A framework for traffic flow survivability in wireless networks prone to multiple failures and attacks

Transmitting packets over a wireless network has always been challenging due to failures that have always occurred as a result of many types of wireless connectivity issues. These failures have caused significant outages, and the delayed discovery and diagnostic testing of these failures have exacerbated their impact on servicing, economic damage, and social elements such as technological trust. There has been research on wireless network failures, but little on multiple failures such as node-node, node-link, and link–link failures. The problem of capacity efficiency and fast recovery from multiple failures has also not received attention. This research develops a capacity efficient evolutionary swarm survivability framework, which encompasses enhanced genetic algorithm (EGA) and ant colony system (ACS) survivability models to swiftly resolve node-node, node-link, and link-link failures for improved service quality. The capacity efficient models were tested on such failures at different locations on both small and large wireless networks. The proposed models were able to generate optimal alternative paths, the bandwidth required for fast rerouting, minimized transmission delay, and ensured the rerouting path fitness and good transmission time for rerouting voice, video and multimedia messages. Increasing multiple link failures reveal that as failure increases, the bandwidth used for rerouting and transmission time also increases. This implies that, failure increases bandwidth usage which leads to transmission delay, which in turn slows down message rerouting. The suggested framework performs better than the popular Dijkstra algorithm, proactive, adaptive and reactive models, in terms of throughput, packet delivery ratio (PDR), speed of transmission, transmission delay and running time. According to the simulation results, the capacity efficient ACS has a PDR of 0.89, the Dijkstra model has a PDR of 0.86, the reactive model has a PDR of 0.83, the proactive model has a PDR of 0.83, and the adaptive model has a PDR of 0.81. Another performance evaluation was performed to compare the proposed model's running time to that of other evaluated routing models. The capacity efficient ACS model has a running time of 169.89ms on average, while the adaptive model has a running time of 1837ms and Dijkstra has a running time of 280.62ms. With these results, capacity efficient ACS outperforms other evaluated routing algorithms in terms of PDR and running time. According to the mean throughput determined to evaluate the performance of the following routing algorithms: capacity efficient EGA has a mean throughput of 621.6, Dijkstra has a mean throughput of 619.3, proactive (DSDV) has a mean throughput of 555.9, and reactive (AODV) has a mean throughput of 501.0. Since Dijkstra is more similar to proposed models in terms of performance, capacity efficient EGA was compared to Dijkstra as follows: Dijkstra has a running time of 3.8908ms and EGA has a running time of 3.6968ms. In terms of running time and mean throughput, the capacity efficient EGA also outperforms the other evaluated routing algorithms. The generated alternative paths from these investigations demonstrate that the proposed framework works well in preventing the problem of data loss in transit and ameliorating congestion issue resulting from multiple failures and server overload which manifests when the process hangs. The optimal solution paths will in turn improve business activities through quality data communications for wireless service providers.School of ComputingPh. D. (Computer Science

Formation coordination and network management of UAV networks using particle swarm optimization and software-defined networking

