Harmonic Compensation of Distribution generation Using Photovoltaic Interfacing Inverter

Normally increasing utilization of electronic devices in homes leads the researchers to concentrate on harmonic problem Besides the degrading power quality, the harmonic current flow may interfere with the adjacent telephone lines. The harmonics in a residential system is difficult because of the dispersed nature of the residential loads. This worktried to improve the power quality using distributed generation system in residential areas. To compensate a harmonics resonance in residential areas, active and passive filters are used in distribution network. To improve the distribution generation (DG) using photovoltaic interface inverter the harmonics was compensated

Performance Analysis of Photovoltaic Fed Distributed Static Compensator for Power Quality Improvement

Owing to rising demand for electricity, shortage of fossil fuels, reliability issues, high transmission and distribution losses, presently many countries are looking forward to integrate the renewable energy sources into existing electricity grid. This kind of distributed generation provides power at a location close to the residential or commercial consumers with low transmission and distribution costs. Among other micro sources, solar photovoltaic (PV) systems are penetrating rapidly due to its ability to provide necessary dc voltage and decreasing capital cost. On the other hand, the distribution systems are confronting serious power quality issues because of various nonlinear loads and impromptu expansion. The power quality issues incorporate harmonic currents, high reactive power burden, and load unbalance and so on. The custom power device widely used to improve these power quality issues is the distributed static compensator (DSTATCOM). For continuous and effective compensation of power quality issues in a grid connected solar photovoltaic distribution system, the solar inverters are designed to operate as a DSTATCOM thus by increasing the efficiency and reducing the cost of the system. The solar inverters are interfaced with grid through an L-type or LCL-type ac passive filters. Due to the voltage drop across these passive filters a high amount of voltage is maintained across the dc-link of the solar inverter so that the power can flow from PV source to grid and an effective compensation can be achieved. So in the thesis a new topology has been proposed for PV-DSTATCOM to reduce the dc-link voltage which inherently reduces the cost and rating of the solar inverter. The new LCLC-type PV-DSTATCOM is implemented both in simulation and hardware for extensive study. From the obtained results, the LCLC-type PV-DSTATCOM found to be more effective than L-type and LCL-type PV-DSTATCOM. Selection of proper reference compensation current extraction scheme plays the most crucial role in DSTATCOM performance. This thesis describes three time-domain schemes viz. Instantaneous active and reactive power (p-q), modified p-q, and IcosΦ schemes. The objective is to bring down the source current THD below 5%, to satisfy the IEEE-519 Standard recommendations on harmonic limits. Comparative evaluation shows that, IcosΦ scheme is the best PV-DSTATCOM control scheme irrespective of supply and load conditions. In the view of the fact that the filtering parameters of the PV-DSTATCOM and gains of the PI controller are designed using a linearized mathematical model of the system. Such a design may not yield satisfactory results under changing operating conditions due to the complex, nonlinear and time-varying nature of power system networks. To overcome this, evolutionary algorithms have been adopted and an algorithm-specific control parameter independent optimization tool (JAYA) is proposed. The JAYA optimization algorithm overcomes the drawbacks of both grenade explosion method (GEM) and teaching learning based optimization (TLBO), and accelerate the convergence of optimization problem. Extensive simulation studies and real-time investigations are performed for comparative assessment of proposed implementation of GEM, TLBO and JAYA optimization on PV-DSTATCOM. This validates that, the PV-DSTATCOM employing JAYA offers superior harmonic compensation compared to other alternatives, by lowering down the source current THD to drastically small values. Another indispensable aspect of PV-DSTATCOM is that due to parameter variation and nonlinearity present in the system, the reference current generated by the reference compensation current extraction scheme get altered for a changing operating conditions. So a sliding mode controller (SMC) based p-q theory is proposed in the dissertation to reduce these effects. To validate the efficacy of the implemented sliding mode controller for the power quality improvement, the performance of the proposed system with both linear and non-linear controller are observed and compared by taking total harmonic distortion as performance index. From the obtained simulation and experimentation results it is concluded that the SMC based LCLC-type PV-DSTATCOM performs better in all critical operating conditions

