Embedding deterministic patterns in partial pseudo-exhaustive test

The topic of this thesis is related to testing of very large scale integration circuits. The thesis presents the idea of optimizing mixed-mode built-in self-test (BIST) scheme. Mixed-mode BIST consists of two phases. The first phase is pseudo-random testing or partial pseudo-exhaustive testing (P-PET). For the faults not detected by the first phase, deterministic test patterns are generated and applied in the second phase. Hence, the defect coverage of the first phase influences the number of patterns to be generated and stored. The advantages of P-PET in comparison with usual pseudo-random test are in obtaining higher fault coverage and reducing the number of deterministic patterns in the second phase of mixed-mode BIST. Test pattern generation for P-PET is achieved by selecting characteristic polynomials of multiple-polynomial linear feedback shift register (MP-LFSR). In this thesis, the mixed-mode BIST scheme with P-PET in the first phase is further improved in terms of the fault coverage of the first phase. This is achieved by optimization of polynomial selection of P-PET. In usual mixed-mode BIST, the set of undetected by the first phase faults is handled in the second phase by generating deterministic test patterns for them. The method in the thesis is based on consideration of these patterns during polynomial selection. In other words, we are embedding deterministic test patterns in P-PET. In order to solve the problem, the algorithm for the selection of characteristic polynomials covering the pre-generated patterns is developed. The advantages of the proposed approach in terms of the defect coverage and the number of faults left after the first phase are presented using contemporary industrial circuits. A comparison with usual pseudo-random testing is also performed. The results prove the benefits of P-PET with embedded test patterns in terms of the fault coverage, while maintaining comparable test length and time

