Applications of programmable MEMS micromirrors in laser systems

The use of optical microelectromechanical systems (MEMS) as enabling devices has been shown widely over the last decades, creating miniaturisation possibilities and added functionality for photonic systems. In the work presented in this thesis angular vertical offset comb-drive (AVC) actuated scanning micromirrors, and their use as intracavity active Q-switch elements in solid-state laser systems, are investigated. The AVC scanning micromirrors are created through a multi-user fabrication process, with theoretical and experimental investigations undertaken on the influence of the AVC initial conditions on the scanning micromirror dynamic resonant tilt movement behaviour. A novel actuator geometry is presented to experimentally investigate this influence, allowing a continuous variation of the initial AVC comb-offset angle through an integrated electrothermal actuator. The experimentally observed changes of the resonant movement with varying initial AVC offset are compared with an analytical model, simulating this varying resonant movement behaviour. In the second part of this work AVC scanning micromirrors are implemented as active intra-cavity Q-switch elements of a Nd:YAG solid-state laser system. The feasibility of achieving pulsed laser outputs with pulse durations limited by the laser cavity and not the MEMS Q-switch is shown, combined with a novel theoretical model for the Q-switch behaviour of the laser when using a bi-directional intra-cavity scanning micromirror. A detailed experimental investigation of the pulsed laser output behaviour for varying laser cavity geometries is presented, also discussing the influence of thin film coatings deposited on the mirror surfaces for further laser output power scaling. The MEMS Q-switch system is furthermore expanded using a micromirror array to create a novel Q-switched laser system with multiple individual controllable output beams using a common solid-state gain medium. Experimental results showing the simultaneous generation of two laser outputs are presented, with cavity limited pulse durations and excellent laser beam quality.The use of optical microelectromechanical systems (MEMS) as enabling devices has been shown widely over the last decades, creating miniaturisation possibilities and added functionality for photonic systems. In the work presented in this thesis angular vertical offset comb-drive (AVC) actuated scanning micromirrors, and their use as intracavity active Q-switch elements in solid-state laser systems, are investigated. The AVC scanning micromirrors are created through a multi-user fabrication process, with theoretical and experimental investigations undertaken on the influence of the AVC initial conditions on the scanning micromirror dynamic resonant tilt movement behaviour. A novel actuator geometry is presented to experimentally investigate this influence, allowing a continuous variation of the initial AVC comb-offset angle through an integrated electrothermal actuator. The experimentally observed changes of the resonant movement with varying initial AVC offset are compared with an analytical model, simulating this varying resonant movement behaviour. In the second part of this work AVC scanning micromirrors are implemented as active intra-cavity Q-switch elements of a Nd:YAG solid-state laser system. The feasibility of achieving pulsed laser outputs with pulse durations limited by the laser cavity and not the MEMS Q-switch is shown, combined with a novel theoretical model for the Q-switch behaviour of the laser when using a bi-directional intra-cavity scanning micromirror. A detailed experimental investigation of the pulsed laser output behaviour for varying laser cavity geometries is presented, also discussing the influence of thin film coatings deposited on the mirror surfaces for further laser output power scaling. The MEMS Q-switch system is furthermore expanded using a micromirror array to create a novel Q-switched laser system with multiple individual controllable output beams using a common solid-state gain medium. Experimental results showing the simultaneous generation of two laser outputs are presented, with cavity limited pulse durations and excellent laser beam quality

