and the required related tools as well. The use of modern methods and techniques to produce a large quantity of products within productive manufacturing processes provides improvements in manufacturing costs and product quality. In order to serve these purposes, this book aims to reflect on the advanced manufacturing systems of different alloys in production with related components and automation technologies. Additionally, it focuses on mass production processes designed according to Industry 4.0 considering different kinds of quality and improvement works in mass production systems for high productive and sustainable manufacturing. This book may be interesting to researchers, industrial employees, or any other partners who work for better quality manufacturing at any stage of the mass production processes

Review on the influence of process parameters in incremental sheet forming

Incremental sheet forming (ISF) is a relatively new flexible forming process. ISF has excellent adaptability to conventional milling machines and requires minimum use of complex tooling, dies and forming press, which makes the process cost-effective and easy to automate for various applications. In the past two decades, extensive research on ISF has resulted in significant advances being made in fundamental understanding and development of new processing and tooling solutions. However, ISF has yet to be fully implemented to mainstream high-value manufacturing industries due to a number of technical challenges, all of which are directly related to ISF process parameters. This paper aims to provide a detailed review of the current state-of-the-art of ISF processes in terms of its technological capabilities and specific limitations with discussions on the ISF process parameters and their effects on ISF processes. Particular attention is given to the ISF process parameters on the formability, deformation and failure mechanics, springback and accuracy and surface roughness. This leads to a number of recommendations that are considered essential for future research effort

Flexible Automation and Intelligent Manufacturing: The Human-Data-Technology Nexus

This is an open access book. It gathers the first volume of the proceedings of the 31st edition of the International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2022, held on June 19 – 23, 2022, in Detroit, Michigan, USA. Covering four thematic areas including Manufacturing Processes, Machine Tools, Manufacturing Systems, and Enabling Technologies, it reports on advanced manufacturing processes, and innovative materials for 3D printing, applications of machine learning, artificial intelligence and mixed reality in various production sectors, as well as important issues in human-robot collaboration, including methods for improving safety. Contributions also cover strategies to improve quality control, supply chain management and training in the manufacturing industry, and methods supporting circular supply chain and sustainable manufacturing. All in all, this book provides academicians, engineers and professionals with extensive information on both scientific and industrial advances in the converging fields of manufacturing, production, and automation

Flexible Automation and Intelligent Manufacturing: The Human-Data-Technology Nexus

This is an open access book. It gathers the first volume of the proceedings of the 31st edition of the International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2022, held on June 19 – 23, 2022, in Detroit, Michigan, USA. Covering four thematic areas including Manufacturing Processes, Machine Tools, Manufacturing Systems, and Enabling Technologies, it reports on advanced manufacturing processes, and innovative materials for 3D printing, applications of machine learning, artificial intelligence and mixed reality in various production sectors, as well as important issues in human-robot collaboration, including methods for improving safety. Contributions also cover strategies to improve quality control, supply chain management and training in the manufacturing industry, and methods supporting circular supply chain and sustainable manufacturing. All in all, this book provides academicians, engineers and professionals with extensive information on both scientific and industrial advances in the converging fields of manufacturing, production, and automation

High-precision micro-machining of glass for mass-personalization

With the fourth industrial revolution manufacturing industry faces new challenges. Small batches of personalized parts, where the geometry changes per part, must be produced in an economically viable manner. In such cases of mass personalization new manufacturing technologies are required which can keep manufacturing overhead related to change of part geometries low. These processes need to address the issues of extensive calibration and tooling costs, must be able to handle complex parts and reduce production steps. According to recent studies hybrid technologies, including electrochemical technologies, are promising to address these manufacturing challenges. At the same time, glass has fascinated and attracted much interest from both the academic and industrial world, mainly because it is optically and radio frequency transparent, chemically inert, environmentally friendly and it has excellent mechanical and thermal properties, allowing tailoring of new and dedicated applications. However, glass is a hard to machine material, due to its hardness and brittleness. Machining smooth, high-aspect ratio structures is still challenging due to long machining times, high machining costs and poor surface quality. Hybrid methods like Spark Assisted Chemical Engraving (SACE) perform well to address these issues. Nevertheless, SACE cannot be deployed for high-precision glass mass-personalization by industry and academia, due to 1) lack of process models for glass cutting and milling, relating SACE input parameters to a desired output, 2) extensive calibration needed for tool-workpiece alignment and tool run-out elimination, 3) part specific tooling required for proper clamping of the glass workpiece to attain high precision. In this study, SACE technology was progressively developed from a mass-fabrication technology towards a process for mass-personalization of high-precision glass parts by addressing these issues. Key was the development of 1) an (empirically validated) model for SACE cutting and milling process operations allowing direct relation of the machining input to the desired machining outcome, enabling a dramatical increase of automation across the manufacturing process workflow from desired design to establishing of machinable code containing all necessary manufacturing execution information, 2) in-situ fabrication of the needed tooling and 3) the use of low-cost rapid prototyping, eliminating high indirect machining costs and long lead times. To show the viability of this approach two novel applications in the microtechnology field were proposed and developed using glass as substrate material and SACE technology for rapid prototyping: a) fabrication of glass imprint templates for microfabricating devices by hot embossing and b) manufacturing of glass dies for micro-forming of metal micro parts

