227 research outputs found
Replica determinism and flexible scheduling in hard real-time dependable systems
Fault-tolerant real-time systems are typically based on active replication where replicated entities are required to deliver their outputs in an identical order within a given time interval. Distributed scheduling of replicated tasks, however, violates this requirement if on-line scheduling, preemptive scheduling, or scheduling of dissimilar replicated task sets is employed. This problem of inconsistent task outputs has been solved previously by coordinating the decisions of the local schedulers such that replicated tasks are executed in an identical order. Global coordination results either in an extremely high communication effort to agree on each schedule decision or in an overly restrictive execution model where on-line scheduling, arbitrary preemptions, and nonidentically replicated task sets are not allowed. To overcome these restrictions, a new method, called timed messages, is introduced. Timed messages guarantee deterministic operation by presenting consistent message versions to the replicated tasks. This approach is based on simulated common knowledge and a sparse time base. Timed messages are very effective since they neither require communication between the local scheduler nor do they restrict usage of on-line flexible scheduling, preemptions and nonidentically replicated task sets
An architecture for reliable distributed computer-controlled systems
In Distributed Computer-Controlled Systems (DCCS), both real-time and reliability
requirements are of major concern. Architectures for DCCS must be designed
considering the integration of processing nodes and the underlying communication
infrastructure. Such integration must be provided by appropriate software support
services.
In this paper, an architecture for DCCS is presented, its structure is outlined, and
the services provided by the support software are presented. These are considered in
order to guarantee the real-time and reliability requirements placed by current and
future systems
Operating System Support for Redundant Multithreading
Failing hardware is a fact and trends in microprocessor design indicate that the fraction of hardware suffering from permanent and transient faults will continue to increase in future chip generations. Researchers proposed various solutions to this issue with different downsides: Specialized hardware components make hardware more expensive in production and consume additional energy at runtime. Fault-tolerant algorithms and libraries enforce specific programming models on the developer. Compiler-based fault tolerance requires the source code for all applications to be available for recompilation. In this thesis I present ASTEROID, an operating system architecture that integrates applications with different reliability needs.
ASTEROID is built on top of the L4/Fiasco.OC microkernel and extends the system with Romain, an operating system service that transparently replicates user applications. Romain supports single- and multi-threaded applications without requiring access to the application's source code. Romain replicates applications and their resources completely and thereby does not rely on hardware extensions, such as ECC-protected memory. In my thesis I describe how to efficiently implement replication as a form of redundant multithreading in software. I develop mechanisms to manage replica resources and to make multi-threaded programs behave deterministically for replication.
I furthermore present an approach to handle applications that use shared-memory channels with other programs. My evaluation shows that Romain provides 100% error detection and more than 99.6% error correction for single-bit flips in memory and general-purpose registers. At the same time, Romain's execution time overhead is below 14% for single-threaded applications running in triple-modular redundant mode. The last part of my thesis acknowledges that software-implemented fault tolerance methods often rely on the correct functioning of a certain set of hardware and software components, the Reliable Computing Base (RCB).
I introduce the concept of the RCB and discuss what constitutes the RCB of the ASTEROID system and other fault tolerance mechanisms. Thereafter I show three case studies that evaluate approaches to protecting RCB components and thereby aim to achieve a software stack that is fully protected against hardware errors
Tolerância a falhas em sistemas de comunicação de tempo-real flexÃveis
Nas últimas décadas, os sistemas embutidos distribuÃdos, têm sido usados em
variados domÃnios de aplicação, desde o controlo de processos industriais até
ao controlo de aviões e automóveis, sendo expectável que esta tendência se
mantenha e até se intensifique durante os próximos anos.
Os requisitos de confiabilidade de algumas destas aplicações são
extremamente importantes, visto que o não cumprimento de serviços de uma
forma previsÃvel e pontual pode causar graves danos económicos ou até pôr
em risco vidas humanas.
A adopção das melhores práticas de projecto no desenvolvimento destes
sistemas não elimina, por si só, a ocorrência de falhas causadas pelo
comportamento não determinÃstico do ambiente onde o sistema embutido
distribuÃdo operará. Desta forma, é necessário incluir mecanismos de
tolerância a falhas que impeçam que eventuais falhas possam comprometer
todo o sistema.