Towards an embedded board-level tester: study of a configurable test processor

The demand for electronic systems with more features, higher performance, and less power consumption increases continuously. This is a real challenge for design and test engineers because they have to deal with electronic systems with ever-increasing complexity maintaining production and test costs low and meeting critical time to market deadlines. For a test engineer working at the board-level, this means that manufacturing defects must be detected as soon as possible and at a low cost. However, the use of classical test techniques for testing modern printed circuit boards is not sufficient, and in the worst case these techniques cannot be used at all. This is mainly due to modern packaging technologies, a high device density, and high operation frequencies of modern printed circuit boards. This leads to very long test times, low fault coverage, and high test costs. This dissertation addresses these issues and proposes an FPGA-based test approach for printed circuit boards. The concept is based on a configurable test processor that is temporarily implemented in the on-board FPGA and provides the corresponding mechanisms to communicate to external test equipment and co-processors implemented in the FPGA. This embedded test approach provides the flexibility to implement test functions either in the external test equipment or in the FPGA. In this manner, tests are executed at-speed increasing the fault coverage, test times are reduced, and the test system can be adapted automatically to the properties of the FPGA and devices located on the board. An essential part of the FPGA-based test approach deals with the development of a test processor. In this dissertation the required properties of the processor are discussed, and it is shown that the adaptation to the specific test scenario plays a very important role for the optimization. For this purpose, the test processor is equipped with configuration parameters at the instruction set architecture and microarchitecture level. Additionally, an automatic generation process for the test system and for the computation of some of the processor’s configuration parameters is proposed. The automatic generation process uses as input a model known as the device under test model (DUT-M). In order to evaluate the entire FPGA-based test approach and the viability of a processor for testing printed circuit boards, the developed test system is used to test interconnections to two different devices: a static random memory (SRAM) and a liquid crystal display (LCD). Experiments were conducted in order to determine the resource utilization of the processor and FPGA-based test system and to measure test time when different test functions are implemented in the external test equipment or the FPGA. It has been shown that the introduced approach is suitable to test printed circuit boards and that the test processor represents a realistic alternative for testing at board-level.Der Bedarf an elektronischen Systemen mit zusätzlichen Merkmalen, höherer Leistung und geringerem Energieverbrauch nimmt ständig zu. Dies stellt eine erhebliche Herausforderung für Entwicklungs- und Testingenieure dar, weil sie sich mit elektronischen Systemen mit einer steigenden Komplexität zu befassen haben. Außerdem müssen die Herstellungs- und Testkosten gering bleiben und die Produkteinführungsfristen so kurz wie möglich gehalten werden. Daraus folgt, dass ein Testingenieur, der auf Leiterplatten-Ebene arbeitet, die Herstellungsfehler so früh wie möglich entdecken und dabei möglichst niedrige Kosten verursachen soll. Allerdings sind die klassischen Testmethoden nicht in der Lage, die Anforderungen von modernen Leiterplatten zu erfüllen und im schlimmsten Fall können diese Testmethoden überhaupt nicht verwendet werden. Dies liegt vor allem an modernen Gehäuse-Technologien, der hohen Bauteildichte und den hohen Arbeitsfrequenzen von modernen Leiterplatten. Das führt zu sehr langen Testzeiten, geringer Testabdeckung und hohen Testkosten. Die Dissertation greift diese Problematik auf und liefert einen FPGA-basierten Testansatz für Leiterplatten. Das Konzept beruht auf einem konfigurierbaren Testprozessor, welcher im On-Board-FPGA temporär implementiert wird und die entsprechenden Mechanismen für die Kommunikation mit der externen Testeinrichtung und Co-Prozessoren im FPGA bereitstellt. Dadurch ist es möglich Testfunktionen flexibel entweder auf der externen Testeinrichtung oder auf dem FPGA zu implementieren. Auf diese Weise werden Tests at-speed ausgeführt, um die Testabdeckung zu erhöhen. Außerdem wird die Testzeit verkürzt und das Testsystem automatisch an die Eigenschaften des FPGAs und anderer Bauteile auf der Leiterplatte angepasst. Ein wesentlicher Teil des FPGA-basierten Testansatzes umfasst die Entwicklung eines Testprozessors. In dieser Dissertation wird über die benötigten Eigenschaften des Prozessors diskutiert und es wird gezeigt, dass die Anpassung des Prozessors an den spezifischen Testfall von großer Bedeutung für die Optimierung ist. Zu diesem Zweck wird der Prozessor mit Konfigurationsparametern auf der Befehlssatzarchitektur-Ebene und Mikroarchitektur-Ebene ausgerüstet. Außerdem wird ein automatischer Generierungsprozess für die Realisierung des Testsystems und für die Berechnung einer Untergruppe von Konfigurationsparametern des Prozessors vorgestellt. Der automatische Generierungsprozess benutzt als Eingangsinformation ein Modell des Prüflings (device under test model, DUT-M). Das entwickelte Testsystem wurde zum Testen von Leiterplatten für Verbindungen zwischen dem FPGA und zwei Bauteilen verwendet, um den FPGA-basierten Testansatz und die Durchführbarkeit des Testprozessors für das Testen auf Leiterplatte-Ebene zu evaluieren. Die zwei Bauteile sind ein Speicher mit direktem Zugriff (static random-access memory, SRAM) und eine Flüssigkristallanzeige (liquid crystal display, LCD). Die Experimente wurden durchgeführt, um den Ressourcenverbrauch des Prozessors und Testsystems festzustellen und um die Testzeit zu messen. Dies geschah durch die Implementierung von unterschiedlichen Testfunktionen auf der externen Testeinrichtung und dem FPGA. Dadurch konnte gezeigt werden, dass der FPGA-basierte Ansatz für das Testen von Leiterplatten geeignet ist und dass der Testprozessor eine realistische Alternative für das Testen auf Leiterplatten-Ebene ist

