Runtime Management of Multiprocessor Systems for Fault Tolerance, Energy Efficiency and Load Balancing

Efficiency of modern multiprocessor systems is hurt by unpredictable events: aging causes permanent faults that disable components; application spawnings and terminations taking place at arbitrary times, affect energy proportionality, causing energy waste; load imbalances reduce resource utilization, penalizing performance. This thesis demonstrates how runtime management can mitigate the negative effects of unpredictable events, making decisions guided by a combination of static information known in advance and parameters that only become known at runtime. We propose techniques for three different objectives: graceful degradation of aging-prone systems; energy efficiency of heterogeneous adaptive systems; and load balancing by means of work stealing. Managing aging-prone systems for graceful efficiency degradation, is based on a high-level system description that encapsulates hardware reconfigurability and workload flexibility and allows to quantify system efficiency and use it as an objective function. Different custom heuristics, as well as simulated annealing and a genetic algorithm are proposed to optimize this objective function as a response to component failures. Custom heuristics are one to two orders of magnitude faster, provide better efficiency for the first 20% of system lifetime and are less than 13% worse than a genetic algorithm at the end of this lifetime. Custom heuristics occasionally fail to satisfy reconfiguration cost constraints. As all algorithms\u27 execution time scales well with respect to system size, a genetic algorithm can be used as backup in these cases. Managing heterogeneous multiprocessors capable of Dynamic Voltage and Frequency Scaling is based on a model that accurately predicts performance and power: performance is predicted by combining static, application-specific profiling information and dynamic, runtime performance monitoring data; power is predicted using the aforementioned performance estimations and a set of platform-specific, static parameters, determined only once and used for every application mix. Three runtime heuristics are proposed, that make use of this model to perform partial search of the configuration space, evaluating a small set of configurations and selecting the best one. When best-effort performance is adequate, the proposed approach achieves 3% higher energy efficiency compared to the powersave governor and 2x better compared to the interactive and ondemand governors. When individual applications\u27 performance requirements are considered, the proposed approach is able to satisfy them, giving away 18% of system\u27s energy efficiency compared to the powersave, which however misses the performance targets by 23%; at the same time, the proposed approach maintains an efficiency advantage of about 55% compared to the other governors, which also satisfy the requirements. Lastly, to improve load balancing of multiprocessors, a partial and approximate view of the current load distribution among system cores is proposed, which consists of lightweight data structures and is maintained by each core through cheap operations. A runtime algorithm is developed, using this view whenever a core becomes idle, to perform victim core selection for work stealing, also considering system topology and memory hierarchy. Among 12 diverse imbalanced workloads, the proposed approach achieves better performance than random, hierarchical and local stealing for six workloads. Furthermore, it is at most 8% slower among the other six workloads, while competing strategies incur a penalty of at least 89% on some workload

A Holistic Solution for Reliability of 3D Parallel Systems

As device scaling slows down, emerging technologies such as 3D integration and carbon nanotube field-effect transistors are among the most promising solutions to increase device density and performance. These emerging technologies offer shorter interconnects, higher performance, and lower power. However, higher levels of operating temperatures and current densities project significantly higher failure rates. Moreover, due to the infancy of the manufacturing process, high variation, and defect densities, chip designers are not encouraged to consider these emerging technologies as a stand-alone replacement for Silicon-based transistors. The goal of this dissertation is to introduce new architectural and circuit techniques that can work around high-fault rates in the emerging 3D technologies, improving performance and reliability comparable to Silicon. We propose a new holistic approach to the reliability problem that addresses the necessary aspects of an effective solution such as detection, diagnosis, repair, and prevention synergically for a practical solution. By leveraging 3D fabric layouts, it proposes the underlying architecture to efficiently repair the system in the presence of faults. This thesis presents a fault detection scheme by re-executing instructions on idle identical units that distinguishes between transient and permanent faults while localizing it to the granularity of a pipeline stage. Furthermore, with the use of a dynamic and adaptive reconfiguration policy based on activity factors and temperature variation, we propose a framework that delivers a significant improvement in lifetime management to prevent faults due to aging. Finally, a design framework that can be used for large-scale chip production while mitigating yield and variation failures to bring up Carbon Nano Tube-based technology is presented. The proposed framework is capable of efficiently supporting high-variation technologies by providing protection against manufacturing defects at different granularities: module and pipeline-stage levels.PHDComputer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/168118/1/javadb_1.pd

Design and Validation of Network-on-Chip Architectures for the Next Generation of Multi-synchronous, Reliable, and Reconfigurable Embedded Systems