Contudo, para serem eficazes, os mecanismos de tolerância a falhas
necessitam ter conhecimento a priori do comportamento correcto do sistema
de modo a poderem ser capazes de distinguir os modos correctos de
funcionamento dos incorrectos.
Tradicionalmente, quando se projectam mecanismos de tolerância a falhas, o
conhecimento a priori significa que todos os possÃveis modos de
funcionamento são conhecidos na fase de projecto, não os podendo adaptar
nem fazer evoluir durante a operação do sistema. Como consequência, os
sistemas projectados de acordo com este princÃpio ou são completamente
estáticos ou permitem apenas um pequeno número de modos de operação.
Contudo, é desejável que os sistemas disponham de alguma flexibilidade de
modo a suportarem a evolução dos requisitos durante a fase de operação,
simplificar a manutenção e reparação, bem como melhorar a eficiência usando
apenas os recursos do sistema que são efectivamente necessários em cada
instante. Além disto, esta eficiência pode ter um impacto positivo no custo do
sistema, em virtude deste poder disponibilizar mais funcionalidades com o
mesmo custo ou a mesma funcionalidade a um menor custo.
Porém, flexibilidade e confiabilidade têm sido encarados como conceitos
conflituais.
Isto deve-se ao facto de flexibilidade implicar a capacidade de permitir a
evolução dos requisitos que, por sua vez, podem levar a cenários de operação
imprevisÃveis e possivelmente inseguros. Desta fora, é comummente aceite
que apenas um sistema completamente estático pode ser tornado confiável, o
que significa que todos os aspectos operacionais têm de ser completamente
definidos durante a fase de projecto.
Num sentido lato, esta constatação é verdadeira. Contudo, se os modos como
o sistema se adapta a requisitos evolutivos puderem ser restringidos e
controlados, então talvez seja possÃvel garantir a confiabilidade permanente
apesar das alterações aos requisitos durante a fase de operação.
A tese suportada por esta dissertação defende que é possÃvel flexibilizar um
sistema, dentro de limites bem definidos, sem comprometer a sua
confiabilidade e propõe alguns mecanismos que permitem a construção de
sistemas de segurança crÃtica baseados no protocolo Controller Area Network
(CAN). Mais concretamente, o foco principal deste trabalho incide sobre o
protocolo Flexible Time-Triggered CAN (FTT-CAN), que foi especialmente
desenvolvido para disponibilizar um grande nÃvel de flexibilidade operacional
combinando, não só as vantagens dos paradigmas de transmissão de
mensagens baseados em eventos e em tempo, mas também a flexibilidade
associada ao escalonamento dinâmico do tráfego cuja transmissão é
despoletada apenas pela evolução do tempo.
Este facto condiciona e torna mais complexo o desenvolvimento de
mecanismos de tolerância a falhas para FTT-CAN do que para outros
protocolos como por exemplo, TTCAN ou FlexRay, nos quais existe um
conhecimento estático, antecipado e comum a todos os nodos, do
escalonamento de mensagens cuja transmissão é despoletada pela evolução
do tempo.
Contudo, e apesar desta complexidade adicional, este trabalho demonstra que
é possÃvel construir mecanismos de tolerância a falhas para FTT-CAN
preservando a sua flexibilidade operacional.
É também defendido nesta dissertação que um sistema baseado no protocolo
FTT-CAN e equipado com os mecanismos de tolerância a falhas propostos é
passÃvel de ser usado em aplicações de segurança crÃtica.
Esta afirmação é suportada, no âmbito do protocolo FTT-CAN, através da
definição de uma arquitectura tolerante a falhas integrando nodos com modos
de falha tipo falha-silêncio e nodos mestre replicados.
Os vários problemas resultantes da replicação dos nodos mestre são, também
eles, analisados e várias soluções são propostas para os obviar.
Concretamente, é proposto um protocolo que garante a consistência das
estruturas de dados replicadas a quando da sua actualização e um outro
protocolo que permite a transferência dessas estruturas de dados para um
nodo mestre que se encontre não sincronizado com os restantes depois de
inicializado ou reinicializado de modo assÃncrono.
