Resource-aware scheduling for 2D/3D multi-/many-core processor-memory systems

This dissertation addresses the complexities of 2D/3D multi-/many-core processor-memory systems, focusing on two key areas: enhancing timing predictability in real-time multi-core processors and optimizing performance within thermal constraints. The integration of an increasing number of transistors into compact chip designs, while boosting computational capacity, presents challenges in resource contention and thermal management. The first part of the thesis improves timing predictability. We enhance shared cache interference analysis for set-associative caches, advancing the calculation of Worst-Case Execution Time (WCET). This development enables accurate assessment of cache interference and the effectiveness of partitioned schedulers in real-world scenarios. We introduce TCPS, a novel task and cache-aware partitioned scheduler that optimizes cache partitioning based on task-specific WCET sensitivity, leading to improved schedulability and predictability. Our research explores various cache and scheduling configurations, providing insights into their performance trade-offs. The second part focuses on thermal management in 2D/3D many-core systems. Recognizing the limitations of Dynamic Voltage and Frequency Scaling (DVFS) in S-NUCA many-core processors, we propose synchronous thread migrations as a thermal management strategy. This approach culminates in the HotPotato scheduler, which balances performance and thermal safety. We also introduce 3D-TTP, a transient temperature-aware power budgeting strategy for 3D-stacked systems, reducing the need for Dynamic Thermal Management (DTM) activation. Finally, we present 3QUTM, a novel method for 3D-stacked systems that combines core DVFS and memory bank Low Power Modes with a learning algorithm, optimizing response times within thermal limits. This research contributes significantly to enhancing performance and thermal management in advanced processor-memory systems

Efficient and Scalable Computing for Resource-Constrained Cyber-Physical Systems: A Layered Approach

With the evolution of computing and communication technology, cyber-physical systems such as self-driving cars, unmanned aerial vehicles, and mobile cognitive robots are achieving increasing levels of multifunctionality and miniaturization, enabling them to execute versatile tasks in a resource-constrained environment. Therefore, the computing systems that power these resource-constrained cyber-physical systems (RCCPSs) have to achieve high efficiency and scalability. First of all, given a fixed amount of onboard energy, these computing systems should not only be power-efficient but also exhibit sufficiently high performance to gracefully handle complex algorithms for learning-based perception and AI-driven decision-making. Meanwhile, scalability requires that the current computing system and its components can be extended both horizontally, with more resources, and vertically, with emerging advanced technology. To achieve efficient and scalable computing systems in RCCPSs, my research broadly investigates a set of techniques and solutions via a bottom-up layered approach. This layered approach leverages the characteristics of each system layer (e.g., the circuit, architecture, and operating system layers) and their interactions to discover and explore the optimal system tradeoffs among performance, efficiency, and scalability. At the circuit layer, we investigate the benefits of novel power delivery and management schemes enabled by integrated voltage regulators (IVRs). Then, between the circuit and microarchitecture/architecture layers, we present a voltage-stacked power delivery system that offers best-in-class power delivery efficiency for many-core systems. After this, using Graphics Processing Units (GPUs) as a case study, we develop a real-time resource scheduling framework at the architecture and operating system layers for heterogeneous computing platforms with guaranteed task deadlines. Finally, fast dynamic voltage and frequency scaling (DVFS) based power management across the circuit, architecture, and operating system layers is studied through a learning-based hierarchical power management strategy for multi-/many-core systems