Assessing and Mitigating Impacts of Electric Vehicles on Active Distribution Systems

The transportation sector is expected to undergo a worldwide shift to zero-carbon emission automobiles. Major research advancements and government policies have been addressing the financial and technical barriers to electric vehicle (EV) use. Battery packs constitute an important component of EV technology. Improvements in battery pack technology are leading to lower battery cost, higher battery density, and increased driving range, making EVs more appealing to the consumers. On the other hand, EV charging loads can cause power quality issues such as harmonic distortion, voltage drop, power unbalance, power losses and transformer aging. EV increased charging load is urging the need of assessing its negative impacts on the grid to protect power system components. A comparison of the impacts of different levels of EV charging on the grid can allow EV users and utilities to understand the risks associated with their choices. Harmonic distortion due to nonlinear devices can be evaluated using harmonic power flow methods. Decoupled harmonic power flow technique is widely used in power systems analysis due to its simplicity and computational efficiency. Mitigation techniques to reduce harmonic impacts on the grid are crucial for power system reliability and maintenance. Incorporating distributed generation (DG) units into the network can achieve harmonic compensation of EV charging. A genetic algorithm is proposed to determine the current harmonic spectrum of each DG unit, accomplishing an optimal harmonic compensation of EV charging. DG integration improves grid power quality and voltage profile. It also helps in reducing voltage and current disturbances produced by EV loads

Grid integration of renewable power generation

This thesis considers the use of three-phase voltage and current source inverters as interfacing units for renewable power, specifically photovoltaic (PV) into the ac grid. This thesis presented two modulation strategies that offer the possibility of operating PV inverters in grid and islanding modes, with reduced switching losses. The first modulation strategy is for the voltage source inverter (VSI), and exploits 3rd harmonic injection with selective harmonic elimination (SHE) to improve performance at low and high modulation indices, where the traditional SHE implementation experiences difficulties due to pulse dropping. The simulations and experimentation presented show that the proposed SHE allows grid PV inverters to be operated with less than a 1kHz effective switching frequency per device. This is vital in power generation, especially in medium and high power applications. Pulse dropping is avoided as the proposed modified SHE spreads the switching angles over 90°, in addition increasing the modulation index. The second proposed modulation strategy, called direct regular sampled pulse width modulation (DRSPWM), is for the current source inverter (CSI). It exploits a combination of forced and natural commutation imposed by the co-existence of an insulated gate bipolar transistor in series with a diode in a three phase current source inverter, to determine device dwell times and switching sequence selection. The DRSPWM strategy reduces switching frequency per device in a CSI by suspending each phase for 60°, similar to VSI dead-band, thus low switching losses are expected. Other benefits include simple digital platform implementation and more flexible switching sequence selection and pulse placement than with space vector modulation. The validity of the DRSPWM is confirmed using simulations and experimentation. This thesis also presents a new dc current offset compensation technique used to facilitate islanding or grid operation of inverter based distributed generation, with a reduced number of interfacing transformers. The proposed technique will enable transformerless operation of all inverters within the solar farm, and uses only one power transformer at the point of common coupling. The validity of the presented modulation strategies and dc current offset compensation technique are substantiated using simulations and experimentation.This thesis considers the use of three-phase voltage and current source inverters as interfacing units for renewable power, specifically photovoltaic (PV) into the ac grid. This thesis presented two modulation strategies that offer the possibility of operating PV inverters in grid and islanding modes, with reduced switching losses. The first modulation strategy is for the voltage source inverter (VSI), and exploits 3rd harmonic injection with selective harmonic elimination (SHE) to improve performance at low and high modulation indices, where the traditional SHE implementation experiences difficulties due to pulse dropping. The simulations and experimentation presented show that the proposed SHE allows grid PV inverters to be operated with less than a 1kHz effective switching frequency per device. This is vital in power generation, especially in medium and high power applications. Pulse dropping is avoided as the proposed modified SHE spreads the switching angles over 90°, in addition increasing the modulation index. The second proposed modulation strategy, called direct regular sampled pulse width modulation (DRSPWM), is for the current source inverter (CSI). It exploits a combination of forced and natural commutation imposed by the co-existence of an insulated gate bipolar transistor in series with a diode in a three phase current source inverter, to determine device dwell times and switching sequence selection. The DRSPWM strategy reduces switching frequency per device in a CSI by suspending each phase for 60°, similar to VSI dead-band, thus low switching losses are expected. Other benefits include simple digital platform implementation and more flexible switching sequence selection and pulse placement than with space vector modulation. The validity of the DRSPWM is confirmed using simulations and experimentation. This thesis also presents a new dc current offset compensation technique used to facilitate islanding or grid operation of inverter based distributed generation, with a reduced number of interfacing transformers. The proposed technique will enable transformerless operation of all inverters within the solar farm, and uses only one power transformer at the point of common coupling. The validity of the presented modulation strategies and dc current offset compensation technique are substantiated using simulations and experimentation