NETWORK-ON-CHIP (NoC) design is today at a crossroad. On one hand, the design principles to efficiently implement interconnection networks in the resource-constrained on-chip setting have stabilized. On the other hand, the requirements on embedded system design are far from stabilizing. Embedded systems are composed by assembling together heterogeneous components featuring differentiated operating speeds and ad-hoc counter measures must be adopted to bridge frequency domains. Moreover, an unmistakable trend toward enhanced reconfigurability is clearly underway due to the increasing complexity of applications. At the same time, the technology effect is manyfold since it provides unprecedented levels of system integration but it also brings new severe constraints to the forefront: power budget restrictions, overheating concerns, circuit delay and power variability, permanent fault, increased probability of transient faults. Supporting different degrees of reconfigurability and flexibility in the parallel hardware platform cannot be however achieved with the incremental evolution of current design techniques, but requires a disruptive approach and a major increase in complexity. In addition, new reliability challenges cannot be solved by using traditional fault tolerance techniques alone but the reliability approach must be also part of the overall reconfiguration methodology. In this thesis we take on the challenge of engineering a NoC architectures for the next generation systems and we provide design methods able to overcome the conventional way of implementing multi-synchronous, reliable and reconfigurable NoC. Our analysis is not only limited to research novel approaches to the specific challenges of the NoC architecture but we also co-design the solutions in a single integrated framework. Interdependencies between different NoC features are detected ahead of time and we finally avoid the engineering of highly optimized solutions to specific problems that however coexist inefficiently together in the final NoC architecture. To conclude, a silicon implementation by means of a testchip tape-out and a prototype on a FPGA board validate the feasibility and effectivenes

Exploration and Design of Power-Efficient Networked Many-Core Systems

Multiprocessing is a promising solution to meet the requirements of near future applications. To get full benefit from parallel processing, a manycore system needs efficient, on-chip communication architecture. Networkon- Chip (NoC) is a general purpose communication concept that offers highthroughput, reduced power consumption, and keeps complexity in check by a regular composition of basic building blocks. This thesis presents power efficient communication approaches for networked many-core systems. We address a range of issues being important for designing power-efficient manycore systems at two different levels: the network-level and the router-level. From the network-level point of view, exploiting state-of-the-art concepts such as Globally Asynchronous Locally Synchronous (GALS), Voltage/ Frequency Island (VFI), and 3D Networks-on-Chip approaches may be a solution to the excessive power consumption demanded by today’s and future many-core systems. To this end, a low-cost 3D NoC architecture, based on high-speed GALS-based vertical channels, is proposed to mitigate high peak temperatures, power densities, and area footprints of vertical interconnects in 3D ICs. To further exploit the beneficial feature of a negligible inter-layer distance of 3D ICs, we propose a novel hybridization scheme for inter-layer communication. In addition, an efficient adaptive routing algorithm is presented which enables congestion-aware and reliable communication for the hybridized NoC architecture. An integrated monitoring and management platform on top of this architecture is also developed in order to implement more scalable power optimization techniques. From the router-level perspective, four design styles for implementing power-efficient reconfigurable interfaces in VFI-based NoC systems are proposed. To enhance the utilization of virtual channel buffers and to manage their power consumption, a partial virtual channel sharing method for NoC routers is devised and implemented. Extensive experiments with synthetic and real benchmarks show significant power savings and mitigated hotspots with similar performance compared to latest NoC architectures. The thesis concludes that careful codesigned elements from different network levels enable considerable power savings for many-core systems.Siirretty Doriast

Hierarchical Agent-based Adaptation for Self-Aware Embedded Computing Systems

Siirretty Doriast

Evaluation of the parallel computational capabilities of embedded platforms for critical systems

Modern critical systems need higher performance which cannot be delivered by the simple architectures used so far. Latest embedded architectures feature multi-cores and GPUs, which can be used to satisfy this need. In this thesis we parallelise relevant applications from multiple critical domains represented in the GPU4S benchmark suite, and perform a comparison of the parallel capabilities of candidate platforms for use in critical systems. In particular, we port the open source GPU4S Bench benchmarking suite in the OpenMP programming model, and we benchmark the candidate embedded heterogeneous multi-core platforms of the H2020 UP2DATE project, NVIDIA TX2, NVIDIA Xavier and Xilinx Zynq Ultrascale+, in order to drive the selection of the research platform which will be used in the next phases of the project. Our result indicate that in terms of CPU and GPU performance, the NVIDIA Xavier is the highest performing platform

