1,520 research outputs found

    Low-Power, High-Speed Transceivers for Network-on-Chip Communication

    Get PDF
    Networks on chips (NoCs) are becoming popular as they provide a solution for the interconnection problems on large integrated circuits (ICs). But even in a NoC, link-power can become unacceptably high and data rates are limited when conventional data transceivers are used. In this paper, we present a low-power, high-speed source-synchronous link transceiver which enables a factor 3.3 reduction in link power together with an 80% increase in data-rate. A low-swing capacitive pre-emphasis transmitter in combination with a double-tail sense-amplifier enable speeds in excess of 9 Gb/s over a 2 mm twisted differential interconnect, while consuming only 130 fJ/transition without the need for an additional supply. Multiple transceivers can be connected back-to-back to create a source-synchronous transceiver-chain with a wave-pipelined clock, operating with 6sigma offset reliability at 5 Gb/s

    Attack resilient GPS based timing for phasor measurement units using multi-receiver direct time estimation

    Get PDF
    Modern power distribution systems are incorporating Phasor Measurement Units (PMUs) to measure the instantaneous voltage and current phasors at different nodes in the power grid. These PMUs depend on Global Positioning Systems (GPS) for precise time and synchronization. However, GPS civil signals are vulnerable to external attacks because of its low power and unencrypted signal structure. Therefore, there is a need for the development of attack resilient GPS time transfer techniques to ensure power grid stability. To counteract these adverse effects, we propose an innovative Multi-Receiver Direct Time Estimation (MR-DTE) algorithm by utilizing the measurements from multiple GPS receivers driven by a common clock. The raw GPS signals from each receiver are processed using a robust signal processing technique known as Direct Time Estimation (DTE). DTE directly correlates the received GPS signal with the corresponding signal replica for each of the pre-generated set of clock states. The optimal set of clock candidates is then determined by maximum likelihood estimation. We further leverage the known geographical diversity of multiple receivers and apply Kalman Filter to obtain robust GPS timing. We evaluate the improved robustness of our MR-DTE algorithm against external timing attacks based on GPS field experiments. In addition, we design a verification and validation power grid testbed using Real-Time Digital Simulator (RTDS) to demonstrate the impact of jamming, meaconing (i.e., record-andreplay attack) and satellite data-level anomalies on PMUs. Later, we utilize our power grid testbed to validate the attack-resilience of our proposed MR-DTE algorithm in comparison to the existing techniques such as traditional scalar tracking and Position-Information-Aided Vector Tracking

    Co-design of Security Aware Power System Distribution Architecture as Cyber Physical System

    Get PDF
    The modern smart grid would involve deep integration between measurement nodes, communication systems, artificial intelligence, power electronics and distributed resources. On one hand, this type of integration can dramatically improve the grid performance and efficiency, but on the other, it can also introduce new types of vulnerabilities to the grid. To obtain the best performance, while minimizing the risk of vulnerabilities, the physical power system must be designed as a security aware system. In this dissertation, an interoperability and communication framework for microgrid control and Cyber Physical system enhancements is designed and implemented taking into account cyber and physical security aspects. The proposed data-centric interoperability layer provides a common data bus and a resilient control network for seamless integration of distributed energy resources. In addition, a synchronized measurement network and advanced metering infrastructure were developed to provide real-time monitoring for active distribution networks. A hybrid hardware/software testbed environment was developed to represent the smart grid as a cyber-physical system through hardware and software in the loop simulation methods. In addition it provides a flexible interface for remote integration and experimentation of attack scenarios. The work in this dissertation utilizes communication technologies to enhance the performance of the DC microgrids and distribution networks by extending the application of the GPS synchronization to the DC Networks. GPS synchronization allows the operation of distributed DC-DC converters as an interleaved converters system. Along with the GPS synchronization, carrier extraction synchronization technique was developed to improve the system’s security and reliability in the case of GPS signal spoofing or jamming. To improve the integration of the microgrid with the utility system, new synchronization and islanding detection algorithms were developed. The developed algorithms overcome the problem of SCADA and PMU based islanding detection methods such as communication failure and frequency stability. In addition, a real-time energy management system with online optimization was developed to manage the energy resources within the microgrid. The security and privacy were also addressed in both the cyber and physical levels. For the physical design, two techniques were developed to address the physical privacy issues by changing the current and electromagnetic signature. For the cyber level, a security mechanism for IEC 61850 GOOSE messages was developed to address the security shortcomings in the standard