Adaptive saturation system for grid-tied inverters in low voltage residential micro-grids

Provision of ancillary services, like power quality improvement is a key to attain higher utilization of multifunctional grid-tied inverter. However, the power quality improvement is mainly limited by the power capacity the grid-tied inverter. This paper explores integration issues of the next-generation intermittent power sources. In particular, two different strategies for enhancing power quality given the residual power capacity of the inverters are developed. One strategy aims to obtain the expected power quality exploiting the dynamic saturation of the inverter rated apparent power and another strategy is based on peak current detection. Both strategies offer the possibility to generate appropriate references for the inner current control loop. The two proposed strategies are compared in performance, and a discussion on their practical implementation for the best performance of the inverters is provided78478915th IEEE International Conference on Environment and Electrical Engineering (EEEIC

A Novel Technique for Harmonics Estimation in Smart Urban Utility Grid with Solar Photovoltaic

Revolution in the field of electrical energy system is happening worldwide and existing grids are transforming into smart grids. The vision of smart grid demands a cutting edge technology for integrating the different renewable energy sources. Integration of renewable such as solar photovoltaic (PV) pose various challenges in the system, one such challenge is harmonics generation. Harmonics are generated by the associated power electronics based interfacing devices. Moreover the load connected to the distribution system is nonlinear and harmonic is rich in nature. Therefore, a lot of harmonics is injected into the system either from the source or from the load ends and affects the performance of power system. Harmonic distortions create excessive power loss and abnormal temperature rise, results the overheating of transformer, overheating of neutral conductor and malfunction of protective devices, which endangers the stability and reliability of the system. The smart distribution grid must absorb such concerns through critical technological solutions. In this paper, harmonics are analyzed for a solar PV integrated smart urban utility distribution feeder. In order to obtain the exact nature of harmonics and its contribution, a fast decoupled harmonic load flow algorithm is formulated and implemented on the designed smart utility grid. Results show that a lot of voltage/current harmonics are injected at various buses, lines and transformers by the solar PV and associated interfacing devices which even violates the harmonic limit of IEEE standards 519-1992. The authors feel that in order to achieve the smart distribution grid objectives of clean power supply to the customers, there is a serious necessity to study the issues related to harmonic generation, and further to develop control strategies to mitigate them. Keywords: Harmonics (THD), fast decoupled load flow, grid integration, solar PV, smart distribution system

Smart integration of a DC microgrid: Enhancing the power quality management of the neighborhood low-voltage distribution network

