1,030 research outputs found
Performance Comparison of Dual Connectivity and Hard Handover for LTE-5G Tight Integration in mmWave Cellular Networks
MmWave communications are expected to play a major role in the Fifth
generation of mobile networks. They offer a potential multi-gigabit throughput
and an ultra-low radio latency, but at the same time suffer from high isotropic
pathloss, and a coverage area much smaller than the one of LTE macrocells. In
order to address these issues, highly directional beamforming and a very
high-density deployment of mmWave base stations were proposed. This Thesis aims
to improve the reliability and performance of the 5G network by studying its
tight and seamless integration with the current LTE cellular network. In
particular, the LTE base stations can provide a coverage layer for 5G mobile
terminals, because they operate on microWave frequencies, which are less
sensitive to blockage and have a lower pathloss. This document is a copy of the
Master's Thesis carried out by Mr. Michele Polese under the supervision of Dr.
Marco Mezzavilla and Prof. Michele Zorzi. It will propose an LTE-5G tight
integration architecture, based on mobile terminals' dual connectivity to LTE
and 5G radio access networks, and will evaluate which are the new network
procedures that will be needed to support it. Moreover, this new architecture
will be implemented in the ns-3 simulator, and a thorough simulation campaign
will be conducted in order to evaluate its performance, with respect to the
baseline of handover between LTE and 5G.Comment: Master's Thesis carried out by Mr. Michele Polese under the
supervision of Dr. Marco Mezzavilla and Prof. Michele Zorz
End-to-End Simulation of 5G mmWave Networks
Due to its potential for multi-gigabit and low latency wireless links,
millimeter wave (mmWave) technology is expected to play a central role in 5th
generation cellular systems. While there has been considerable progress in
understanding the mmWave physical layer, innovations will be required at all
layers of the protocol stack, in both the access and the core network.
Discrete-event network simulation is essential for end-to-end, cross-layer
research and development. This paper provides a tutorial on a recently
developed full-stack mmWave module integrated into the widely used open-source
ns--3 simulator. The module includes a number of detailed statistical channel
models as well as the ability to incorporate real measurements or ray-tracing
data. The Physical (PHY) and Medium Access Control (MAC) layers are modular and
highly customizable, making it easy to integrate algorithms or compare
Orthogonal Frequency Division Multiplexing (OFDM) numerologies, for example.
The module is interfaced with the core network of the ns--3 Long Term Evolution
(LTE) module for full-stack simulations of end-to-end connectivity, and
advanced architectural features, such as dual-connectivity, are also available.
To facilitate the understanding of the module, and verify its correct
functioning, we provide several examples that show the performance of the
custom mmWave stack as well as custom congestion control algorithms designed
specifically for efficient utilization of the mmWave channel.Comment: 25 pages, 16 figures, submitted to IEEE Communications Surveys and
Tutorials (revised Jan. 2018
TCP in 5G mmWave Networks: Link Level Retransmissions and MP-TCP
MmWave communications, one of the cornerstones of future 5G mobile networks,
are characterized at the same time by a potential multi-gigabit capacity and by
a very dynamic channel, sensitive to blockage, wide fluctuations in the
received signal quality, and possibly also sudden link disruption. While the
performance of physical and MAC layer schemes that address these issues has
been thoroughly investigated in the literature, the complex interactions
between mmWave links and transport layer protocols such as TCP are still
relatively unexplored. This paper uses the ns-3 mmWave module, with its channel
model based on real measurements in New York City, to analyze the performance
of the Linux TCP/IP stack (i) with and without link-layer retransmissions,
showing that they are fundamental to reach a high TCP throughput on mmWave
links and (ii) with Multipath TCP (MP-TCP) over multiple LTE and mmWave links,
illustrating which are the throughput-optimal combinations of secondary paths
and congestion control algorithms in different conditions.Comment: 6 pages, 11 figures, accepted for presentation at the 2017 IEEE
Conference on Computer Communications Workshops (INFOCOM WKSHPS
An Analytical Latency Model and Evaluation of the Capacity of 5G NR to Support V2X Services Using V2N2V Communications
