Evaluasi Performansi Metode Error Control Hybrid ARQ pada Reverse Link CDMA 2000 1x EVDO PERFORMANCE EVALUATION METHOD OF ERROR CONTROL HYBRID ARQ ON CDMA2000 1XEVDO REV.A REVERSE LINK

ABSTRAKSI: CDMA2000-1x EV-DO merupakan sistem seluler generasi ketiga(3G) yang dapat memenuhi permintaan yang tinggi untuk akses internet secara wireless dengan kecepatan lebih tinggi. CDMA2000 1x EV-DO Rev.A merupakan pengembangan dari CDMA2000 1x EV-DO Rev. 0 yang mempunyai data rate 1,8 Mbps. Teknologi ini dapat mendukung layanan wide-variety of symmetric, delay-sensitive, real-time, dan suara dan broadband secara bersamaan. Beberapa teknik yang digunakan dalam CDMA2000 1x EV-DO Rev. A untuk mendukung packet-switched lebih cepat pada arah reverse adalah sebagai berikut : fast uplink rate control, fast hybrid ARQ, Incremental Redudancy Feedback, uplink channelization, Short Transmission Time Interval (TTI).Pada tugas akhir ini akan menganalisa performansi mtode error control HARQ pada CDMA2000 1x EV-DO Rev. A pada reverse link (uplink). Pengamatan hanya pada CDMA2000 1x EV-DO Revison A dan mengacu pada standart 3GPP2Untuk mendapatkan hasil penelitian ini dilakukan simulasi dengan menggunakan Matlab 7.1 sp.3. Di dalam simulasi tersebut dilakukan pengamatan terhadap posisi beberapa user yang sama dan mengirim data secara bersamaan. Pengaruh jarak dan posisi user terhadap throughput serta kualitas reverse link guna untuk menunjang aplikasi – aplikasi yang membutuhkan simetrik sensitif delay.Pada tugas akhir ini mendapatkan performansi yang optimal pada sistem CDMA2000 1x EV-DO rev. A khususnya pada arah reverse metode HARQ dengan sistem multi user dimana user lain dianggap interferensi sebanyak 4 dan 16 user yang mampu mencapai BER 10-5 sampai kecepatan 120 km/jam dan kecepatan 50 km/jam.Kata Kunci : -ABSTRACT: CDMA 2000 1x EVDO is third generation of cellular system which meet demand for wireless internet high speed access. CDMA2000 1x EV-DO Rev.A is developing of CDMA2000 1x EV-DO Rev. 0 that have 1,8 Mbps data rate. This technology can support wide-variety of symmetric, delay-sensitive, real-time, voice and broadband services in same time. Fast uplink rate control, fast hybrid ARQ, Incremental Redundancy Feedback, uplink channelization, Short Transmission Time Interval (TTI) were used in CDMA2000 1x EV-DO Rev. A to get high speed reverse access on packet switched.This final project monitoring and analyze HARQ error control method in CDMA2000 1x EV-DO Rev. A reverse link (uplink) which based on 3GPP2 standard.To find out the result of research, Matlab 7.1 sp.3 is used. This software used to simulate the position of several users where send data in same time. Distance and user position influences of throughput, reverse link quality to support applications which need the symmetric sensitive delay.In final project gotten optimal performance on CDMA 1x EV-DO rev.A especially reverse link with HARQ method multi-user system where number of user is 4 and 16 that can reach BER 10-5 until for 120 km/hours and 50 km/hours.Keyword: Hybrid ARQ, EVDO Rev.A, BER, Throughpu

GAME THEORETIC APPROACH TO RADIO RESOURCE MANAGEMENT ON THE REVERSE LINK FOR MULTI-RATE CDMA WIRELESS DATA NETWORKS

This work deals with efficient power and rate assignment to mobile stations (MSs) involved in bursty data transmission in cellular CDMA networks. Power control in the current CDMA standards is based on a fixed target signal quality called signal to interference ratio (SIR). The target SIR represents a predefined frame error rate (FER). This approach is inefficient for data-MSs because a fixed target SIR can limit the MS's throughput. Power control should thus provide dynamic target SIRs instead of a fixed target SIR. In the research literature, the power control problem has been modeled using game theory. A limitation of the current literature is that in order to implement the algorithms, each MS needs to know information such as path gains and transmission rates of all other MSs. Fast rate control schemes in the evolving cellular data systems such as cdma2000-1x-EV assign transmission rates to MSs using a probabilistic approach. The limitation here is that the radio resources can be either under or over-utilized. Further, all MSs are not assigned the same rates. In the schemes proposed in the literature, only few MSs, which have the best channel conditions, obtain all radio resources. In this dissertation, we address the power control issue by moving the computation of the Nash equilibrium from each MS to the base station (BS). We also propose equal radio resource allocation for all MSs under the constraint that only the maximum allowable radio resources are used in a cell. This dissertation addresses the problem of how to efficiently assign power and rate to MSs based on dynamic target SIRs for bursty transmissions. The proposed schemes in this work maximize the throughput of each data-MS while still providing equal allocation of radio resources to all MSs and achieving full radio resource utilization in each cell. The proposed schemes result in power and rate control algorithms that however require some assistance from the BS. The performance evaluation and comparisons with cdma2000-1x-Evolution Data Only (1x-EV-DO) show that the proposed schemes can provide better effective rates (rates after error) than the existing schemes