The fast development of the residential sector regarding the additional integration of renewable distributed energy sources and the modern expansion usage of essential DC electrical equipment may cause severe power quality problems. For example, the integration of rooftop photovoltaic (PV) may cause unbalance, and voltage fluctuation, which can add constraints for further PV integrations to the network, and the deployment of DC native loads with their nonlinear behavior adds harmonics to the network. This paper demonstrates the smart integration of a DC microgrid to the neighborhood low-voltage distribution network (NLVDN). The DC microgrid is connected to the NLVDN through a three-phase voltage source inverter (VSI), in which the VSI works as a distribution static compensator (DSTATCOM). Unlike previous STATCOM work in the literature, the proposed controller of the VSI of the DC smart building allows for many functions: (a) it enables bidirectional active/reactive power flow between the DC building and the AC grid at point of common coupling (PCC); (b) it compensates for the legacy unbalance in the distribution network, providing harmonics elimination and power factor correction capability at PCC; and (c) it provides voltage support at PCC. The proposed controller was validated by Matlab/Simulink and by experimental implementation at the lab

Power quality disturbance mitigation in grid connected photovoltaic distributed generation with plug-in hybrid electric vehicle

In the last twenty years, electric vehicles have gained significant popularity in domestic transportation. The introduction of fast charging technology forecasts increased the use of plug-in hybrid electric vehicle and electric vehicles (PHEVs). Reduced total harmonic distortion (THD) is essential for a distributed power generation system during the electric vehicle (EV) power penetration. This paper develops a combined controller for synchronizing photovoltaic (PV) to the grid and bidirectional power transfer between EVs and the grid. With grid synchronization of PV power generation, this paper uses two control loops. One controls EV battery charging and the other mitigates power quality disturbances. On the grid connected converter, a multicarrier space vector pulse width modulation approach (12-switch, three-phase inverter) is used to mitigate power quality disturbances. A Simulink model for the PV-EV-grid setup has been developed, for evaluating voltage and current THD percentages under linear and non-linear and PHEV load conditions and finding that the THD values are well within the IEEE 519 standards

A Novel Intelligent Neural Network Techniques of UPQC with Integrated Solar PV System for Power Quality Enhancement

A Novel, Intelligent control of a Unified Power Quality Conditioner (UPQC), coupled with a Photovoltaic (PV) system, is proposed in this work. It enhances the decarbonizes clean energy generation and maintains Power Quality (PQ) to the grid. In PV integrated UPQC, Crow Search Algorithm (CSA) assisted Perturb and Observation (P&O) Maximum Power Point Tracking (MPPT) technique. A d-q theory-based control is employed with the assistance of a Proportional Integral (PI) controller for controlling the working of UPQC and maintaining the power quality. The dynamic working of the PV-based UPQC is evaluated based on simulation outcomes attained from MATLAB

Unified three-port topology integrating a renewable and an energy storage system with the grid-interface operating as active power filter

This paper presents the experimental validation of a unified three-port topology, integrating a renewable energy source (RES) and an energy storage system (ESS) (or an electric vehicle) with the grid-interface operating as active power filter (APF). The proposed topology is based on a three-phase grid-interface (whose role is to operate as a APF grid-tied inverter capable of compensating current harmonics, imbalanced currents and low power factor), on a RES-interface for solar photovoltaic (PV) panels (whose role is to extract the maximum power from the PV panels), and on an ESS-interface for batteries (whose role is to store/inject energy according to the power management of the electrical installation). The paper presents the control algorithms for each interface within the scope of the different operation modes allowed by the unified three-port topology. Simulation and experimental results are presented in order to validate the distinguishing aspects of the proposed unified three-port topology.This work has been supported by FCT – Fundação para a Ciência e Tecnologia with-in the Project Scope: UID/CEC/00319/2019. This work has been supported by the FCT Project newERA4GRIDs PTDC/EEI-EEE/30283/2017, and by the FCT Project SAICTPAC/0004/2015 – POCI – 01– 0145–FEDER–016434. Tiago Sousa is supported by the doctoral scholarship SFRH/BD/134353/2017 granted by FCT