Memory-Aware Scheduling for Fixed Priority Hard Real-Time Computing Systems

As a major component of a computing system, memory has been a key performance and power consumption bottleneck in computer system design. While processor speeds have been kept rising dramatically, the overall computing performance improvement of the entire system is limited by how fast the memory can feed instructions/data to processing units (i.e. so-called memory wall problem). The increasing transistor density and surging access demands from a rapidly growing number of processing cores also significantly elevated the power consumption of the memory system. In addition, the interference of memory access from different applications and processing cores significantly degrade the computation predictability, which is essential to ensure timing specifications in real-time system design. The recent IC technologies (such as 3D-IC technology) and emerging data-intensive real-time applications (such as Virtual Reality/Augmented Reality, Artificial Intelligence, Internet of Things) further amplify these challenges. We believe that it is not simply desirable but necessary to adopt a joint CPU/Memory resource management framework to deal with these grave challenges. In this dissertation, we focus on studying how to schedule fixed-priority hard real-time tasks with memory impacts taken into considerations. We target on the fixed-priority real-time scheduling scheme since this is one of the most commonly used strategies for practical real-time applications. Specifically, we first develop an approach that takes into consideration not only the execution time variations with cache allocations but also the task period relationship, showing a significant improvement in the feasibility of the system. We further study the problem of how to guarantee timing constraints for hard real-time systems under CPU and memory thermal constraints. We first study the problem under an architecture model with a single core and its main memory individually packaged. We develop a thermal model that can capture the thermal interaction between the processor and memory, and incorporate the periodic resource sever model into our scheduling framework to guarantee both the timing and thermal constraints. We further extend our research to the multi-core architectures with processing cores and memory devices integrated into a single 3D platform. To our best knowledge, this is the first research that can guarantee hard deadline constraints for real-time tasks under temperature constraints for both processing cores and memory devices. Extensive simulation results demonstrate that our proposed scheduling can improve significantly the feasibility of hard real-time systems under thermal constraints

Thermal and QoS-Aware Embedded Systems

While embedded systems such as smartphones and smart cars become essential parts of our lives, they face urgent thermal challenges. Extreme thermal conditions (i.e., both high and low temperatures) degrade system reliability, even risking safety; devices in the cold environments unexpectedly go offline, whereas extremely high device temperatures can cause device failures or battery explosions. These thermal limits become close to the norm because of ever-increasing chip power densities and application complexities. Embedded systems in the wild, however, lack adaptive and effective solutions to overcome such thermal challenges. An adaptive thermal management solution must cope with various runtime thermal scenarios under a changing ambient temperature. An effective solution requires the understanding of the dynamic thermal behaviors of underlying hardware and application workloads to ensure thermal and application quality-of-service (QoS) requirements. This thesis proposes a suite of adaptive and effective thermal management solutions to address different aspects of real-world thermal challenges faced by modern embedded systems. First, we present BPM, a battery-aware power management framework for mobile devices to address the unexpected device shutoffs in cold environments. We develop BPM as a background service that characterizes and controls real-time battery behaviors to maintain operable conditions even in cold environments. We then propose eTEC, building on the thermoelectric cooling solution, which adaptively controls cooling and computational power to avoid mobile devices overheating. For the real-time embedded systems such as cars, we present RT-TRM, a thermal-aware resource management framework that monitors changing ambient temperatures and allocates system resources to individual tasks. Next, we target in-vehicle vision systems running on CPUs–GPU system-on-chips and develop CPU–GPU co-scheduling to tackle thermal imbalance across CPUs caused by GPU heat. We evaluate all of these solutions using representative mobile/automotive platforms and workloads, demonstrating their effectiveness in meeting thermal and QoS requirements.PHDComputer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/153350/1/ymoonlee_1.pd