5G has been designed to support applications such as connected and automated driving. To this aim, 5G includes a highly flexible New Radio (NR) interface that can be configured to utilize different subcarrier spacings (SCS), slot durations, scheduling, and retransmissions mechanisms. This flexibility can be exploited to support advanced V2X services with strict latency and reliability requirements using V2N2V (Vehicle-to-Network-to-Vehicles) communications instead of direct or sidelink V2V (Vehicle-to-Vehicle). To analyze this possibility, this paper presents a novel analytical model that estimates the latency of 5G at the radio network level. The model accounts for the use of different numerologies (SCS, slot durations and Cyclic Prefixes), modulation and coding schemes, full-slots or mini-slots, semi-static and dynamic scheduling, different retransmission mechanisms, and broadcast/multicast or unicast transmissions. The model has been used to first analyze the impact of different 5G NR radio configurations on the latency. We then identify which radio configurations and scenarios can 5G NR satisfy the latency and reliability requirements of V2X services using V2N2V communications. This paper considers cooperative lane changes as a case study. The results show that 5G can support advanced V2X services at the radio network level using V2N2V communications under certain conditions that depend on the radio configuration, bandwidth, service requirements and cell traffic load
Reliable and Low-Latency Fronthaul for Tactile Internet Applications
With the emergence of Cloud-RAN as one of the dominant architectural
solutions for next-generation mobile networks, the reliability and latency on
the fronthaul (FH) segment become critical performance metrics for applications
such as the Tactile Internet. Ensuring FH performance is further complicated by
the switch from point-to-point dedicated FH links to packet-based multi-hop FH
networks. This change is largely justified by the fact that packet-based
fronthauling allows the deployment of FH networks on the existing Ethernet
infrastructure. This paper proposes to improve reliability and latency of
packet-based fronthauling by means of multi-path diversity and erasure coding
of the MAC frames transported by the FH network. Under a probabilistic model
that assumes a single service, the average latency required to obtain reliable
FH transport and the reliability-latency trade-off are first investigated. The
analytical results are then validated and complemented by a numerical study
that accounts for the coexistence of enhanced Mobile BroadBand (eMBB) and
Ultra-Reliable Low-Latency (URLLC) services in 5G networks by comparing
orthogonal and non-orthogonal sharing of FH resources.Comment: 11pages, 13 figures, 3 bio photo
Feasibility Study of Enabling V2X Communications by LTE-Uu Radio Interface
Compared with the legacy wireless networks, the next generation of wireless
network targets at different services with divergent QoS requirements, ranging
from bandwidth consuming video service to moderate and low date rate machine
type services, and supporting as well as strict latency requirements. One
emerging new service is to exploit wireless network to improve the efficiency
of vehicular traffic and public safety. However, the stringent packet
end-to-end (E2E) latency and ultra-low transmission failure rates pose
challenging requirements on the legacy networks. In other words, the next
generation wireless network needs to support ultra-reliable low latency
communications (URLLC) involving new key performance indicators (KPIs) rather
than the conventional metric, such as cell throughput in the legacy systems. In
this paper, a feasibility study on applying today's LTE network infrastructure
and LTE-Uu air interface to provide the URLLC type of services is performed,
where the communication takes place between two traffic participants (e.g.,
vehicle-to-vehicle and vehicle-to-pedestrian). To carry out this study, an
evaluation methodology of the cellular vehicle-to-anything (V2X) communication
is proposed, where packet E2E latency and successful transmission rate are
considered as the key performance indicators (KPIs). Then, we describe the
simulation assumptions for the evaluation. Based on them, simulation results
are depicted that demonstrate the performance of the LTE network in fulfilling
new URLLC requirements. Moreover, sensitivity analysis is also conducted
regarding how to further improve system performance, in order to enable new
emerging URLLC services.Comment: Accepted by IEEE/CIC ICCC 201
- …