WLC22-4: Efficient request mechanism usage in IEEE 802.16

IEEE 802.16 protocols for metropolitan broadband wireless access systems have been standardized recently. According to the standard, a subscriber station can deliver bandwidth request messages to a base station by numerous methods. This paper provides both the simulation and analytical models for the investigation of specified random access method, which is compared with centralized polling and station- grouping mechanisms. Based on the assumptions of Bernoulli request arrival process and ideal channel conditions, the mean delay of a request transmission is evaluated for varying number of transmission opportunities and different arrival rates

Wireless broadband access: WiMAX and beyond - Investigation of bandwidth request mechanisms under point-to-multipoint mode of WiMAX networks

The WiMAX standard specifies a metropolitan area broadband wireless access air interface. In order to support QoS for multimedia applications, various bandwidth request and scheduling mechanisms are suggested in WiMAX, in which a subscriber station can send request messages to a base station, and the base station can grant or reject the request according to the available radio resources. This article first compares two fundamental bandwidth request mechanisms specified in the standard, random access vs. polling under the point-to-multipoint mode, a mandatory transmission mode. Our results demonstrate that random access outperforms polling when the request rate is low. However, its performance degrades significantly when the channel is congested. Adaptive switching between random access and polling according to load can improve system performance. We also investigate the impact of channel noise on the random access request mechanism

Performance analysis of contention based bandwidth request mechanisms in WiMAX networks

This article is posted here with the permission of IEEE. The official version can be obtained from the DOI below - Copyright @ 2010 IEEEWiMAX networks have received wide attention as they support high data rate access and amazing ubiquitous connectivity with great quality-of-service (QoS) capabilities. In order to support QoS, bandwidth request (BW-REQ) mechanisms are suggested in the WiMAX standard for resource reservation, in which subscriber stations send BW-REQs to a base station which can grant or reject the requests according to the available radio resources. In this paper we propose a new analytical model for the performance analysis of various contention based bandwidth request mechanisms, including grouping and no-grouping schemes, as suggested in the WiMAX standard. Our analytical model covers both unsaturated and saturated traffic load conditions in both error-free and error-prone wireless channels. The accuracy of this model is verified by various simulation results. Our results show that the grouping mechanism outperforms the no-grouping mechanism when the system load is high, but it is not preferable when the system load is light. The channel noise degrades the performance of both throughput and delay.This work was supported by the U.K. Engineering and Physical Sciences Research Council (EPSRC) under Grant EP/G070350/1 and by the Brunel University’s BRIEF Award

A Survey of Medium Access Mechanisms for Providing QoS in Ad-Hoc Networks

n/

Performance modelling and enhancement of wireless communication protocols

In recent years, Wireless Local Area Networks(WLANs) play a key role in the data communications and networking areas, having witnessed significant research and development. WLANs are extremely popular being almost everywhere including business,office and home deployments.In order to deal with the modem Wireless connectivity needs,the Institute of Electrical and Electronics Engineers(IEEE) has developed the 802.11 standard family utilizing mainly radio transmission techniques, whereas the Infrared Data Association (IrDA) addressed the requirement for multipoint connectivity with the development of the Advanced Infrared(Alr) protocol stack. This work studies the collision avoidance procedures of the IEEE 802.11 Distributed Coordination Function (DCF) protocol and suggests certain protocol enhancements aiming at maximising performance. A new, elegant and accurate analysis based on Markov chain modelling is developed for the idealistic assumption of unlimited packet retransmissions as well as for the case of finite packet retry limits. Simple equations are derived for the through put efficiency, the average packet delay, the probability of a packet being discarded when it reaches the maximum retransmission limit, the average time to drop such a packet and the packet inter-arrival time for both basic access and RTS/CTS medium access schemes.The accuracy of the mathematical model is validated by comparing analytical with OPNET simulation results. An extensive and detailed study is carried out on the influence of performance of physical layer, data rate, packet payload size and several backoff parameters for both medium access mechanisms. The previous mathematical model is extended to take into account transmission errors that can occur either independently with fixed Bit Error Rate(BER) or in bursts. The dependency of the protocol performance on BER and other factors related to independent and burst transmission errors is explored. Furthermore, a simple-implement appropriate tuning of the back off algorithm for maximizing IEEE 802-11 protocol performance is proposed depending on the specific communication requirements. The effectiveness of the RTS/CTS scheme in reducing collision duration at high data rates is studied and an all-purpose expression for the optimal use of the RTS/CTS reservation scheme is derived. Moreover, an easy-to-implement backoff algorithm that significantly enhances performance is introduced and an alternative derivation is developed based on elementary conditional probability arguments rather than bi-dimensional Markov chains. Finally, an additional performance improvement scheme is proposed by employing packet bursting in order to reduce overhead costs such as contention time and RTS/CTSex changes. Fairness is explored in short-time and long-time scales for both the legacy DCF and packet bursting cases. AIr protocol employs the RTS/CTS medium reservation scheme to cope with hidden stations and CSMA/CA techniques with linear contention window (CW) adjustment for medium access. A 1-dimensional Markov chain model is constructed instead of the bi-dimensional model in order to obtain simple mathematical equations of the average packet delay.This new approach greatly simplifies previous analyses and can be applied to any CSMA/CA protocol.The derived mathematical model is validated by comparing analytical with simulation results and an extensive Alr packet delay evaluation is carried out by taking into account all the factors and parameters that affect protocol performance. Finally, suitable values for both backoff and protocol parameters are proposed that reduce average packet delay and, thus, maximize performance

