4,333 research outputs found
PLC sensor IPv6 networking interoperabe with WSN
International audienceTechnology evolution have made possible to connect all kind of devices to IP network. This becomes an evident objective for sensors networks research. In this paper, we investigate the possibility of using IPv6 for sensor networks connected through powerline communication (PLC) non-wireless mediums and demonstrate possible interoperability. Our work is based on the adaptation of the IEEE 802.15.4 standard protocol. It is constrained by the low-power, lossy and low data-rate context of powerline transceiver that uses pulse modulation. Our aim is to provide interoperability features regarding others mediums with a robust and reliable communication stack for smart metering, home control or home area networks applications. This document propose the first adaptation of the IEEE 802.15.4 commons standard on PLC medium. Following this standard interface, we demonstrate the possibility to carry out data on PLC with great reliability, and low power energy requirement using our WPCTMphysical layer (standing for Watt Pulse Communication (WPC)). Relying on this adaptation, we then focus on the convergence of the IPv6 protocol at the network level, with the 6LoWPAN adaptation. We also present our initial implementation of the RPL setup and routing protocol. This allows for a full network layer stack and results in efficient routing in our low power, low data-rate and lossy network context. Thus, we finally demonstrate interoperability with a real testbed between powerline and wireless sensor networks running IEEE 802.15.4/6LoWPAN/IPv6/RPL stacks. We conclude about the interest of such interoperability for the real usage of sensor networks with a feedback from field's applications deployment and our future work
Securing Internet of Things with Lightweight IPsec
Real-world deployments of wireless sensor networks (WSNs) require
secure communication. It is important that a receiver is able to verify that sensor
data was generated by trusted nodes. In some cases it may also be necessary
to encrypt sensor data in transit. Recently, WSNs and traditional IP networks
are more tightly integrated using IPv6 and 6LoWPAN. Available IPv6 protocol
stacks can use IPsec to secure data exchange. Thus, it is desirable to extend
6LoWPAN such that IPsec communication with IPv6 nodes is possible. It is
beneficial to use IPsec because the existing end-points on the Internet do not
need to be modified to communicate securely with the WSN. Moreover, using
IPsec, true end-to-end security is implemented and the need for a trustworthy
gateway is removed.
In this paper we provide End-to-End (E2E) secure communication between
an IP enabled sensor nodes and a device on traditional Internet. This is the
first compressed lightweight design, implementation, and evaluation of 6LoWPAN
extension for IPsec on Contiki. Our extension supports both IPsec's Authentication
Header (AH) and Encapsulation Security Payload (ESP). Thus,
communication endpoints are able to authenticate, encrypt and check the integrity
of messages using standardized and established IPv6 mechanisms
A survey on subjecting electronic product code and non-ID objects to IP identification
Over the last decade, both research on the Internet of Things (IoT) and
real-world IoT applications have grown exponentially. The IoT provides us with
smarter cities, intelligent homes, and generally more comfortable lives.
However, the introduction of these devices has led to several new challenges
that must be addressed. One of the critical challenges facing interacting with
IoT devices is to address billions of devices (things) around the world,
including computers, tablets, smartphones, wearable devices, sensors, and
embedded computers, and so on. This article provides a survey on subjecting
Electronic Product Code and non-ID objects to IP identification for IoT
devices, including their advantages and disadvantages thereof. Different
metrics are here proposed and used for evaluating these methods. In particular,
the main methods are evaluated in terms of their: (i) computational overhead,
(ii) scalability, (iii) adaptability, (iv) implementation cost, and (v) whether
applicable to already ID-based objects and presented in tabular format.
Finally, the article proves that this field of research will still be ongoing,
but any new technique must favorably offer the mentioned five evaluative
parameters.Comment: 112 references, 8 figures, 6 tables, Journal of Engineering Reports,
Wiley, 2020 (Open Access
IETF standardization in the field of the Internet of Things (IoT): a survey
Smart embedded objects will become an important part of what is called the Internet of Things. However, the integration of embedded devices into the Internet introduces several challenges, since many of the existing Internet technologies and protocols were not designed for this class of devices. In the past few years, there have been many efforts to enable the extension of Internet technologies to constrained devices. Initially, this resulted in proprietary protocols and architectures. Later, the integration of constrained devices into the Internet was embraced by IETF, moving towards standardized IP-based protocols. In this paper, we will briefly review the history of integrating constrained devices into the Internet, followed by an extensive overview of IETF standardization work in the 6LoWPAN, ROLL and CoRE working groups. This is complemented with a broad overview of related research results that illustrate how this work can be extended or used to tackle other problems and with a discussion on open issues and challenges. As such the aim of this paper is twofold: apart from giving readers solid insights in IETF standardization work on the Internet of Things, it also aims to encourage readers to further explore the world of Internet-connected objects, pointing to future research opportunities
Supporting Cyber-Physical Systems with Wireless Sensor Networks: An Outlook of Software and Services
Sensing, communication, computation and control technologies are the essential building blocks of a cyber-physical system (CPS). Wireless sensor networks (WSNs) are a way to support CPS as they provide fine-grained spatial-temporal sensing, communication and computation at a low premium of cost and power. In this article, we explore the fundamental concepts guiding the design and implementation of WSNs. We report the latest developments in WSN software and services for meeting existing requirements and newer demands; particularly in the areas of: operating system, simulator and emulator, programming abstraction, virtualization, IP-based communication and security, time and location, and network monitoring and management. We also reflect on the ongoing
efforts in providing dependable assurances for WSN-driven CPS. Finally, we report on its applicability with a case-study on smart buildings
Demo Abstract: Securing Communication in 6LoWPAN with Compressed IPsec
With the inception of IPv6 it is possible to assign
a unique ID to each device on planet. Recently, wireless sensor
networks and traditional IP networks are more tightly integrated
using IPv6 and 6LoWPAN. Real-world deployments of WSN
demand secure communication. The receiver should be able to
verify that sensor data is generated by trusted nodes and/or
it may also be necessary to encrypt sensor data in transit.
Available IPv6 protocol stacks can use IPsec to secure data
exchanges. Thus, it is desirable to extend 6LoWPAN such that
IPsec communication with IPv6 nodes is possible. It is beneficial
to use IPsec because the existing end-points on the Internet do
not need to be modified to communicate securely with the WSN.
Moreover, using IPsec, true end-to-end security is implemented
and the need for a trustworthy gateway is removed.
In this demo we will show the usage of our implemented
lightweight IPsec. We will show how IPsec ensures end-to-end
security between an IP enabled sensor networks and the
traditional Internet. This is the first compressed lightweight
design, implementation, and evaluation of a 6LoWPAN extension
for IPsec. This demo complements the full paper that will appear
in the parent conference, DCOSS’11
Surfing the Internet-of-Things: lightweight access and control of wireless sensor networks using industrial low power protocols
Internet-of-Things (IoT) is emerging to play an important role in the continued advancement of information and communication technologies. To accelerate industrial application developments, the use of web services for networking applications is seen as important in IoT communications. In this paper, we present a RESTful web service architecture for energy-constrained wireless sensor networks (WSNs) to enable remote data collection from sensor devices in WSN nodes. Specifically, we consider both IPv6 protocol support in WSN nodes as well as an integrated gateway solution to allow any Internet clients to access these nodes.We describe the implementation of a prototype system, which demonstrates the proposed RESTful approach to collect sensing data from a WSN. A performance evaluation is presented to illustrate the simplicity and efficiency of our proposed scheme
- …