Além disto, esta dissertação também discute o projecto de nodos FTT-CAN
que exibam um modo de falha do tipo falha-silêncio e propõe duas soluções
baseadas em componentes de hardware localizados no interface de rede de
cada nodo, para resolver este problema. Uma das soluções propostas baseiase
em bus guardians que permitem a imposição de comportamento falhasilêncio
nos nodos escravos e suportam o escalonamento dinâmico de tráfego
na rede. A outra solução baseia-se num interface de rede que arbitra o acesso
de dois microprocessadores ao barramento. Este interface permite que a
replicação interna de um nodo seja efectuada de forma transparente e
assegura um comportamento falha-silêncio quer no domÃnio temporal quer no
domÃnio do valor ao permitir transmissões do nodo apenas quando ambas as
réplicas coincidam no conteúdo das mensagens e nos instantes de
transmissão. Esta última solução está mais adaptada para ser usada nos
nodos mestre, contudo também poderá ser usada nos nodos escravo, sempre
que tal se revele fundamental.Distributed embedded systems (DES) have been widely used in the last few
decades in several application fields, ranging from industrial process control to
avionics and automotive systems. In fact, it is expectable that this trend will
continue over the years to come.
In some of these application domains the dependability requirements are of
utmost importance since failing to provide services in a timely and predictable
manner may cause important economic losses or even put human life in risk.
The adoption of the best practices in the design of distributed embedded
systems does not fully avoid the occurrence of faults, arising from the nondeterministic
behavior of the environment where each particular DES operates.
Thus, fault-tolerance mechanisms need to be included in the DES to prevent
possible faults leading to system failure.
To be effective, fault-tolerance mechanisms require an a priori knowledge of
the correct system behavior to be capable of distinguishing them from the
erroneous ones.
Traditionally, when designing fault-tolerance mechanisms, the a priori
knowledge means that all possible operational modes are known at system
design time and cannot adapt nor evolve during runtime. As a consequence,
systems designed according to this principle are either fully static or allow a
small number of operational modes only. Flexibility, however, is a desired
property in a system in order to support evolving requirements, simplify
maintenance and repair, and improve the efficiency in using system resources
by using only the resources that are effectively required at each instant. This
efficiency might impact positively on the system cost because with the same
resources one can add more functionality or one can offer the same
functionality with fewer resources.
However, flexibility and dependability are often regarded as conflicting
concepts. This is so because flexibility implies the ability to deal with evolving
requirements that, in turn, can lead to unpredictable and possibly unsafe
operating scenarios. Therefore, it is commonly accepted that only a fully static
system can be made dependable, meaning that all operating conditions are
completely defined at pre-runtime.
In the broad sense and assuming unbounded flexibility this assessment is true,
but if one restricts and controls the ways the system could adapt to evolving
requirements, then it might be possible to enforce continuous dependability.
This thesis claims that it is possible to provide a bounded degree of flexibility
without compromising dependability and proposes some mechanisms to build
safety-critical systems based on the Controller Area Network (CAN).
In particular, the main focus of this work is the Flexible Time-Triggered CAN
protocol (FTT-CAN), which was specifically developed to provide such high
level of operational flexibility, not only combining the advantages of time- and
event-triggered paradigms but also providing flexibility to the time-triggered
traffic. This fact makes the development of fault-tolerant mechanisms more
complex in FTT-CAN than in other protocols, such as TTCAN or FlexRay, in
which there is a priori static common knowledge of the time-triggered message
schedule shared by all nodes. Nevertheless, as it is demonstrated in this work,
it is possible to build fault-tolerant mechanisms for FTT-CAN that preserve its
high level of operational flexibility, particularly concerning the time-triggered
traffic. With such mechanisms it is argued that FTT-CAN is suitable for safetycritical
applications, too.
This claim was validated in the scope of the FTT-CAN protocol by presenting a
fault-tolerant system architecture with replicated masters and fail-silent nodes.
The specific problems and mechanisms related with master replication,
particularly a protocol to enforce consistency during updates of replicated data
structures and another protocol to transfer these data structures to an
unsynchronized node upon asynchronous startup or restart, are also
addressed.