Automatic loss adjustment for CDMA2000 and 1xEV-DO standard for downlink and uplink

The functional and thermal testing of the mobile phone is always performed under various conditions that vary in terms of the connection between the DUT (Device Under Test) and the measuring instrument. To achieve repeatable measurements under such conditions, it is necessary to adjust uplink and downlink loss using the instrument's external attenuation. While for GSM, WCDMA and LTE this is a relatively easy task, CDMA2000 and 1xEV-DO make automation of the adjustment process somewhat challenging due to the nature of the CDMA standard. An especially forward link is more complicated as those tests are run in signaling mode and not all instruments provide an FER value measured by an MS. This paper describes the algorithm for forward link loss adjustment and its implementation using Rohde & Schwarz CMW500

The 3G standard setting strategy and indigenous innovation policy in China is TD-SCDMA a flagship?

In the time of “network economy”, industries and the public have stressed several “battles for dominance” between two or more rival technologies, often involving well-known firms operating in highly visible industries. In this paper, we are going to focus on the Chinese self-developed standard TD-SCDMA to perceive the implication and target of the nation’s policy and strategy. The motivation of the research starts from the interesting fact we observed: TD-SCDMA is named as the Chinese made standard, however the Chinese hold core patent technology is still about 7%, while most of the rest part is still taken by other foreign companies. The “faultage” between the small share reality and a self made standard sweet dream implies a well plotted strategy. In order to understand it, we firstly raise the question of why the Chinese government postpones the 3G decision again and again. Then we go further to probe why the standard-setting of TD-SCDMA has aroused wide attention as a strategic tool to fulfill “indigenous innovation”, and finally becomes part of national science and technology policy to increase international competitiveness? We are going to use economics theories to understand the essence of the creation of TD-SCDMA, and its relation to China’s interests.3G, standard, innovation, China

The Future of Mobile Industry

This paper discusses the future of mobile industry along with some of the background leading to the emergence of wireless technology. First, it gives an overview of today’s telecommunication network and the major differences between fixed wired networks and wireless networks. The discussion then focuses on the challenges facing the wireless industry and the way out through aggressive innovation by employing Wireless Intelligence Network (WIN) technology. The paper also discusses some important trends in wireless industry and the customers expectations which are also part of the challenges for the mobile industry. Finally particular reference is made to the developing nations especially Nigeria in the ongoing trends in mobile communication industry

Quality of service and channel-aware packet bundling for capacity improvement in cellular networks

Title from PDF of title page, viewed on May 26, 2011VitaIncludes bibliographical references (p. 76-84)Thesis (Ph.D.)--School of Computing and Engineering. University of Missouri--Kansas City, 2011We study the problem of multiple packet bundling to improve spectral efficiency in cellular networks. The packet size of real-time data, such as VoIP, is often very small. However, the common use of time division multiplexing limits the number of VoIP users supported, because a packet has to wait until it receives a time slot, and if only one small VoIP packet is placed in a time slot, capacity is wasted. Packet bundling can alleviate such a problem by sharing a time slot among multiple users. A recent revision of cdma2000 1xEV-DO introduced the concept of the multi-user packet (MUP) in the downlink to overcome limitations on the number of time slots. However, the efficacy of packet bundling is not well understood, particularly in the presence of time varying channels. We propose a novel QoS and channel-aware packet bundling algorithm that takes advantage of adaptive modulation and coding. We show that optimal algorithms are NP complete and recommend heuristic approaches. We also show that channel utilization can be significantly increased by slightly delaying some real-time packets within their QoS requirements while bundling those packets with like channel conditions. We validate our study through extensive OPNET simulations with a complete EV-DO implementation.Introduction -- Related work -- Background on wireless systems -- Multiple packet bundling -- Evaluation -- Conclusion

