Low-Voltage High-Linearity Wideband Current Differencing Transconductance Amplifier and Its Application on Current-Mode Active Filter

A low-voltage high-linearity wideband current differencing transconductance amplifier (CDTA) is presented in this paper. The CDTA consists of a current differencing circuit and a cross-coupling transconductance circuit. The PSPICE simulations of the proposed CDTA show a good performance: -3dB frequency bandwith is about 900 MHz, low power consumption is 2.48 mW, input current linear range is ±100 µA and low current-input resistance is less than 20 Ω, high current-output resistance is more than 3 MΩ. PSpice simulations for a current-mode universal filter and a proposed high-order filter are also conducted, and the results verify the validity of the proposed CDTA

High Input Impedance Voltage-Mode Biquad Filter Using VD-DIBAs

This paper deals with a single-input multiple-output biquadratic filter providing three functions (low-pass, high-pass and band-pass) based on voltage differencing differential input buffered amplifier (VD-DIBA). The quality factor and pole frequency can be electronically tuned via the bias current. The proposed circuit uses two VD-DIBAs and two grounded capacitors without any external resistors, which is suitable to further develop into an integrated circuit. Moreover, the circuit possesses high input impedance, providing easy voltage-mode cascading. It is shown that the filter structure can be easily extended to multi-input filter without any additional components, providing also all-pass and band-reject properties. The PSPICE simulation and experimental results are included, verifying the key characteristics of the proposed filter. The given results agree well with the theoretical presumptions

Novel active function blocks and their applications in frequency filters and quadrature oscillators

Kmitočtové filtry a sinusoidní oscilátory jsou lineární elektronické obvody, které jsou používány v široké oblasti elektroniky a jsou základními stavebními bloky v analogovém zpracování signálu. V poslední dekádě pro tento účel bylo prezentováno velké množství stavebních funkčních bloků. V letech 2000 a 2006 na Ústavu telekomunikací, VUT v Brně byly definovány univerzální proudový konvejor (UCC) a univerzální napět'ový konvejor (UVC) a vyrobeny ve spolupráci s firmou AMI Semiconductor Czech, Ltd. Ovšem, stále existuje požadavek na vývoj nových aktivních prvků, které nabízejí nové výhody. Hlavní přínos práce proto spočívá v definici dalších původních aktivních stavebních bloků jako jsou differential-input buffered and transconductance amplifier (DBTA), current follower transconductance amplifier (CFTA), z-copy current-controlled current inverting transconductance amplifier (ZC-CCCITA), generalized current follower differential input transconductance amplifier (GCFDITA), voltage gain-controlled modified current-feedback operational amplifier (VGC-MCFOA), a minus-type current-controlled third-generation voltage conveyor (CC-VCIII-). Pomocí navržených aktivních stavebních bloků byly prezentovány původní zapojení fázovacích článků prvního řádu, univerzální filtry druhého řádu, ekvivalenty obvodu typu KHN, inverzní filtry, aktivní simulátory uzemněného induktoru a kvadraturní sinusoidní oscilátory pracující v proudovém, napět'ovém a smíšeném módu. Chování navržených obvodů byla ověřena simulací v prostředí SPICE a ve vybraných případech experimentálním měřením.Frequency filters and sinusoidal oscillators are linear electric circuits that are used in wide area of electronics and also are the basic building blocks in analogue signal processing. In the last decade, huge number of active building blocks (ABBs) were presented for this purpose. In 2000 and 2006, the universal current conveyor (UCC) and the universal voltage conveyor (UVC), respectively, were designed at the Department of Telecommunication, BUT, Brno, and produced in cooperation with AMI Semiconductor Czech, Ltd. There is still the need to develop new active elements that offer new advantages. The main contribution of this thesis is, therefore, the definition of other novel ABBs such as the differential-input buffered and transconductance amplifier (DBTA), the current follower transconductance amplifier (CFTA), the z-copy current-controlled current inverting transconductance amplifier (ZC-CCCITA), the generalized current follower differential input transconductance amplifier (GCFDITA), the voltage gain-controlled modified current-feedback operational amplifier (VGC-MCFOA), and the minus-type current-controlled third-generation voltage conveyor (CC-VCIII-). Using the proposed ABBs, novel structures of first-order all-pass filters, second-order universal filters, KHN-equivalent circuits, inverse filters, active grounded inductance simulators, and quadrature sinusoidal oscillators working in the current-, voltage-, or mixed-mode are presented. The behavior of the proposed circuits has been verified by SPICE simulations and in selected cases also by experimental measurements.