    GNSS Related Threats to Power Grid Applications

    Get PDF
    As power grid environments are moving towards the smart grid vision of the future, the traditional schemes for power grid protection and control are making way for new applications. The advancements in this field have made the requirements for power grid’s time synchronization accuracy and precision considerably more demanding. So far, the signals provided by Global Navigation Satellite Systems have generally addressed the need for highly accurate and stable reference time in power grid applications. These signals however are highly susceptible to tampering as they are being transmitted. Since electrical power transmission and distribution are critical functions for any modern society, the risks and impacts affiliated with satellite-based time synchronization in power grids ought to be examined. This thesis aims to address the matter. The objective is to examine how Global Navigation Satellite Systems are utilized in the power grids, how different attacks would potentially be carried out by employing interference and disturbance to GNSS signals and receivers and how the potential threats can be mitigated. A major part of the research is done through literature review, and the core concepts and different implementations of Global Navigation Satellite Systems are firstly introduced. The literature review also involves the introduction of different power grid components and subsystems, that utilize Global Positioning System for time synchronization. Threat modeling techniques traditionally practiced in software development are applied to power grid components and subsystems to gain insight about the possible threats and their impacts. The threats recognized through this process are evaluated and potential techniques for mitigating the most notable threats are presented.Sähköverkot ovat siirtymässä kohti tulevaisuuden älykkäitä sähköverkkoja ja perinteiset sähköverkon suojaus- ja ohjausmenetelmät tekevät tilaa uusille sovelluksille. Alan kehitys on tehnyt aikasynkronoinnin tarkkuusvaatimuksista huomattavasti aikaisempaa vaativampia. Tarkka aikareferenssi sähköverkoissa on tähän saakka saavutettu satelliittinavigointijärjestelmien tarjoamien signaalien avulla. Nämä signaalit ovat kuitenkin erittäin alttiita erilaisille hyökkäyksille. Sähkönjakelujärjestelmät ovat kriittinen osa nykyaikaista yhteiskuntaa ja riskejä sekä seuraamuksia, jotka liittyvät satelliittipohjaisten aikasynkronointimenetelmien hyödyntämiseen sähköverkoissa, tulisi tarkastella. Tämä tutkielma pyrkii vastaamaan tähän tarpeeseen. Päämääränä on selvittää, miten satelliittinavigointijärjestelmiä hyödynnetään sähköverkoissa, kuinka erilaisia hyökkäyksiä voidaan toteuttaa satelliittisignaaleja häiritsemällä ja satelliittisignaalivastaanottimia harhauttamalla ja kuinka näiden muodostamia uhkia voidaan lieventää. Valtaosa tästä tutkimuksesta on toteutettu kirjallisuuskatselmoinnin pohjalta. Työ kattaa satelliittinavigointijärjestelmien perusteet ja esittelee erilaisia tapoja, kuinka satelliittisignaaleja hyödynnetään sähköverkoissa erityisesti aikasynkronoinnin näkökulmasta. Työssä hyödynnettiin perinteisesti ohjelmistokehityksessä käytettyjä uhkamallinnusmenetelmiä mahdollisten uhkien ja seurausten analysointiin. Lopputuloksena esitellään riskiarviot uhkamallinnuksen pohjalta tunnistetuista uhkista, sekä esitellään erilaisia menettelytapoja uhkien lieventämiseksi
    corecore