MEMS devices for the control of trapped atomic particles

This thesis presents the design and characterisation of novel MEMS scanners, for use in systems involving trapped atomic particles. The scanners are manufactured using multiuser silicon-on-insulator MEMS fabrication processes and use resonant piezoelectric actuation based on aluminium nitride thin films to produce one dimensional scanning at high frequencies, with resonance tuning capabilities of up to 5 kHz. Frequencies of ~100kHz and higher are required to enable for example resonant addressing of trapped atomic particles. This work demonstrates how the 200 μm and 400 μm diameter scanners can produce optical deflection angles upwards of 2° at frequencies from 80 kHz to 400 kHz. It proposes an addressing scheme based on Lissajous scanning to steer laser pulses onto 2D grids at a scale compatible with experiments involving single trapped atoms. It also examines frequency tuning capabilities of the scanners using localized on-chip Joule heating and active cooling ; frequency tuning and synchronization are shown to be critical to the implementation of 2-dimensional scanning with multiple scanners. These features are then demonstrated in a prototype implementation using fluorescing samples as a mock target to evaluate the optical performance of the scanning system. Finally, the thesis describes a proof-of-concept for integration of the scanners in a trapped atoms experiment, in which rubidium atoms trapped inside a magneto-optical trap are selectively pumped into a fluorescing state using a beam steered by the MEMS scanners.This thesis presents the design and characterisation of novel MEMS scanners, for use in systems involving trapped atomic particles. The scanners are manufactured using multiuser silicon-on-insulator MEMS fabrication processes and use resonant piezoelectric actuation based on aluminium nitride thin films to produce one dimensional scanning at high frequencies, with resonance tuning capabilities of up to 5 kHz. Frequencies of ~100kHz and higher are required to enable for example resonant addressing of trapped atomic particles. This work demonstrates how the 200 μm and 400 μm diameter scanners can produce optical deflection angles upwards of 2° at frequencies from 80 kHz to 400 kHz. It proposes an addressing scheme based on Lissajous scanning to steer laser pulses onto 2D grids at a scale compatible with experiments involving single trapped atoms. It also examines frequency tuning capabilities of the scanners using localized on-chip Joule heating and active cooling ; frequency tuning and synchronization are shown to be critical to the implementation of 2-dimensional scanning with multiple scanners. These features are then demonstrated in a prototype implementation using fluorescing samples as a mock target to evaluate the optical performance of the scanning system. Finally, the thesis describes a proof-of-concept for integration of the scanners in a trapped atoms experiment, in which rubidium atoms trapped inside a magneto-optical trap are selectively pumped into a fluorescing state using a beam steered by the MEMS scanners

Optical MEMS

Optical microelectromechanical systems (MEMS), microoptoelectromechanical systems (MOEMS), or optical microsystems are devices or systems that interact with light through actuation or sensing at a micro- or millimeter scale. Optical MEMS have had enormous commercial success in projectors, displays, and fiberoptic communications. The best-known example is Texas Instruments’ digital micromirror devices (DMDs). The development of optical MEMS was impeded seriously by the Telecom Bubble in 2000. Fortunately, DMDs grew their market size even in that economy downturn. Meanwhile, in the last one and half decade, the optical MEMS market has been slowly but steadily recovering. During this time, the major technological change was the shift of thin-film polysilicon microstructures to single-crystal–silicon microsructures. Especially in the last few years, cloud data centers are demanding large-port optical cross connects (OXCs) and autonomous driving looks for miniature LiDAR, and virtual reality/augmented reality (VR/AR) demands tiny optical scanners. This is a new wave of opportunities for optical MEMS. Furthermore, several research institutes around the world have been developing MOEMS devices for extreme applications (very fine tailoring of light beam in terms of phase, intensity, or wavelength) and/or extreme environments (vacuum, cryogenic temperatures) for many years. Accordingly, this Special Issue seeks to showcase research papers, short communications, and review articles that focus on (1) novel design, fabrication, control, and modeling of optical MEMS devices based on all kinds of actuation/sensing mechanisms; and (2) new developments of applying optical MEMS devices of any kind in consumer electronics, optical communications, industry, biology, medicine, agriculture, physics, astronomy, space, or defense