Moreover, this thesis also discusses the implementations of fail-silence in FTTCAN
nodes and proposes two solutions, both based on hardware components
that are attached to the node network interface. One solution relies on bus
guardians that allow enforcing fail-silence in the time domain. These bus
guardians are adapted to support dynamic traffic scheduling and are fit for use
in FTT-CAN slave nodes, only. The other solution relies on a special network
interface, with duplicated microprocessor interface, that supports internal
replication of the node, transparently. In this case, fail-silence can be assured
both in the time and value domain since transmissions are carried out only if
both internal nodes agree on the transmission instant and message contents.
This solution is well adapted for use in the masters but it can also be used, if
desired, in slave nodes
Replication and fault-tolerance in real-time systems
PhD ThesisThe increased availability of sophisticated computer hardware and the corresponding
decrease in its cost has led to a widespread growth in the use of computer systems for realtime
plant and process control applications. Such applications typically place very high
demands upon computer control systems and the development of appropriate control
software for these application areas can present a number of problems not normally
encountered in other applications.
First of all, real-time applications must be correct in the time domain as well as the value
domain: returning results which are not only correct but also delivered on time. Further,
since the potential for catastrophic failures can be high in a process or plant control
environment, many real-time applications also have to meet high reliability requirements.
These requirements will typically be met by means of a combination of fault avoidance and
fault tolerance techniques.
This thesis is intended to address some of the problems encountered in the provision of fault
tolerance in real-time applications programs. Specifically,it considers the use of replication
to ensure the availability of services in real-time systems. In a real-time environment,
providing support for replicated services can introduce a number of problems. In particular,
the scope for non-deterministic behaviour in real-time applications can be quite large and
this can lead to difficultiesin maintainingconsistent internal states across the members of a
replica group. To tackle this problem, a model is proposed for fault tolerant real-time
objects which not only allows such objects to perform application specific recovery
operations and real-time processing activities such as event handling, but which also allows
objects to be replicated. The architectural support required for such replicated objects is
also discussed and, to conclude, the run-time overheads associated with the use of such
replicated services are considered.The Science and Engineering Research Council
Comunicações confiáveis sem-fios para redes veiculares
Vehicular communications are a promising field of research, with numerous
potential services that can enhance traffic experience. Road safety is the
most important objective behind the development of wireless vehicular networks,
since many of the current accidents and fatalities could be avoided if
vehicles had the ability to share information among them, with the road-side
infrastructure and other road users.
A future with safe, efficient and comfortable road transportation systems is envisaged
by the different traffic stakeholders - users, manufacturers, road operators
and public authorities. Cooperative Intelligent Transportation Systems
(ITS) applications will contribute to achieve this goal, as well as other technological
progress, such as automated driving or improved road infrastructure
based on advanced sensoring and the Internet of Things (IoT) paradigm.
Despite these significant benefits, the design of vehicular communications
systems poses difficult challenges, mainly due to the very dynamic environments
in which they operate. In order to attain the safety-critical requirements
involved in this type of scenarios, careful planning is necessary, so that a trustworthy
behaviour of the system can be achieved. Dependability and real-time
systems concepts provide essential tools to handle this challenging task of
enabling determinism and fault-tolerance in vehicular networks.
This thesis aims to address some of these issues by proposing architectures
and implementing mechanisms that improve the dependability levels of realtime
vehicular communications. The developed strategies always try to preserve
the required system’s flexibity, a fundamental property in such unpredictable
scenarios, where unexpected events may occur and force the system
to quickly adapt to the new circumnstances.The core contribution of this thesis focuses on the design of a fault-tolerant architecture
for infrastructure-based vehicular networks. It encompasses a set
of mechanisms that allow error detection and fault-tolerant behaviour both in
the mobile and static nodes of the network. Road-side infrastructure plays
a key role in this context, since it provides the support for coordinating all
communications taking place in the wireless medium. Furthermore, it is also
responsible for admission control policies and exchanging information with the
backbone network. The proposed methods rely on a deterministic medium
access control (MAC) protocol that provides real-time guarantees in wireless
channel access, ensuring that communications take place before a given deadline.
However, the presented solutions are generic and can be easily adapted
to other protocols and wireless technologies.
Interference mitigation techniques, mechanisms to enforce fail-silent behaviour
and redundancy schemes are introduced in this work, so that vehicular
communications systems may present higher dependability levels. In addition
to this, all of these methods are included in the design of vehicular network
components, guaranteeing that the real-time constraints are still fulfilled.