A General Framework for Analyzing, Characterizing, and Implementing Spectrally Modulated, Spectrally Encoded Signals

Fourth generation (4G) communications will support many capabilities while providing universal, high speed access. One potential enabler for these capabilities is software defined radio (SDR). When controlled by cognitive radio (CR) principles, the required waveform diversity is achieved via a synergistic union called CR-based SDR. Research is rapidly progressing in SDR hardware and software venues, but current CR-based SDR research lacks the theoretical foundation and analytic framework to permit efficient implementation. This limitation is addressed here by introducing a general framework for analyzing, characterizing, and implementing spectrally modulated, spectrally encoded (SMSE) signals within CR-based SDR architectures. Given orthogonal frequency division multiplexing (OFDM) is a 4G candidate signal, OFDM-based signals are collectively classified as SMSE since modulation and encoding are spectrally applied. The proposed framework provides analytic commonality and unification of SMSE signals. Applicability is first shown for candidate 4G signals, and resultant analytic expressions agree with published results. Implementability is then demonstrated in multiple coexistence scenarios via modeling and simulation to reinforce practical utility

A Unified Mobility Management Architecture for Interworked Heterogeneous Mobile Networks

The buzzword of this decade has been convergence: the convergence of telecommunications, Internet, entertainment, and information technologies for the seamless provisioning of multimedia services across different network types. Thus the future Next Generation Mobile Network (NGMN) can be envisioned as a group of co-existing heterogeneous mobile data networking technologies sharing a common Internet Protocol (IP) based backbone. In such all-IP based heterogeneous networking environments, ongoing sessions from roaming users are subjected to frequent vertical handoffs across network boundaries. Therefore, ensuring uninterrupted service continuity during session handoffs requires successful mobility and session management mechanisms to be implemented in these participating access networks. Therefore, it is essential for a common interworking framework to be in place for ensuring seamless service continuity over dissimilar networks to enable a potential user to freely roam from one network to another. For the best of our knowledge, the need for a suitable unified mobility and session management framework for the NGMN has not been successfully addressed as yet. This can be seen as the primary motivation of this research. Therefore, the key objectives of this thesis can be stated as: To propose a mobility-aware novel architecture for interworking between heterogeneous mobile data networks To propose a framework for facilitating unified real-time session management (inclusive of session establishment and seamless session handoff) across these different networks. In order to achieve the above goals, an interworking architecture is designed by incorporating the IP Multimedia Subsystem (IMS) as the coupling mediator between dissipate mobile data networking technologies. Subsequently, two different mobility management frameworks are proposed and implemented over the initial interworking architectural design. The first mobility management framework is fully handled by the IMS at the Application Layer. This framework is primarily dependant on the IMS’s default session management protocol, which is the Session Initiation Protocol (SIP). The second framework is a combined method based on SIP and the Mobile IP (MIP) protocols, which is essentially operated at the Network Layer. An analytical model is derived for evaluating the proposed scheme for analyzing the network Quality of Service (QoS) metrics and measures involved in session mobility management for the proposed mobility management frameworks. More precisely, these analyzed QoS metrics include vertical handoff delay, transient packet loss, jitter, and signaling overhead/cost. The results of the QoS analysis indicates that a MIP-SIP based mobility management framework performs better than its predecessor, the Pure-SIP based mobility management method. Also, the analysis results indicate that the QoS performances for the investigated parameters are within acceptable levels for real-time VoIP conversations. An OPNET based simulation platform is also used for modeling the proposed mobility management frameworks. All simulated scenarios prove to be capable of performing successful VoIP session handoffs between dissimilar networks whilst maintaining acceptable QoS levels. Lastly, based on the findings, the contributions made by this thesis can be summarized as: The development of a novel framework for interworked heterogeneous mobile data networks in a NGMN environment. The final design conveniently enables 3G cellular technologies (such as the Universal Mobile Telecommunications Systems (UMTS) or Code Division Multiple Access 2000 (CDMA2000) type systems), Wireless Local Area Networking (WLAN) technologies, and Wireless Metropolitan Area Networking (WMAN) technologies (e.g., Broadband Wireless Access (BWA) systems such as WiMAX) to interwork under a common signaling platform. The introduction of a novel unified/centralized mobility and session management platform by exploiting the IMS as a universal coupling mediator for real-time session negotiation and management. This enables a roaming user to seamlessly handoff sessions between different heterogeneous networks. As secondary outcomes of this thesis, an analytical framework and an OPNET simulation framework are developed for analyzing vertical handoff performance. This OPNET simulation platform is suitable for commercial use