Variation-Tolerant and Voltage-Scalable Integrated Circuits Design

Ultra-low-voltage (ULV) operation where the supply voltage of the digital computing hardware is scaled down to the level near or below transistor threshold voltage (e.g. 300-500mV) is a key technique to achieve high computing energy efficiency. It has enabled many new exciting applications in the field of Internet of Things (IoT) devices and energy-constrained applications such as medical implants, environment sensors, and micro-robots. Ultra-low-voltage (ULV) operation is also commonly used with the emerging architectures that are often non Von-Neumann style to empower energy-efficient cognitive computing. One the biggest challenge in realizing ULV design is the large circuit delay variability. To guarantee functionality in the worst-case process, voltage, and temperature (PVT) condition, the traditional safety margin approach requires operating at a slower clock frequency or higher supply voltage which significantly limits the achievable energy efficiency of the hardware. To fully claim the energy efficiency of ULV, the large circuit delay variation needs to be adaptively handled. However, the existing adaptive techniques that are optimized for nominal supply voltage operation and traditional Von-Neumann architectures become inefficient for ULV designs and emerging architectures. This thesis presents adaptive techniques based on timing error detection and correction (EDAC) that are more suitable for the energy-constrained ULV designs and the emerging architectures. The proposed techniques are demonstrated in three test chips: (1) R-Processor: A 0.4V resilient processor with a voltage-scalable and low-overhead in-situ EDAC technique. It achieves 38% energy efficiency improvement or 2.3X throughput improvement as compared to the traditional safety margin approach. (2) A 450mV timing-margin-free waveform sorter for brain computer interface (BCI) microsystem. It achieves 49.3% higher energy efficiency and 35.6% higher throughput than the traditional safety margin approach. (3) Ultra-low-power and robust power-management system which consists of a microprocessor employing ULV EDAC, 63-ratio integrated switched-capacitor DC-DC converter, and a fully-digital error based regulation controller. In this thesis, we also explore circuits for emerging techniques. The first is temperature sensors for dynamic-thermal-management (DTM). The modern high-performance microprocessors suffer from ever-increasing power densities which has led to reliability concerns and increased cooling costs from excessive heat. In order to monitor and manage the thermal behavior, DTM techniques embed multiple temperature sensors and use its information. The size, accuracy, and voltage-scalability of the sensor are critical for the performance of DTM. Therefore, we propose a temperature sensor that directly senses transistor threshold voltage and the test chip demonstrates 9X smaller area, 3X higher accuracy, and 200mV lower voltage scalability (down to 400mV) than the previous state-of-art. Another area of exploration is interconnect design for ultra-dynamic-voltage-scaling (UDVS) systems. UDVS has been proposed for applications that require both high performance and high energy efficiency. UDVS can provide peak performance with nominal supply voltage when work load is high. When work load is moderate or low, UDVS systems can switch to ULV operation for higher energy efficiency. One of the critical challenges for developing UDVS systems is the inflexibility in various circuit fabrics that are often optimized for a single supply voltage. One critical example is conventional repeater based long interconnects which suffers from non-optimal performance and energy efficiency in UDVS systems. Therefore, in this thesis, we propose a reconfigurable interconnect design based on regenerators and demonstrate near optimal performance and energy efficiency across the supply voltage of 0.3V and 1V

Characterization and management of voltage noise in multi-core, multi-threaded processors

textReliability is one of the important issues of recent microprocessor design. Processors must provide correct behavior as users expect, and must not fail at any time. However, unreliable operation can be caused by excessive supply voltage fluctuations due to an inductive part in a microprocessor power distribution network. This voltage fluctuation issue is referred to as inductive or di/dt noise, and requires thorough analysis and sophisticated design solutions. This dissertation proposes an automated stressmark generation framework to characterize di/dt noise effect, and suggests a practical solution for management of di/dt effects while achieving performance and energy goals. First, the di/dt noise issue is analyzed from theory to a practical view. Inductance is a parasitic part in power distribution network for microprocessor, and its characteristics such as resonant frequencies are reviewed. Then, it is shown that supply voltage fluctuation from resonant behavior is much harmful than single event voltage fluctuations. Voltage fluctuations caused by standard benchmarks such as SPEC CPU2006, PARSEC, Linpack, etc. are studied. Next, an AUtomated DI/dT stressmark generation framework, referred to as AUDIT, is proposed to identify maximum voltage droop in a microprocessor power distribution network. The di/dt stressmark generated from AUDIT framework is an instruction sequence, which draws periodic high and low current pulses that maximize voltage fluctuations including voltage droops. AUDIT uses a Genetic Algorithm in scheduling and optimizing candidate instruction sequences to create a maximum voltage droop. In addition, AUDIT provides with both simulation and hardware measurement methods for finding maximum voltage droops in different design and verification stages of a processor. Failure points in hardware due to voltage droops are analyzed. Finally, a hardware technique, floating-point (FP) issue throttling, is examined, which provides a reduction in worst case voltage droop. This dissertation shows the impact of floating point throttling on voltage droop, and translates this reduction in voltage droop to an increase in operating frequency because additional guardband is no longer required to guard against droops resulting from heavy floating point usage. This dissertation presents two techniques to dynamically determine when to tradeoff FP throughput for reduced voltage margin and increased frequency. These techniques can work in software level without any modification of existing hardware.Electrical and Computer Engineerin

