Online Timing Slack Measurement and its Application in Field-Programmable Gate Arrays

Reliability, power consumption and timing performance are key concerns for today's integrated circuits. Measurement techniques capable of quantifying the timing characteristics of a circuit, while it is operating, facilitate a range of benefits. Delay variation due to environmental and operational conditions, and degradation can be monitored by tracking changes in timing performance. Using the measurements in a closed-loop to control power supply voltage or clock frequency allows for the reduction of timing safety margins, leading to improvements in power consumption or throughput performance through the exploitation of better-than worst-case operation. This thesis describes a novel online timing slack measurement method which can directly measure the timing performance of a circuit, accurately and with minimal overhead. Enhancements allow for the improvement of absolute accuracy and resolution. A compilation flow is reported that can automatically instrument arbitrary circuits on FPGAs with the measurement circuitry. On its own this measurement method is able to track the "health" of an integrated circuit, from commissioning through its lifetime, warning of impending failure or instigating pre-emptive degradation mitigation techniques. The use of the measurement method in a closed-loop dynamic voltage and frequency scaling scheme has been demonstrated, achieving significant improvements in power consumption and throughput performance.Open Acces

Design and modelling of variability tolerant on-chip communication structures for future high performance system on chip designs

The incessant technology scaling has enabled the integration of functionally complex System-on-Chip (SoC) designs with a large number of heterogeneous systems on a single chip. The processing elements on these chips are integrated through on-chip communication structures which provide the infrastructure necessary for the exchange of data and control signals, while meeting the strenuous physical and design constraints. The use of vast amounts of on chip communications will be central to future designs where variability is an inherent characteristic. For this reason, in this thesis we investigate the performance and variability tolerance of typical on-chip communication structures. Understanding of the relationship between variability and communication is paramount for the designers; i.e. to devise new methods and techniques for designing performance and power efficient communication circuits in the forefront of challenges presented by deep sub-micron (DSM) technologies. The initial part of this work investigates the impact of device variability due to Random Dopant Fluctuations (RDF) on the timing characteristics of basic communication elements. The characterization data so obtained can be used to estimate the performance and failure probability of simple links through the methodology proposed in this work. For the Statistical Static Timing Analysis (SSTA) of larger circuits, a method for accurate estimation of the probability density functions of different circuit parameters is proposed. Moreover, its significance on pipelined circuits is highlighted. Power and area are one of the most important design metrics for any integrated circuit (IC) design. This thesis emphasises the consideration of communication reliability while optimizing for power and area. A methodology has been proposed for the simultaneous optimization of performance, area, power and delay variability for a repeater inserted interconnect. Similarly for multi-bit parallel links, bandwidth driven optimizations have also been performed. Power and area efficient semi-serial links, less vulnerable to delay variations than the corresponding fully parallel links are introduced. Furthermore, due to technology scaling, the coupling noise between the link lines has become an important issue. With ever decreasing supply voltages, and the corresponding reduction in noise margins, severe challenges are introduced for performing timing verification in the presence of variability. For this reason an accurate model for crosstalk noise in an interconnection as a function of time and skew is introduced in this work. This model can be used for the identification of skew condition that gives maximum delay noise, and also for efficient design verification

Algorithmic techniques for nanometer VLSI design and manufacturing closure

As Very Large Scale Integration (VLSI) technology moves to the nanoscale regime, design and manufacturing closure becomes very difficult to achieve due to increasing chip and power density. Imperfections due to process, voltage and temperature variations aggravate the problem. Uncertainty in electrical characteristic of individual device and wire may cause significant performance deviations or even functional failures. These impose tremendous challenges to the continuation of Moore's law as well as the growth of semiconductor industry. Efforts are needed in both deterministic design stage and variation-aware design stage. This research proposes various innovative algorithms to address both stages for obtaining a design with high frequency, low power and high robustness. For deterministic optimizations, new buffer insertion and gate sizing techniques are proposed. For variation-aware optimizations, new lithography-driven and post-silicon tuning-driven design techniques are proposed. For buffer insertion, a new slew buffering formulation is presented and is proved to be NP-hard. Despite this, a highly efficient algorithm which runs > 90x faster than the best alternatives is proposed. The algorithm is also extended to handle continuous buffer locations and blockages. For gate sizing, a new algorithm is proposed to handle discrete gate library in contrast to unrealistic continuous gate library assumed by most existing algorithms. Our approach is a continuous solution guided dynamic programming approach, which integrates the high solution quality of dynamic programming with the short runtime of rounding continuous solution. For lithography-driven optimization, the problem of cell placement considering manufacturability is studied. Three algorithms are proposed to handle cell flipping and relocation. They are based on dynamic programming and graph theoretic approaches, and can provide different tradeoff between variation reduction and wire- length increase. For post-silicon tuning-driven optimization, the problem of unified adaptivity optimization on logical and clock signal tuning is studied, which enables us to significantly save resources. The new algorithm is based on a novel linear programming formulation which is solved by an advanced robust linear programming technique. The continuous solution is then discretized using binary search accelerated dynamic programming, batch based optimization, and Latin Hypercube sampling based fast simulation

