Impact of the Integration of a STATCOM Controlled by LQG/H2 Regulator in an Energy System

© The Author(s); licensee IIETA, Edmonton, Canada. This is an open access article distributed under the terms of the Creative Commons Attribution License (CC BY), https://creativecommons.org/licenses/by/4.0/Nowadays, the reactive power consumption is becoming a serious problem for electricity network management. To overcome this problem, several solutions are proposed in the literature. In the present study, the static reactive power compensator (STATCOM) solution is used to keep the network voltage within its rated range. The STATCOM is modeled in the axes of Park reference frame and is driven controlled by a SVPWM strategy. Its control scheme is based on a multivariable Linear Quadratic Gaussian (LQG/H2) controller, which has the advantage of being applied to systems whose condition is not measured. Simulations are performed using the MATLAB/SIMULINK software. Results are presented, compared and discussed.Peer reviewe

Load frequency controllers considering renewable energy integration in power system

Abstract: Load frequency control or automatic generation control is one of the main operations that take place daily in a modern power system. The objectives of load frequency control are to maintain power balance between interconnected areas and to control the power flow in the tie-lines. Electric power cannot be stored in large quantity that is why its production must be equal to the consumption in each time. This equation constitutes the key for a good management of any power system and introduces the need of more controllers when taking into account the integration of renewable energy sources into the traditional power system. There are many controllers presented in the literature and this work reviews the traditional load frequency controllers and those, which combined the traditional controller and artificial intelligence algorithms for controlling the load frequency

Evaluation of the different numerical formats for HIL models of power converters after the adoption of VHDL-2008 by xilinx

Hardware in the loop is a widely used technique in power electronics, allowing to test and debug in real time (RT) at a low cost. In this context, field-programmable gate arrays (FPGAs) play an important role due to the high-speed requirements of RT simulations, in which area optimization is also crucial. Both characteristics, area and speed, are affected by the numerical formats (NFs) and their rounding modes. Regarding FPGAs, Xilinx is one of the largest manufacturers in the world, offering Vivado as its main design suite, but it was not until the release of Vivado 2020.2 that support for the IEEE NF libraries of VHDL-2008 was included. This work presents an exhaustive evaluation of the performance of Vivado 2020.2 in terms of area and speed using the native IEEE libraries of VHDL-2008 regarding NF. Results show that even though fixed-point NFs optimize area and speed, if a user prefers the use of floating-point NFs, with this new release, it can be synthesized—which could not be done in previous versions of Vivado. Although support for the native IEEE libraries of VHDL-2008 was included in Vivado 2020.2, it still lacks some issues regarding NF conversion during synthesis while support for simulation is not yet includedThis research received no external fundin

Optimized state feedback regulation of 3DOF helicopter system via extremum seeking

In this paper, an optimized state feedback regulation of a 3 degree of freedom (DOF) helicopter is designed via extremum seeking (ES) technique. Multi-parameter ES is applied to optimize the tracking performance via tuning State Vector Feedback with Integration of the Control Error (SVFBICE). Discrete multivariable version of ES is developed to minimize a cost function that measures the performance of the controller. The cost function is a function of the error between the actual and desired axis positions. The controller parameters are updated online as the optimization takes place. This method significantly decreases the time in obtaining optimal controller parameters. Simulations were conducted for the online optimization under both fixed and varying operating conditions. The results demonstrate the usefulness of using ES for preserving the maximum attainable performance

Development of Novel Compound Controllers to Reduce Chattering of Sliding Mode Control

The robotics and dynamic systems constantly encountered with disturbances such as micro electro mechanical systems (MEMS) gyroscope under disturbances result in mechanical coupling terms between two axes, friction forces in exoskeleton robot joints, and unmodelled dynamics of robot manipulator. Sliding mode control (SMC) is a robust controller. The main drawback of the sliding mode controller is that it produces high-frequency control signals, which leads to chattering. The research objective is to reduce chattering, improve robustness, and increase trajectory tracking of SMC. In this research, we developed controllers for three different dynamic systems: (i) MEMS, (ii) an Exoskeleton type robot, and (iii) a 2 DOF robot manipulator. We proposed three sliding mode control methods such as robust sliding mode control (RSMC), new sliding mode control (NSMC), and fractional sliding mode control (FSMC). These controllers were applied on MEMS gyroscope, Exoskeleton robot, and robot manipulator. The performance of the three proposed sliding mode controllers was compared with conventional sliding mode control (CSMC). The simulation results verified that FSMC exhibits better performance in chattering reduction, faster convergence, finite-time convergence, robustness, and trajectory tracking compared to RSMC, CSMC, and NSFC. Also, the tracking performance of NSMC was compared with CSMC experimentally, which demonstrated better performance of the NSMC controller