Practical Schemes For Privacy & Security Enhanced RFID

Proper privacy protection in RFID systems is important. However, many of the schemes known are impractical, either because they use hash functions instead of the more hardware efficient symmetric encryption schemes as a efficient cryptographic primitive, or because they incur a rather costly key search time penalty at the reader. Moreover, they do not allow for dynamic, fine-grained access control to the tag that cater for more complex usage scenarios. In this paper we investigate such scenarios, and propose a model and corresponding privacy friendly protocols for efficient and fine-grained management of access permissions to tags. In particular we propose an efficient mutual authentication protocol between a tag and a reader that achieves a reasonable level of privacy, using only symmetric key cryptography on the tag, while not requiring a costly key-search algorithm at the reader side. Moreover, our protocol is able to recover from stolen readers.Comment: 18 page

A Cloud-based RFID Authentication Protocol with Insecure Communication Channels

© 2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.Radio Frequency Identification (RFID) has becomea widespread technology to automatically identify objects and withthe development of cloud computing, cloud-based RFID systemsattract more research these days. Several cloud-based RFIDauthentication protocols have been proposed to address privacyand security properties in the environment where the cloudprovider is untrusted therefore the tag’s data are encrypted andanonymously stored in the cloud database. However, most of thecloud-based RFID authentication protocols assume securecommunication channels between the reader and the cloud server.To protect data transmission between the reader and the cloudserver without any help from a third party, this paper proposes acloud-based RFID authentication protocol with insecurecommunication channels (cloud-RAPIC) between the reader and the cloud server. The cloud-RAPIC protocol preserves tag privacyeven when the tag does not update its identification. The cloudRAPIC protocol has been analyzed using the UPriv model andAVISPA verification tool which have proved that the protocolpreserves tag privacy and protects data secrecy

Secure and efficient data extraction for ubiquitous computing applications

Ubiquitous computing creates a world where computers have blended seamlessly into our physical environment. In this world, a computer is no longer a monitor-and-keyboard setup, but everyday objects such as our clothing and furniture. Unlike current computer systems, most ubiquitous computing systems are built using small, embedded devices with limited computational, storage and communication abilities. A common requirement for many ubiquitous computing applications is to utilize the data from these small devices to perform more complex tasks. For critical applications such as healthcare or medical related applications, there is a need to ensure that only authorized users have timely access to the data found in the small device. In this dissertation, we study the problem of how to securely and efficiently extract data from small devices.;Our research considers two categories of small devices that are commonly used in ubiquitous computing, battery powered sensors and battery free RFID tags. Sensors are more powerful devices equipped with storage and sensing capabilities that are limited by battery power, whereas tags are less powerful devices with limited functionalities, but have the advantage of being operable without battery power. We also consider two types of data access patterns, local and remote access. In local data access, the application will query the tag or the sensor directly for the data, while in remote access, the data is already aggregated at a remote location and the application will query the remote location for the necessary information, The difference between local and remote access is that in local access, the tag or sensor only needs to authenticate the application before releasing the data, but in remote access, the small device may have to perform additional processing to ensure that the data remains secure after being collected. In this dissertation, we present secure and efficient local data access solutions for a single RFID tag, multiple RFID tags, and a single sensor, and remote data access solutions for both RFID tag and sensor

Threat modeling for communication security of IoT-enabled digital logistics

The modernization of logistics through the use of Wireless Sensor Network (WSN) Internet of Things (IoT) devices promises great efficiencies. Sensor devices can provide real-time or near real-time condition monitoring and location tracking of assets during the shipping process, helping to detect delays, prevent loss, and stop fraud. However, the integration of low-cost WSN/IoT systems into a pre-existing industry should first consider security within the context of the application environment. In the case of logistics, the sensors are mobile, unreachable during the deployment, and accessible in potentially uncontrolled environments. The risks to the sensors include physical damage, either malicious/intentional or unintentional due to accident or the environment, or physical attack on a sensor, or remote communication attack. The easiest attack against any sensor is against its communication. The use of IoT sensors for logistics involves the deployment conditions of mobility, inaccesibility, and uncontrolled environments. Any threat analysis needs to take these factors into consideration. This paper presents a threat model focused on an IoT-enabled asset tracking/monitoring system for smart logistics. A review of the current literature shows that no current IoT threat model highlights logistics-specific IoT security threats for the shipping of critical assets. A general tracking/monitoring system architecture is presented that describes the roles of the components. A logistics-specific threat model that considers the operational challenges of sensors used in logistics, both malicious and non-malicious threats, is then given. The threat model categorizes each threat and suggests a potential countermeasure

A Practical Attack on the MIFARE Classic

The MIFARE Classic is the most widely used contactless smart card in the market. Its design and implementation details are kept secret by its manufacturer. This paper studies the architecture of the card and the communication protocol between card and reader. Then it gives a practical, low-cost, attack that recovers secret information from the memory of the card. Due to a weakness in the pseudo-random generator, we are able to recover the keystream generated by the CRYPTO1 stream cipher. We exploit the malleability of the stream cipher to read all memory blocks of the first sector of the card. Moreover, we are able to read any sector of the memory of the card, provided that we know one memory block within this sector. Finally, and perhaps more damaging, the same holds for modifying memory blocks