Design of Sequencing Medium Access Control to Improve the Performance of Wireless Networks

This paper presents a technique known as sequencing on MAC layer for wireless networks. MAC layer issues are very important while acceding channel over wireless networks. Normally, communication uses RTS/CTS mechanism to access channel for transmission of data. Mostly, it is observed that RTS/CTS handshake may introduce some delay especially in case of wireless networks. Hence, a sequencing method is proposed where selected RTS packets are dropped voluntarily to improve overall throughput of the network although individual performance of the transmissions is reduce

Medium access control and network planning in wireless networks

Wireless Local Area Networks (WLANs) and Wireless Metropolitan Area Networks (WMANs) are two of the main technologies in wireless data networks. WLANs have a short range and aim at providing connectivity to end users. On the other hand, WMANs have a long range and aim at serving as a backbone network and also at serving end users. In this dissertation, we consider the problem of Medium Access Control (MAC) in WLANs and the placement of Relay Stations (RSs) in WMANs. We propose a MAC scheme for WLANs in which stations contend by using jams on the channel. We present analytic and simulation results to find the optimal parameters of the scheme and measure its performance. Our scheme has a low collision rate and delay and a high throughput and fairness performance. Secondly, we present a MAC scheme for the latest generation of WLANs which have very high data rates. In this scheme, we divide the stations into groups and only one station from each group contends to the channel. We also use frame aggregation to reduce the overhead. We present analytic and simulation results which show that our scheme provides a small collision rate and, hence, achieves a high throughput. The results also show that our scheme provides a delay performance that is suitable for real-time applications and also has a high level of fairness. Finally, we consider the problem of placing Relay Stations (RSs) in WMANs. We consider the Worldwide Interoperability for Microwave Access (WIMAX) technology. The RSs are used to increase the capacity of the network and to extend its range. We present an optimization formulation that places RSs in the WiMAX network to serve a number of customers with a pre-defined bit rate. Our solution also provides fault-tolerance by allowing one RS to fail at a given time so that the performance to the users remains at a predictable level. The goal of our solution is to meet the demands of the users, provide fault-tolerance and minimize the number of RSs used

Group-Based Medium Access Control for IEEE 802.11n Wireless LANs

Abstract-The latest generation of Wireless Local Area Networks (WLANs) is based on IEEE 802.11n-2009 Standard. The standard provides very high data rates at the physical layer and aims to achieve a throughput at the Medium Access Control (MAC) layer that is higher than 100 Mbps. To do that, the standard introduces several mechanisms to improve the MAC efficiency. The most notable ones are the use of frame aggregation and Block-ACK frames. The standard, however, doesn't introduce a mechanism to reduce the probability of collision. This issue is significant because, with a high data rate, an AP would be able to serve a large number of stations, which would result in a high collision rate. In this paper, we propose a Group-based MAC (GMAC) scheme that reduces the probability of collision and also uses frame aggregation to improve the efficiency. The contending stations are divided into groups. Each group has one station that is the group leader. Only the leader stations contend, hence, reducing the probability of a collision. We evaluate the performance of our scheme with analytic and simulation results. The results show that GMAC achieves a high throughput, high fairness, low delay and maintains a high performance with high data rates

Throughput Enhancement of Restricted Access Window for Uniform Grouping Scheme in IEEE 802.11ah

IEEE 802.11ah has recently emerged as a promising standard for enabling massive machine-to-machine (M2M) communication. In order to support uplink data transmission from dense machine type clients (such as smart meters, IoT end nodes etc.), 802.11ah relies upon the restricted access window (RAW) based Medium Access Control (MAC) protocol. The underlying motivation behind this protocol is to reduce the contention for spectrum access among a large number of devices. The nodes contend with each other in their assigned RAW slot using Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA). In each RAW slot, the throughput depends upon the number of nodes. Current studies have suggested that the duration of each RAW slot should be the same in the entire RAW frame. However in this paper, we argue that the duration of each RAW slot should be chosen according to the size of the group. We present a model where a RAW frame is divided into two sub-frames and the duration of RAW slots in each sub-frame is chosen according to the size of the group. With the help of an analytical framework, we demonstrate that the throughput under our proposed scheme can be significantly enhanced when compared to a conventional implementation