Tekes projekti SuperMachines loppuraportti

Tutkimuksessa kerättiin best practice aineistoa ja kehitettiin internet alusta kerätyn aineiston tutkimiseen ja hakujen suorittamiseen. Aineisto löytyy internet osoitteesta: http://www.amcase.info/. Rekisteröitymällä kuka vain voi syöttää alustalle lisää aineistoa. Kappaleiden suunnitteluohjeet on julkaistu Suomen pikavalmistusyhdistyksen sivuilla: http://firpa.fi/html/am-tietoa.html. Ohjeesta löytyy mm. suositeltu minimi seinämänvahvuus, suositellun pienimmän yksityiskohdan koko, tyypillinen markkinoilta löytyvä rakennuskammin koko, sekä tyypilliset materiaalit. Valmiiden kokoonpanojen ja mekanismien suunnitteluun muodostettiin Objet 30 ja UPrint SE+ laitteelle ohjeistus josta löytyy pienin radiaalinen välys, aksiaalinen välys, sekä pienin rako riippuen rakennussuunnasta. Tutkimusprojektin aikana seurattiin alan teknologian kehitystä. Kahden vuoden aikana markkinoille ilmaantui noin. 50 uutta laitevalmistajaa, sekä noin 300 erilaista laitetta, sekä lukuisia materiaaleja. Merkittävimmät uudistukset listattiin ja pohdittiin mahdollisia kehityssuuntia. Kaikki uudet toimijat ja laitteet päivitettiin Firpan ylläpitämään tietokantaan: http://firpa.fi/html/am-tietoa.html. Markkinoilla on selvä suuntaus tuotantokomponenttien valmistamiseen, kotitulostimien hintojen laskemiseen, sekä isompien kappaleiden valmistamiseen. Muovilevy komponenttien muovaamista tutkittiin laserin ja alipaineen avulla DDShape laitteella. Laitteella onnistuttiin tekemään testikappaleita ja laitetta saatiin kehitettyä eteenpäin. Laitteiston kehittämiseksi ja kaupallistamisen tueksi Tekes on myöntänyt "Tutkimusideoista uutta tietoa ja liiketoimintaa" (TUTLI) rahoituksen. ISF mini projektissa onnistuttiin kehittämään edullinen pienten kappaleiden painomuovauskone. Samalla kartoitettiin laitteelle soveltuvat parametrit ja rajoitukset. Laseravusteisella muovaamisella päästään kuparilla isompaan seinämän kaltevuuteen ja pinnalaatu pysyy hyvänä. Teräksellä laserista ei ollut juuri hyötyä ja alumiinilla muovattavuus kyllä parani, mutta pinnalaatu huononi. AM kappaleiden viimeistelykoneistuksessa tutkittiin muovisten kappaleiden viimeistely jyrsimällä, sekä metallikappaleiden automaattista hiontaa. Jyrsinnässä vertailtiin eri menetelmillä tehtyjä kappaleita, sekä mitattiin kappaleiden mittatarkkuutta ja geometrisia toleransseja. Huonosta kotitulostimella tehdystä kappaleesta on vaikea saada hyvää kappaletta vaikka se viimeisteltäisiin koneistamalla. Suurimmat ongelmat liittyvät kappaleiden vääntymiseen johtuen lämpöjännityksistä valmistusprosessin aikana. Kappaleiden automaattisessa hionnassa parhaat tulokset saatiin DMLS kappaleille käyttämällä hionta-aineena teräshauleja ja pyörittämällä niitä hiottavat kappaleen kanssa rummussa. Ra arvo parani tällöin noin seitsemästä mikrometristä kolmeen mikrometriin