Security protocol based on random key generation for an Rfid system

Radio Frequency Identification (RFID) is a technology, which describes the transmission of unique information by a wireless device, over Radio waves, when prompted or read by a compatible reader; The basic components in implementing RFID are RFID tags which are small microchips attached to a radio antenna, mounted on a substrate, and a wireless transceiver/reader that queries the RFID tags; This thesis deals with research issues related to security aspects in the communication between an RFID tag and its reader. More precisely, it deals with a new, simple and efficient security protocol based on an encryption that uses the concept of regular public key regeneration, which can be effortlessly adopted in an RFID application

Criptografía ligera en dispositivos de identificación por radiofrecuencia- RFID

Esta tesis se centra en el estudio de la tecnología de identificación por radiofrecuencia (RFID), la cual puede ser considerada como una de las tecnologías más prometedoras dentro del área de la computación ubicua. La tecnología RFID podría ser el sustituto de los códigos de barras. Aunque la tecnología RFID ofrece numerosas ventajas frente a otros sistemas de identificación, su uso lleva asociados riesgos de seguridad, los cuales no son fáciles de resolver. Los sistemas RFID pueden ser clasificados, atendiendo al coste de las etiquetas, distinguiendo principalmente entre etiquetas de alto coste y de bajo coste. Nuestra investigación se centra fundamentalmente en estas últimas. El estudio y análisis del estado del arte nos ha permitido identificar la necesidad de desarrollar soluciones criptográficas ligeras adecuadas para estos dispositivos limitados. El uso de soluciones criptográficas estándar supone una aproximación correcta desde un punto de vista puramente teórico. Sin embargo, primitivas criptográficas estándar (funciones resumen, código de autenticación de mensajes, cifradores de bloque/flujo, etc.) exceden las capacidades de las etiquetas de bajo coste. Por tanto, es necesario el uso de criptografía ligera._______________________________________This thesis examines the security issues of Radio Frequency Identification (RFID) technology, one of the most promising technologies in the field of ubiquitous computing. Indeed, RFID technology may well replace barcode technology. Although it offers many advantages over other identification systems, there are also associated security risks that are not easy to address. RFID systems can be classified according to tag price, with distinction between high-cost and low-cost tags. Our research work focuses mainly on low-cost RFID tags. An initial study and analysis of the state of the art identifies the need for lightweight cryptographic solutions suitable for these very constrained devices. From a purely theoretical point of view, standard cryptographic solutions may be a correct approach. However, standard cryptographic primitives (hash functions, message authentication codes, block/stream ciphers, etc.) are quite demanding in terms of circuit size, power consumption and memory size, so they make costly solutions for low-cost RFID tags. Lightweight cryptography is therefore a pressing need. First, we analyze the security of the EPC Class-1 Generation-2 standard, which is considered the universal standard for low-cost RFID tags. Secondly, we cryptanalyze two new proposals, showing their unsuccessful attempt to increase the security level of the specification without much further hardware demands. Thirdly, we propose a new protocol resistant to passive attacks and conforming to low-cost RFID tag requirements. In this protocol, costly computations are only performed by the reader, and security related computations in the tag are restricted to very simple operations. The protocol is inspired in the family of Ultralightweight Mutual Authentication Protocols (UMAP: M2AP, EMAP, LMAP) and the recently proposed SASI protocol. The thesis also includes the first published cryptanalysis of xi SASI under the weakest attacker model, that is, a passive attacker. Fourthly, we propose a new protocol resistant to both passive and active attacks and suitable for moderate-cost RFID tags. We adapt Shieh et.’s protocol for smart cards, taking into account the unique features of RFID systems. Finally, because this protocol is based on the use of cryptographic primitives and standard cryptographic primitives are not supported, we address the design of lightweight cryptographic primitives. Specifically, we propose a lightweight hash function (Tav-128) and a lightweight Pseudo-Random Number Generator (LAMED and LAMED-EPC).We analyze their security level and performance, as well as their hardware requirements and show that both could be realistically implemented, even in low-cost RFID tags

Digital twin of experimental smart manufacturing assembly system for Industry 4.0 concept

This article deals with the creation of a digital twin for an experimental assembly system based on a belt conveyor system and an automatized line for quality production check. The point of interest is a Bowden holder assembly from a 3D printer, which consists of a stepper motor, plastic components, and some fastener parts. The assembly was positioned in a fixture with ultra high frequency (UHF) tags and internet of things (IoT) devices for identification of status and position. The main task was parts identification and inspection, with the synchronization of all data to a digital twin model. The inspection system consisted of an industrial vision system for dimension, part presence, and errors check before and after assembly operation. A digital twin is realized as a 3D model, created in CAD design software (CDS) and imported to a Tecnomatix platform to simulate all processes. Data from the assembly system were collected by a programmable logic controller (PLC) system and were synchronized by an open platform communications (OPC) server to a digital twin model and a cloud platform (CP). Digital twins can visualize the real status of a manufacturing system as 3D simulation with real time actualization. Cloud platforms are used for data mining and knowledge representation in timeline graphs, with some alarms and automatized protocol generation. Virtual digital twins can be used for online optimization of an assembly process without the necessity to stop that is involved in a production line. © 2020 by the authors.European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-CurieEuropean Union (EU) [734713]; Ministry of Industry and Trade of the Czech Republic [FV20419]; Ministry of Education of the Slovak Republic [VEGA 1/0700/20, 055TUKE-4/2020