Doctor of Philosophy

dissertationPortable electronic devices will be limited to available energy of existing battery chemistries for the foreseeable future. However, system-on-chips (SoCs) used in these devices are under a demand to offer more functionality and increased battery life. A difficult problem in SoC design is providing energy-efficient communication between its components while maintaining the required performance. This dissertation introduces a novel energy-efficient network-on-chip (NoC) communication architecture. A NoC is used within complex SoCs due it its superior performance, energy usage, modularity, and scalability over traditional bus and point-to-point methods of connecting SoC components. This is the first academic research that combines asynchronous NoC circuits, a focus on energy-efficient design, and a software framework to customize a NoC for a particular SoC. Its key contribution is demonstrating that a simple, asynchronous NoC concept is a good match for low-power devices, and is a fruitful area for additional investigation. The proposed NoC is energy-efficient in several ways: simple switch and arbitration logic, low port radix, latch-based router buffering, a topology with the minimum number of 3-port routers, and the asynchronous advantages of zero dynamic power consumption while idle and the lack of a clock tree. The tool framework developed for this work uses novel methods to optimize the topology and router oorplan based on simulated annealing and force-directed movement. It studies link pipelining techniques that yield improved throughput in an energy-efficient manner. A simulator is automatically generated for each customized NoC, and its traffic generators use a self-similar message distribution, as opposed to Poisson, to better match application behavior. Compared to a conventional synchronous NoC, this design is superior by achieving comparable message latency with half the energy

Variation and power issues in VLSI clock networks

Clock Distribution Network (CDN) is an important component of any synchronous logic circuit. The function of CDN is to deliver the clock signal to the clock sinks. Clock skew is defined as the difference in the arrival time of the clock signal at the clock sinks. Higher uncertainty in skew (due to PVT variations) degrades circuit performance by decreasing the maximum possible delay between any two sequential elements. Aggressive frequency scaling has also led to high power consumption especially in CDN. This dissertation addresses variation and power issues in the design of current and potential future CDN. The research detailed in this work presents algorithmic techniques for the following problems: (1) Variation tolerance in useful skew design, (2) Link insertion for buffered clock nets, (3) Methodology and algorithms for rotary clocking and (4) Clock mesh optimization for skew-power trade off. For clock trees this dissertation presents techniques to integrate the different aspects of clock tree synthesis (skew scheduling, abstract topology and layout embedding) into one framework- tolerance to variations. This research addresses the issues involved in inserting cross-links in a buffered clock tree and proposes design criteria to avoid the risk of short-circuit current. Rotary clocking is a promising new clocking scheme that consists of unterminated rings formed by differential transmission lines. Rotary clocking achieves reduction in power dissipation clock skew. This dissertation addresses the issues in adopting current CAD methodology to rotary clocks. Alternative methodology and corresponding algorithmic techniques are detailed. Clock mesh is a popular form of CDN used in high performance systems. The problem of simultaneous sizing and placement of mesh buffers in a clock mesh is addressed. The algorithms presented remove the edges from the clock mesh to trade off skew tolerance for low power. For clock trees as well as link insertion, our experiments indicate significant reduction in clock skew due to variations. For clock mesh, experimental results indicate 18.5% reduction in power with 1.3% delay penalty on a average. In summary, this dissertation details methodologies/algorithms that address two critical issues- variation and power dissipation in current and potential future CDN

Layout optimization in ultra deep submicron VLSI design

As fabrication technology keeps advancing, many deep submicron (DSM) effects have become increasingly evident and can no longer be ignored in Very Large Scale Integration (VLSI) design. In this dissertation, we study several deep submicron problems (eg. coupling capacitance, antenna effect and delay variation) and propose optimization techniques to mitigate these DSM effects in the place-and-route stage of VLSI physical design. The place-and-route stage of physical design can be further divided into several steps: (1) Placement, (2) Global routing, (3) Layer assignment, (4) Track assignment, and (5) Detailed routing. Among them, layer/track assignment assigns major trunks of wire segments to specific layers/tracks in order to guide the underlying detailed router. In this dissertation, we have proposed techniques to handle coupling capacitance at the layer/track assignment stage, antenna effect at the layer assignment, and delay variation at the ECO (Engineering Change Order) placement stage, respectively. More specifically, at layer assignment, we have proposed an improved probabilistic model to quickly estimate the amount of coupling capacitance for timing optimization. Antenna effects are also handled at layer assignment through a linear-time tree partitioning algorithm. At the track assignment stage, timing is further optimized using a graph based technique. In addition, we have proposed a novel gate splitting methodology to reduce delay variation in the ECO placement considering spatial correlations. Experimental results on benchmark circuits showed the effectiveness of our approaches