FDSOI Design using Automated Standard-Cell-Grained Body Biasing

With the introduction of FDSOI processes at competitive technology nodes, body biasing on an unprecedented scale was made possible. Body biasing influences one of the central transistor characteristics, the threshold voltage. By being able to heighten or lower threshold voltage by more than 100mV, the very physics of transistor switching can be manipulated at run time. Furthermore, as body biasing does not lead to different signal levels, it can be applied much more fine-grained than, e.g., DVFS. With the state of the art mainly focused on combinations of body biasing with DVFS, it has thus ignored granularities unfeasible for DVFS. This thesis fills this gap by proposing body bias domain partitioning techniques and for body bias domain partitionings thereby generated, algorithms that search for body bias assignments. Several different granularities ranging from entire cores to small groups of standard cells were examined using two principal approaches: Designer aided pre-partitioning based determination of body bias domains and a first-time, fully automatized, netlist based approach called domain candidate exploration. Both approaches operate along the lines of activation and timing of standard cell groups. These approaches were evaluated using the example of a Dynamically Reconfigurable Processor (DRP), a highly efficient category of reconfigurable architectures which consists of an array of processing elements and thus offers many opportunities for generalization towards many-core architectures. Finally, the proposed methods were validated by manufacturing a test-chip. Extensive simulation runs as well as the test-chip evaluation showed the validity of the proposed methods and indicated substantial improvements in energy efficiency compared to the state of the art. These improvements were accomplished by the fine-grained partitioning of the DRP design. This method allowed reducing dynamic power through supply voltage levels yielding higher clock frequencies using forward body biasing, while simultaneously reducing static power consumption in unused parts.Die Einführung von FDSOI Prozessen in gegenwärtigen Prozessgrößen ermöglichte die Nutzung von Substratvorspannung in nie zuvor dagewesenem Umfang. Substratvorspannung beeinflusst unter anderem eine zentrale Eigenschaft von Transistoren, die Schwellspannung. Mittels Substratvorspannung kann diese um mehr als 100mV erhöht oder gesenkt werden, was es ermöglicht, die schiere Physik des Schaltvorgangs zu manipulieren. Da weiterhin hiervon der Signalpegel der digitalen Signale unberührt bleibt, kann diese Technik auch in feineren Granularitäten angewendet werden, als z.B. Dynamische Spannungs- und Frequenz Anpassung (Engl. Dynamic Voltage and Frequency Scaling, Abk. DVFS). Da jedoch der Stand der Technik Substratvorspannung hauptsächlich in Kombinationen mit DVFS anwendet, werden feinere Granularitäten, welche für DVFS nicht mehr wirtschaftlich realisierbar sind, nicht berücksichtigt. Die vorliegende Arbeit schließt diese Lücke, indem sie Partitionierungsalgorithmen zur Unterteilung eines Entwurfs in Substratvorspannungsdomänen vorschlägt und für diese hierdurch unterteilten Domänen entsprechende Substratvorspannungen berechnet. Hierzu wurden verschiedene Granularitäten berücksichtigt, von ganzen Prozessorkernen bis hin zu kleinen Gruppen von Standardzellen. Diese Entwürfe wurden dann mit zwei verschiedenen Herangehensweisen unterteilt: Chipdesigner unterstützte, vorpartitionierungsbasierte Bestimmung von Substratvorspannungsdomänen, sowie ein erstmals vollautomatisierter, Netzlisten basierter Ansatz, in dieser Arbeit Domänen Kandidaten Exploration genannt. Beide Ansätze funktionieren nach dem Prinzip der Aktivierung, d.h. zu welchem Zeitpunkt welcher Teil des Entwurfs aktiv ist, sowie der Signallaufzeit durch die entsprechenden Entwurfsteile. Diese Ansätze wurden anhand des Beispiels Dynamisch Rekonfigurierbarer Prozessoren (DRP) evaluiert. DRPs stellen eine Klasse hocheffizienter rekonfigurierbarer Architekturen dar, welche hauptsächlich aus einem Feld von Rechenelementen besteht und dadurch auch zahlreiche Möglichkeiten zur Verallgemeinerung hinsichtlich Many-Core Architekturen zulässt. Schließlich wurden die vorgeschlagenen Methoden in einem Testchip validiert. Alle ermittelten Ergebnisse zeigen im Vergleich zum Stand der Technik drastische Verbesserungen der Energieeffizienz, welche durch die feingranulare Unterteilung in Substratvorspannungsdomänen erzielt wurde. Hierdurch konnten durch die Anwendung von Substratvorspannung höhere Taktfrequenzen bei gleicher Versorgungsspannung erzielt werden, während zeitgleich in zeitlich unkritischen oder ungenutzten Entwurfsteilen die statische Leistungsaufnahme minimiert wurde

GPU PERFORMANCE MODELLING AND OPTIMIZATION

Ph.DNUS-TU/E JOINT PH.D