MEMS Technology for Biomedical Imaging Applications

Biomedical imaging is the key technique and process to create informative images of the human body or other organic structures for clinical purposes or medical science. Micro-electro-mechanical systems (MEMS) technology has demonstrated enormous potential in biomedical imaging applications due to its outstanding advantages of, for instance, miniaturization, high speed, higher resolution, and convenience of batch fabrication. There are many advancements and breakthroughs developing in the academic community, and there are a few challenges raised accordingly upon the designs, structures, fabrication, integration, and applications of MEMS for all kinds of biomedical imaging. This Special Issue aims to collate and showcase research papers, short commutations, perspectives, and insightful review articles from esteemed colleagues that demonstrate: (1) original works on the topic of MEMS components or devices based on various kinds of mechanisms for biomedical imaging; and (2) new developments and potentials of applying MEMS technology of any kind in biomedical imaging. The objective of this special session is to provide insightful information regarding the technological advancements for the researchers in the community

Novel Actuation Mechanisms for MEMS Mirrors

Ph.DDOCTOR OF PHILOSOPH

Building a novel nanofabrication system using MEMS

Micro-electromechanical systems (MEMS) are electrically controlled micro-machines which have been widely used in both industrial applications and scientific research. This technology allows us to use macro-machines to build micro-machines (MEMS) and then use micro-machines to fabricate even smaller structures, namely nano-structures. In this thesis, the concept of Fab on a Chip will be discussed where we construct a palette of MEMS-based micron scale tools including lithography tools, novel atomic deposition sources, atomic mass sensors, thermometers, heaters, shutters and interconnect technologies that allow us to precisely fabricate nanoscale structures and conduct in-situ measurements using these micron scale devices. Such MEMS devices form a novel microscopic nanofabrication system that can be integrated into a single silicon chip. Due to the small dimension of MEMS, fabrication specifications including heat generation, patterning resolution and film deposition precision outperform traditional fabrication in many ways. It will be shown that one gains many advantages by doing nano-lithography and physical vapor deposition at the micron scale. As an application, I will showcase the power of the technique by discussing how we use Fab on a Chip to conduct quench condensation of superconducting Pb thin films where we are able to gently place atoms upon a surface, creating a uniform, disordered amorphous film and precisely tune the superconducting properties. This shows how the new set of techniques for nanofabrication will open up an unexplored regime for the study of the physics of devices and structures with small numbers of atoms

EUROSENSORS XVII : book of abstracts

Fundação Calouste Gulbenkien (FCG).Fundação para a Ciência e a Tecnologia (FCT)

Resonant Varifocal Micromirror with Piezoresistive Focus Sensor

This paper reports a microelectromechanical systems (MEMS) resonant varifocal mirror integrated with piezoresistive focus sensor. The varifocal mirror is driven electrostatically at a resonant frequency of a mirror plate to obtain the wide scanning range of a focal length. A piezoresistor is used to monitor the focal length of the varifocal mirror. The device is made of a silicon-on-insulator (SOI) wafer and a glass wafer. A mirror plate and a counter electrode are fabricated by a top silicon layer of the SOI wafer and on the glass wafer, respectively. The piezoresistor is fabricated by ion implantation on a supporting beam of the mirror plate. The stress variation of the beam, which is detected by the piezoresistor, correspond the focal length of the varifocal mirror. The focus length varies from −41 to 35 mm at the resonant frequency of 9.5 kHz. The focal length of the varifocal mirror is monitored by the piezoresistor in real time

Resonant Varifocal Micromirror with Piezoresistive Focus Sensor

This paper reports a microelectromechanical systems (MEMS) resonant varifocal mirror integrated with piezoresistive focus sensor. The varifocal mirror is driven electrostatically at a resonant frequency of a mirror plate to obtain the wide scanning range of a focal length. A piezoresistor is used to monitor the focal length of the varifocal mirror. The device is made of a silicon-on-insulator (SOI) wafer and a glass wafer. A mirror plate and a counter electrode are fabricated by a top silicon layer of the SOI wafer and on the glass wafer, respectively. The piezoresistor is fabricated by ion implantation on a supporting beam of the mirror plate. The stress variation of the beam, which is detected by the piezoresistor, correspond the focal length of the varifocal mirror. The focus length varies from −41 to 35 mm at the resonant frequency of 9.5 kHz. The focal length of the varifocal mirror is monitored by the piezoresistor in real time