High-Performance Fpaa Design For Hierarchical Implementation Of Analog And Mixed-Signal Systems

The design complexity of today's IC has increased dramatically due to the high integration allowed by advanced CMOS VLSI process. A key to manage the increased design complexity while meeting the shortening time-to-market is design automation. In digital world, the field-programmable gate arrays (FPGAs) have evolved to play a very important role by providing ASIC-compatible design methodologies that include design-for-testability, design optimization and rapid prototyping. On the analog side, the drive towards shorter design cycles has demanded the development of high performance analog circuits that are configurable and suitable for CAD methodologies. Field-programmable analog arrays (FPAAs) are intended to achieve the benefits for analog system design as FPGAs have in the digital field. Despite of the obvious advantages of hierarchical analog design, namely short time-to-market and low non-recurring engineering (NRE) costs, this approach has some apparent disadvantages. The redundant devices and routing resources for programmability requires extra chip area, while switch and interconnect parasitics cause considerable performance degradation. To deliver a high-performance FPAA, effective methodologies must be developed to minimize those adversary effects. In this dissertation, three important aspects in the FPAA design are studied to achieve that goal: the programming technology, the configurable analog block (CAB) design and the routing architecture design. Enabled by the Laser MakelinkTM technology, which provides nearly ideal programmable switches, channel segmentation algorithms are developed to improve channel routability and reduce interconnect parasitics. Segmented routing are studied and performance metrics accounting for interconnect parasitics are proposed for performance-driven analog routing. For large scale arrays, buffer insertions are considered to further reduce interconnection delay and cross-coupling noise. A high-performance, highly flexible CAB is developed to realized both continuous-mode and switched-capacitor circuits. In the end, the implementation of an 8-bit, 50MSPS pipelined A/D converter using the proposed FPAA is presented as an example of the hierarchical analog design approach, with its key performance specifications discussed

Layer assignment and routing optimization for advanced technologies

As VLSI technology scales to deep sub-micron and beyond, it becomes increasingly challenging to achieve timing closure for VLSI design. Since a complete design flow consists of several phases, such as logic synthesis, placement, and routing, interconnect synthesis plays an important role which includes buffer insertion/sizing and timing-driven routing. Although progress has been achieved by many advanced routing techniques, the following aspects can be exploited sufficiently for further improvement: (1) incremental layer assignment for timing optimization; (2) signal routing with the requirement of regularity; (3) power-efficient optical-electrical interconnect paradigm. Thus, to perform the layer assignment and routing optimization for advanced technologies, an automated routing engine in a global view is essential to benefit the interconnect design while satisfying specific requirements. This dissertation proposes a set of algorithms and methodology on layer assignment and routing optimization for advanced technologies. The research includes two timing-driven incremental layer assignment approaches, synergistic topology generation and routing synthesis for signal groups, and optical-electrical routing design for power efficiency. For incremental layer assignment, most of the conventional approaches target via minimization but neglect the timing issues. Meanwhile, via delays are ignored but should be considered in emerging technology nodes. Then two timing-driven incremental layer assignment frameworks are proposed, where all the nets are solved simultaneously with the integration of via delays: (1) optimization of the total sum of net delays and reduction of slew violations; (2) minimization of critical path timing in selected nets. For on-chip signal routing, the bundled bits in one group may have different pin locations, but they have to be routed in a regular manner by sharing common topologies. Very few previous works target inter-bit regularity via multi-layer topology selection. Furthermore, the routability and wire-length of the signal bits should also be optimized. Then an advanced synergistic routing engine is promoted, which is able to not only control routability and wire-length but also guide each bit routing intelligently for design regularity. For optical-electrical co-design routing, optical interconnect shows its advantage due to the dominance of bandwidth-distance-power properties. The previous works lack a detailed exploration of optical-electrical co-design for on-chip interconnects. During the transmission, signal quality can be affected by various loss sources and Electrical to Optical (EO)/Optical to Electrical (OE) conversion overheads should also be considered. Then a power-efficient routing flow for on-chip signals is presented, where optical connections can collaborate with electrical wires seamlessly. The effectiveness of proposed algorithms and techniques is demonstrated in this dissertation. These approaches are able to achieve the improvements regarding specific metrics and eventually benefit the routing flow.Electrical and Computer Engineerin