In conclusion, wireless vehicular networks hold the potential to drastically improve
road safety. However, these systems should present dependable behaviour
in order to reliably prevent the occurrence of catastrophic events under
all possible traffic scenarios.As comunicações veiculares são uma área de investigação bastante promissora,
com inúmeros potenciais serviços que podem melhorar a experiência
vivida no tráfego. A segurança rodoviária é o objectivo mais importante por
detrás do desenvolvimento das redes veiculares sem-fios, visto que muitos
dos atuais acidentes e vÃtimas mortais poderiam ser evitados caso os veÃculos
tivessem a capacidade de trocar informação entre eles, com a infraestrutura
rodoviária e outros utilizadores da estrada.
Um futuro com sistemas de transporte rodoviário seguros, eficientes e confortáveis
é algo ambicionado pelas diferentes partes envolvidas - utilizadores, fabricantes,
operadores da infraestrutura e autoridades públicas. As aplicações
de Sistemas Inteligentes de Transporte (ITS) cooperativas vão contribuir para
alcançar este propósito, em conjunto com outros avanços tecnológicos, nomeadamente
a condução autónoma ou uma melhor infraestrutura rodoviária
baseada em sensorização avançada e no paradigma da Internet das Coisas
(IoT).
Apesar destes benefÃcios significativos, o desenho de sistemas de comunicações
veiculares coloca desafios difÃceis, em grande parte devido aos ambientes
extremamente dinâmicos em que estes operam. De modo a atingir
os requisitos de segurança crÃtica envolvidos neste tipo de cenários, é necessário
um cuidadoso planeamento por forma a que o sistema apresente um
comportamento confiável. Conceitos de dependabilidade e de sistemas de
tempo-real constituem ferramentas essenciais para lidar com esta desafiante
tarefa de dotar as redes veiculares de determinismo e tolerância a faltas.
Esta tese pretende endereçar alguns destes problemas através da proposta
de arquitecturas e da implementação de mecanismos que melhorem os nÃveis
da dependabilidade das comunicações veiculares de tempo-real. As estratégias
desenvolvidas tentam sempre preservar a necessária flexibilidade do
sistema, uma propriedade fundamental em cenários tão imprevisÃveis, onde
eventos inesperados podem ocorrer e forçar o sistema a adaptar-se rapidamente
às novas circunstâncias.A contribuição principal desta tese foca-se no desenho de uma arquitectura
tolerante a faltas para redes veiculares com suporte da infraestrutura de beira
de estrada. Esta arquitectura engloba um conjunto de mecanismos que permite
detecção de erros e comportamento tolerante a faltas, tanto nos nós móveis
como nos nós estáticos da rede. A infraestrutura de beira de estrada desempenha
um papel fundamental neste contexto, pois fornece o suporte que
permite coordenar todas as comunicações que ocorrem no meio sem-fios.
Para além disso, é também responsável pelos mecanismos de controlo de
admissão e pela troca de informação com a rede de transporte. Os métodos
propostos baseiam-se num protocolo determinÃstico de controlo de acesso ao
meio (MAC) que fornece garantias de tempo-real no accesso ao canal semfios,
assegurando que as comunicações ocorrem antes de um determinado
limite temporal. No entanto, as soluções apresentadas são genéricas e podem
ser facilmente adaptadas a outros protocolos e tecnologias sem-fios.
Neste trabalho são introduzidas técnicas de mitigação de interferência, mecanismos
para assegurar comportamento falha-silêncio e esquemas de redundância,
de modo a que os sistemas de comunicações veiculares apresentem
elevados nÃveis de dependabilidade. Além disso, todos estes métodos são incorporados
no desenho dos componentes da rede veicular, guarantindo que
as restrições de tempo-real continuam a ser cumpridas.
Em suma, as redes veiculares sem-fios têm o potential para melhorar drasticamente
a segurança rodoviária. Contudo, estes sistemas precisam de apresentar
um comportamento confiável, de forma a prevenir a ocorrência de
eventos catastróficos em todos os cenários de tráfego possÃveis.Programa Doutoral em Telecomunicaçõe
- …