In recent years, with the growth in the use of Unmanned Aerial Vehicles (UAVs), UAV-based systems have become popular in both military and civil applications. The lack of reliable communication infrastructure in these scenarios has motivated the use of UAVs to establish a network as flying nodes, also known as UAV networks. However, the high mobility degree of flying and terrestrial users may be responsible for constant changes in nodes’ positioning, which makes it more challenging to guarantee their communication during the operational time. In this context, this work presents a framework solution for formation coordination and network management of UAVs, which aims to establish and maintain a set of relays units in order to provide a constant, reliable and efficient communication link among user nodes - which are performing individual or collaborative missions on its turn. Such a framework relies on a set of formation coordination algorithms - including the Particle Swarm Optimization (PSO) evolutionary algorithm -, and also considers the use of Software-defined Networking-based (SDN) communication protocol for network management. For coordination proposes, a novel particle selection criteria is proposed, which aims to guarantee network manageability of UAV formations, therefore being able to guarantee service persistence in case of nodes’ failure occurrence, as well as to provide required network performance, as a consequence. Simulations performed in OMNeT++ show the efficiency of the proposed solution and prove a promising direction of the solution for accomplishing its purposes.Em regiões de confrontos militares, em cenários pós-catástrofes naturais e, inclusive, em grandes áreas de cultivo agrícola, é comum a ausência de uma infra-estrutura préestabelecida de comunicação entre usuários durante a execução de uma ou mais operações eventuais. Nestes casos, Veículos Aéreos Não Tripulados (VANTs) podem ser vistos como uma alternativa para o estabelecimento de uma rede temporária durante essas missões. Para algumas aplicações, a alta mobilidade destes usuários podem trazem grandes desafios para o gerenciamento autônomo de uma estrutura de comunicação aérea, como a organização espacial dos nós roteadores e as políticas de encaminhamento de pacotes adotadas durante a operação. Tendo isso em vista, esse trabalho apresenta o estudo de uma solução que visa o estabelecimento e manutenção das conexões entre os usuários - nos quais executam tarefas individuais ou colaborativas -, através do uso de algoritmos de coordenação de formação - no qual inclui o algoritmo evolucionário Otimização por Enxame de Partículas -, e, também, de conceitos relacionados a Rede Definidas por Software para o gerenciamento da rede. Ainda, é proposto um novo critério de seleção das partículas do algoritmo evolucionário, visando garantir gerenciabilidade das topologias formadas e, consequentemente, a persistência do serviço em caso de falha dos nós roteadores, assim como o cumprimento de especificações desejadas para o desempenho da rede. Simulações em OMNeT++ mostraram a eficácia da proposta e sustentam o modelo proposto a fim de atingir seus objetivos

Analysis of web3 solution development principles

In the master's thesis, we researched the principles of Web3 solution development. We studied the blockchain and blockchain-related technology, development of the Web including all versions of the Web and the differences between them. We presented the popular technologies for Web3 development and the most common Web3 solutions with examples. With help of systematic literature review we explored the state-of-art technologies for Web3 solution development and proposed a full-stack for Web3. In the final part we implemented a proof-of-concept Ethereum decentralized application and compared it with equivalent concept of Web2 application. We proposed future work of researching other popular blockchain protocols like Solana or Polygon

Production Engineering and Management

The annual International Conference on Production Engineering and Management takes place for the sixth time his year, and can therefore be considered a well - established event that is the result of the joint effort of the OWL University of Applied Sciences and the University of Trieste. The conference has been established as an annual meeting under the Double Degree Master Program ‘Production Engineering and Management’ by the two partner universities. The main goal of the conference is to provide an opportunity for students, researchers and professionals from Germany, Italy and abroad, to meet and exchange information, discuss experiences, specific practices and technical solutions used in planning, design and management of production and service systems. In addition, the conference is a platform aimed at presenting research projects, introducing young academics to the tradition of Symposiums and promoting the exchange of ideas between the industry and the academy. Especially the contributions of successful graduates of the Double Degree Master Program ‘Production Engineering and Management’ and those of other postgraduate researchers from several European countries have been enforced. This year’s special focus is on Direct Digital Manufacturing in the context of Industry 4.0, a topic of great interest for the global industry. The concept is spreading, but the actual solutions must be presented in order to highlight the practical benefits to industry and customers. Indeed, as Henning Banthien, Secretary General of the German ‘Plattform Industrie 4.0’ project office, has recently remarked, “Industry 4.0 requires a close alliance amongst the private sector, academia, politics and trade unions” in order to be “translated into practice and be implemented now”. PEM 2016 takes place between September 29 and 30, 2016 at the OWL University of Applied Sciences in Lemgo. The program is defined by the Organizing and Scientific Committees and clustered into scientific sessions covering topics of main interest and importance to the participants of the conference. The scientific sessions deal with technical and engineering issues, as well as management topics, and include contributions by researchers from academia and industry. The extended abstracts and full papers of the contributions underwent a double - blind review process. The 24 accepted presentations are assigned, according to their subject, to one of the following sessions: ‘Direct Digital Manufacturing in the Context of Industry 4.0’, ‘Industrial Engineering and Lean Management’, ‘Management Techniques and Methodologies’, ‘Wood Processing Technologies and Furniture Production’ and ‘Innovation Techniques and Methodologies