Energy Aware Runtime Systems for Elastic Stream Processing Platforms

Following an invariant growth in the required computational performance of processors, the multicore revolution started around 20 years ago. This revolution was mainly an answer to power dissipation constraints restricting the increase of clock frequency in single-core processors. The multicore revolution not only brought in the challenge of parallel programming, i.e. being able to develop software exploiting the entire capabilities of manycore architectures, but also the challenge of programming heterogeneous platforms. The question of “on which processing element to map a specific computational unit?”, is well known in the embedded community. With the introduction of general-purpose graphics processing units (GPGPUs), digital signal processors (DSPs) along with many-core processors on different system-on-chip platforms, heterogeneous parallel platforms are nowadays widespread over several domains, from consumer devices to media processing platforms for telecom operators. Finding mapping together with a suitable hardware architecture is a process called design-space exploration. This process is very challenging in heterogeneous many-core architectures, which promise to offer benefits in terms of energy efficiency. The main problem is the exponential explosion of space exploration. With the recent trend of increasing levels of heterogeneity in the chip, selecting the parameters to take into account when mapping software to hardware is still an open research topic in the embedded area. For example, the current Linux scheduler has poor performance when mapping tasks to computing elements available in hardware. The only metric considered is CPU workload, which as was shown in recent work does not match true performance demands from the applications. Doing so may produce an incorrect allocation of resources, resulting in a waste of energy. The origin of this research work comes from the observation that these approaches do not provide full support for the dynamic behavior of stream processing applications, especially if these behaviors are established only at runtime. This research will contribute to the general goal of developing energy-efficient solutions to design streaming applications on heterogeneous and parallel hardware platforms. Streaming applications are nowadays widely spread in the software domain. Their distinctive characiteristic is the retrieving of multiple streams of data and the need to process them in real time. The proposed work will develop new approaches to address the challenging problem of efficient runtime coordination of dynamic applications, focusing on energy and performance management.Efter en oföränderlig tillväxt i prestandakrav hos processorer, började den flerkärniga processor-revolutionen för ungefär 20 år sedan. Denna revolution skedde till största del som en lösning till begränsningar i energieffekten allt eftersom klockfrekvensen kontinuerligt höjdes i en-kärniga processorer. Den flerkärniga processor-revolutionen medförde inte enbart utmaningen gällande parallellprogrammering, m.a.o. förmågan att utveckla mjukvara som använder sig av alla delelement i de flerkärniga processorerna, men också utmaningen med programmering av heterogena plattformar. Frågeställningen ”på vilken processorelement skall en viss beräkning utföras?” är väl känt inom ramen för inbyggda datorsystem. Efter introduktionen av grafikprocessorer för allmänna beräkningar (GPGPU), signalprocesserings-processorer (DSP) samt flerkärniga processorer på olika system-on-chip plattformar, är heterogena parallella plattformar idag omfattande inom många domäner, från konsumtionsartiklar till mediaprocesseringsplattformar för telekommunikationsoperatörer. Processen att placera beräkningarna på en passande hårdvaruplattform kallas för utforskning av en designrymd (design-space exploration). Denna process är mycket utmanande för heterogena flerkärniga arkitekturer, och kan medföra fördelar när det gäller energieffektivitet. Det största problemet är att de olika valmöjligheterna i designrymden kan växa exponentiellt. Enligt den nuvarande trenden som förespår ökad heterogeniska aspekter i processorerna är utmaningen att hitta den mest passande placeringen av beräkningarna på hårdvaran ännu en forskningsfråga inom ramen för inbyggda datorsystem. Till exempel, den nuvarande schemaläggaren i Linux operativsystemet är inkapabel att hitta en effektiv placering av beräkningarna på den underliggande hårdvaran. Det enda mätsättet som används är processorns belastning vilket, som visats i tidigare forskning, inte motsvarar den verkliga prestandan i applikationen. Användning av detta mätsätt vid resursallokering resulterar i slöseri med energi. Denna forskning härstammar från observationerna att dessa tillvägagångssätt inte stöder det dynamiska beteendet hos ström-processeringsapplikationer (stream processing applications), speciellt om beteendena bara etableras vid körtid. Denna forskning kontribuerar till det allmänna målet att utveckla energieffektiva lösningar för ström-applikationer (streaming applications) på heterogena flerkärniga hårdvaruplattformar. Ström-applikationer är numera mycket vanliga i mjukvarudomän. Deras distinkta karaktär är inläsning av flertalet dataströmmar, och behov av att processera dem i realtid. Arbetet i denna forskning understöder utvecklingen av nya sätt för att lösa det utmanade problemet att effektivt koordinera dynamiska applikationer i realtid och fokus på energi- och prestandahantering

Mixed Criticality Systems - A Review : (13th Edition, February 2022)

This review covers research on the topic of mixed criticality systems that has been published since Vestal’s 2007 paper. It covers the period up to end of 2021. The review is organised into the following topics: introduction and motivation, models, single processor analysis (including job-based, hard and soft tasks, fixed priority and EDF scheduling, shared resources and static and synchronous scheduling), multiprocessor analysis, related topics, realistic models, formal treatments, systems issues, industrial practice and research beyond mixed-criticality. A list of PhDs awarded for research relating to mixed-criticality systems is also included

Integrating dataflow and non-dataflow real-time application models on multi-core platforms

Ferry Jules. Facultés des sciences. Rapports sur les travaux personnels des professeurs. In: Bulletin administratif de l'instruction publique. Tome 24 n°465, 1881. pp. 529-531