Realization of Resistorless Lossless Positive and Negative Grounded Inductor Simulators Using Single ZC-CCCITA

This paper is in continuation with the very recent work of Prasad et al. [14], wherein new realizations of grounded and floating positive inductor simulator using current differencing transconductance amplifier (CDTA) are reported. The focus of the paper is to provide alternate realizations of lossless, both positive and negative inductor simulators (PIS and NIS) in grounded form using z-copy current-controlled current inverting transconductance amplifier (ZC-CCCITA), which can be considered as a derivative of CDTA, wherein the current differencing unit (CDU) is reduced to a current-controlled current inverting unit. We demonstrate that only a single ZC-CCCITA and one grounded capacitor are sufficient to realize grounded lossless PIS or NIS. The proposed circuits are resistorless whose parameters can be controlled through the bias currents. The workability of the proposed PIS is validated by SPICE simulations on three RLC prototypes

Realization of Low-Voltage Modified CBTA and Design of Cascadable Current-Mode All-Pass Filter

In this paper, a low voltage modified current backward transconductance amplifier (MCBTA) and a novel first-order current-mode (CM) all-pass filter are presented. The MCBTA can operate with ±0.9 V supply voltage and the total power consumption of MCBTA is 1.27 mW. The presented all-pass filter employs single MCBTA, a grounded resistor and a grounded capacitor. The circuit possesses low input and high output impedances which make it ideal for current-mode systems. The presented all-pass filter circuit can be made electronically tunable due to the bias current of the MCBTA. Non-ideal study along with simulation results are given for validation purpose. Further, an nth-order cascadable all-pass filter is also presented. It uses n MCBTAs, n grounded resistors and n grounded capacitors. The performance of the proposed circuits is demonstrated by using PSPICE simulations based on the 0.18 µm TSMC level-7 CMOS technology parameters

Design and practice of simple first-order all-pass filters using commercially available IC and their applications

First-order all-pass filter circuits, both non-inverting and inverting, could be the focus of this article, which could include the design and implementation of first-order all-pass filter circuits. Using a standard integrated circuit (IC): AD830, as well as a single resistor and a single capacitor, the proposed first-order all-pass filters could well be built. The AD830 is an integrated circuit (IC) manufactured by Analog Devices Corporation that is available for purchase. The pole frequency and phase response of the proposed all-pass filters could well be directly modified by attuning the resistor in the circuit. Aside from that, the output voltage has a low impedance, making it appropriate for use in voltage-mode circuits. In addition, the proposed first-order all-pass filter is used to design the multiphase sinusoidal oscillator, which serves as an example of an application wherein the oscillation condition can be adjusted without impacting the frequency. The gain and phase responses of the proposed all-pass filters, as well as their phase response adjustment, time-domain response, and total harmonic distortion of signals, are all shown via computer simulation using the PSPICE software, as well as their experimental results. For the proposed circuits, a statistical analysis is coupled with a Monte Carlo simulation to estimate the performance of the circuits. In accordance with the results of this study, a theoretical design suitable for developing a worksheet for teaching and learning in electrical and electronic engineering laboratories has already been develope

New Grounded and Floating Simulated Inductance Circuits using Current Differencing Transconductance Amplifiers

Current differencing transconductance amplifier (CDTA) is receiving considerable attention as a building block for current-mode (CM) analog signal processing / signal generation. In this paper, new CDTA based lossless grounded and floating inductance simulation circuits have been proposed. The proposed grounded simulated inductance circuit employs two CDTAs and a single grounded capacitor whereas the floating simulated inductance circuit employs three CDTAs and a grounded capacitor. The circuit for grounded inductance does not require any realization conditions whereas in case of floating inductance only equality of two transconductances is needed (which can be easily maintained in practice by ensuring equal dc bias currents in the two transconductance amplifiers). Some sample results demonstrating the applications of the new simulated inductors using CMOS CDTAs have been given to confirm the workability of the new circuits

A voltage-mode first order allpass filter based on VDTA

This article presents a new voltage-mode first order allpass filter (APF) employing voltage differencing transconductance amplifier (VDTA). The advantages of the circuit are that: the circuit description is very compact, consists of merely a VDTA and a capacitor: the phase shift can be electronically adjusted by current bias: it provides the lower THD of the output signal. Without any component matching conditions, the proposed circuit is very appropriate to further develop into an integrated circuit. Moreover, the proposed APF can provide the output current with high output impedance without modification of the circuit topology. The PSpice simulation results are depicted. The given results agree well with the theoretical anticipation. The maximum power consumption is 400µW at ±1.25V power supplies