Synthesis for circuit reliability

textElectrical and Computer Engineerin

フィールドにおけるテスト印加と低電力論理BISTに関する研究

Advances in semiconductor process technology have resulted in various aging issues in field operation of Very Large Scale Integration (VLSI) circuits. For example, HCI (Hot carrier injection), BTI (Bias Temperature Instability), TDDB (Time Dependent Dielectric Breakdown) are well-known aging phenomena, and they can increase the circuit delay resulting in serious reliability problems. In order to avoid system failures caused by aging, recent design usually sets a certain timing margin in operational frequency of the circuit. However, it is difficult to determine the size of the proper timing margin because of the difficulty of prediction of its aging speed in actual use that is related to operational environment. Pessimistic prediction may result in performance sacrificing although it will improve the reliability of the system. BIST-based field test is a promising way to guarantee the reliability of the circuit through detecting the aging-induced faults during the circuit operation. However, the field test has a limitation on test application time, which makes it difficult to achieve high test quality. Therefore an effective test application method at field is required. In addition to the requirement of short test application time, the BIST-based field test requires performing at-speed testing in order to detect timing-related defects. However, it is well known that power dissipation during testing is much higher than that in normal circuit operation. Because excessive power dissipation causes higher IR-drop and higher temperature, it results in delay increase during testing, and in turn, causing false at-speed testing and yield loss. While many low power test methods have been proposed to tackle the test power issue, inadequate test power reduction and lower fault coverage still remain as important issues. Moreover, low power testing that just focuses on power reduction is insufficient. When the test power is reduced to a very low level, a timing-related defect may be missed by the test, and a defective circuit will appear to be a good part passing the test. Therefore, appropriate test power control is necessary though it was out of considering in the existing methods. In this dissertation, we first proposed a new test application to satisfy the limitation of short test application time for BIST-based field test, and then we proposed a new low power BIST scheme that focuses on controlling the test power to a specified value for improving the field test quality. In chapter 3, a new field test application method named “rotating test” is presented in which a set of generated test patterns to detect aging-induced faults is partitioned into several subsets, and apply each subset in one test session at field. In order to maximize the test quality for rotating test, we proposed test partitioning methods that refer to two items: First one aims at maximizing fault coverage of each subset obtained by partitioning. Second one aims at minimizing the detection time interval of all faults in rotating test to avoid system failures. Experimental results demonstrated the effectiveness of the proposed partitioning methods. In chapter 4, we proposed a new low power BIST scheme which can control the scan-in power, scan-out power and capture power while keeping test coverage at high level. In this scheme, a new circuit called pseudo low-pass filter (PLPF) is developed for scan-in power control, and a multi-cycle capture test technique is employed to reduce the capture power. In order to control scan-out power dissipated by test responses, we proposed a novel method that selects some flip-flops in scan chains at logic design phase, and fills the selected flip-flops with proper values before starting scan-shift operation so as to reduce the switching activity associated with scan-out. The experimental results for ISCAS-89 and ITC-99 benchmark circuits show that significant scan-in power reduction rate (the original rate of 50% is reduced to 7~8%) and capture power reduction rate (the original rate of 20% is reduced to 6~7%) were derived. With the scan-out controlling method, the scan-out power can be reduced from 17.2% to 8.4%, which could not be achieved by the conventional methods. Moreover, in order to control the test power to the specified rate to accommodate the various test power requirements. A scan-shift power controlling scheme was also discussed. It showed the capability of controlling any scan-shift toggle rate between 6.7% and 50%.九州工業大学博士学位論文 学位記番号:情工博甲第289号　学位授与年月日:平成26年3月25日1. INTRODUCTION|2. PRELIMINARY|3. BIST-BASED FIELD ROTATING TEST FOR AGING-INDUCED FAULT DETECTION|4. TEST POWER REDUCTION FOR LOGIC-BIST|5. SUMMARY九州工業大学平成25年

Enabling low cost test and tuning of difficult-to-measure device specifications: application to DC-DC converters and high speed devices

Low-cost test and tuning methods for difficult-to-measure specifications are presented in this research from the following perspectives: 1)"Safe" test and self-tuning for power converters: To avoid the risk of device under test (DUT) damage during conventional load/line regulation measurement on power converter, a "safe" alternate test structure is developed where the power converter (boost/buck converter) is placed in a different mode of operation during alternative test (light switching load) as opposed to standard test (heavy switching load) to prevent damage to the DUT during manufacturing test. Based on the alternative test structure, self-tuning methods for both boost and buck converters are also developed in this thesis. In addition, to make these test structures suitable for on-chip built-in self-test (BIST) application, a special sensing circuit has been designed and implemented. Stability analysis filters and appropriate models are also implemented to predict the DUT’s electrical stability condition during test and to further predict the values of tuning knobs needed for the tuning process. 2) High bandwidth RF signal generation: Up-convertion has been widely used in high frequency RF signal generation but mixer nonlinearity results in signal distortion that is difficult to eliminate with such methods. To address this problem, a framework for low-cost high-fidelity wideband RF signal generation is developed in this thesis. Depending on the band-limited target waveform, the input data for two interleaved DACs (digital-to-analog converters) system is optimized by a matrix-model-based algorithm in such a way that it minimizes the distortion between one of its image replicas in the frequency domain and the target RF waveform within a specified signal bandwidth. The approach is used to demonstrate how interferers with specified frequency characteristics can be synthesized at low cost for interference testing of RF communications systems. The frameworks presented in this thesis have a significant impact in enabling low-cost test and tuning of difficult-to-measure device specifications for power converter and high-speed devices.Ph.D