Highway Vehicular Delay Tolerant Networks: Information Propagation Speed Properties

International audienceIn this paper, we provide a full analysis of the information propagation speed in bidirectional vehicular delay tolerant networks such as roads or highways. The provided analysis shows that a phase transition occurs concerning the information propagation speed, with respect to the vehicle densities in each direction of the highway. We prove that under a certain threshold, information propagates on average at vehicle speed, while above this threshold, information propagates dramatically faster at a speed that increases quasi-exponentially when the vehicle density increases. We provide the exact expressions of the threshold and of the average information propagation speed near the threshold, in case of finite or infinite radio propagation speed. Furthermore, we investigate in detail the way information propagates under the threshold, and we prove that delay tolerant routing using cars moving on both directions provides a gain in propagation distance, which is bounded by a sub-linear power law with respect to the elapsed time, in the referential of the moving cars. Combining these results, we thus obtain a complete picture of the way information propagates in vehicular networks on roads and highways, which may help designing and evaluating appropriate VANET routing protocols. We confirm our analytical results using simulations carried out in several environments (The One and Maple)

Faster Information Propagation on Highways: a Virtual MIMO Approach

In vehicular communications, traffic-related information should be spread over the network as quickly as possible to maintain a safe and reliable transportation system. This motivates us to develop more efficient information propagation schemes. In this paper, we propose a novel cluster-based cooperative information forwarding scheme, in which the vehicles opportunistically form virtual antenna arrays to boost one-hop transmission range and therefore accelerate information propagation along the highway. Both closed-form results of the transmission range gain and the improved Information Propagation Speed (IPS) are derived and verified by simulations. It is observed that the proposed scheme demonstrates the most significant IPS gain in moderate traffic scenarios, whereas too dense or too sparse vehicle density results in less gain. Moreover, it is also shown that increased mobility offers more contact opportunities and thus facilitates information propagation.Comment: IEEE 2014 Global Telecommunications Conference (GLOBECOM 2014) - Communication Theory Symposiu

Named Data Networking in Vehicular Ad hoc Networks: State-of-the-Art and Challenges

International audienceInformation-Centric Networking (ICN) has been proposed as one of the future Internet architectures. It is poised to address the challenges faced by today's Internet that include, but not limited to, scalability, addressing, security, and privacy. Furthermore, it also aims at meeting the requirements for new emerging Internet applications. To realize ICN, Named Data Networking (NDN) is one of the recent implementations of ICN that provides a suitable communication approach due to its clean slate design and simple communication model. There are a plethora of applications realized through ICN in different domains where data is the focal point of communication. One such domain is Intelligent Transportation System (ITS) realized through Vehicular Ad hoc NETwork (VANET) where vehicles exchange information and content with each other and with the infrastructure. To date, excellent research results have been yielded in the VANET domain aiming at safe, reliable, and infotainment-rich driving experience. However, due to the dynamic topologies, host-centric model, and ephemeral nature of vehicular communication, various challenges are faced by VANET that hinder the realization of successful vehicular networks and adversely affect the data dissemination, content delivery, and user experiences. To fill these gaps, NDN has been extensively used as underlying communication paradigm for VANET. Inspired by the extensive research results in NDN-based VANET, in this paper, we provide a detailed and systematic review of NDN-driven VANET. More precisely, we investigate the role of NDN in VANET and discuss the feasibility of NDN architecture in VANET environment. Subsequently, we cover in detail, NDN-based naming, routing and forwarding, caching, mobility, and security mechanism for VANET. Furthermore, we discuss the existing standards, solutions, and simulation tools used in NDN-based VANET. Finally, we also identify open challenges and issues faced by NDN-driven VANET and highlight future research directions that should be addressed by the research community

QoSHVCP: hybrid vehicular communications protocol with QoS prioritization for safety applications

This paper introduces a hybrid communication paradigm for achieving seamless connectivity in Vehicular Ad hoc Networks (VANETs), wherein the connectivity is often affected by changes in the dynamic topology, vehicles' speed, as well as the traffic density. Our proposed technique named QoS-oriented Hybrid Vehicular Communications Protocol (QoSHVCP) exploits both existing network infrastructure through a Vehicle-to-Infrastructure (V2I), as well as a traditional Vehicle-to-Vehicle (V2V) connection that could satisfy Quality-of-Service requirements. QoSHVCP is based on a V2V-V2I protocol switching algorithm, executed in a distributed fashion by each vehicle and is based on the cost function for alternative paths each time it needs to transmit a message. We utilize time delay as a performance metric and present the delay propagation rates when vehicles are transmitting high priority messages via QoSHVCP. Simulation results indicate that simultaneous usage of preexisting network infrastructure along with intervehicular communication provide lower delays, while maintaining the level of user's performance. Our results show a great promise for their future use in VANETs

Connected Vehicle Technology: User and System Performance Characteristics

The emerging connected vehicle (CV) technology plays a promising role in providing more operable and safer transportation environments. Yet, many questions remain unanswered as to how various user and system characteristics of CV-enabled networks can shape the successful implementation of the technology to maximize the return on investment. This research attempts to capture the effect of multiple factors such as traffic density, market penetration, and transmission range on the communication stability and overall network performance by developing a new CONnectivity ROBustness (CONROB) model. The model was tested with data collected from microscopic simulation of a 195 sq-mile traffic network and showed a potential to capture the effect of such factors on the communication stability in CV environments. The information exchanged among CVs can also be used to estimate traffic conditions in real time by invoking the probe vehicle feature of CV technology. Since factors affecting the connectivity robustness also have an impact on the performance of traffic condition estimation models, a direct relationship between connectivity robustness and traffic condition estimation performance was established. Simulation results show that the CONROB model can be used as a tool to predict the accuracy of the estimated traffic conditions (e.g. travel times), as well as the reliability of such estimates, given specific system characteristics. The optimal deployment of road-side units (RSUs) is another important factor that affects the communication stability and the traffic conditions estimates and reliability. Thus, an optimization approach was developed to identify the optimal RSUs locations with the objective function of maximizing the connectivity robustness. Simulation results for the developed approach show that CONROB model can help identify the optimal RSUs locations. This shows the importance of CONROB model as a planning tool for CV environments. For the individual user performance characteristics, a preliminary driving simulator test bed for CV technology was developed and tested on thirty licensed drivers. Forward collision warning messages were delivered to drivers when predefined time-to-collision values take place. The findings show improved reaction times of drivers when receiving the warning messages which lend credence to the safety benefits of the CV technology

Controlo de acesso ao meio em comunicações veiculares de tempo-real

Despite several preventive measures, the number of roadway accidents is still very high, being considered even a problem of public health by some entities. This thesis has as global purpose of contributing to the reduction of that number of accidents, and consequent fatalities, by using safety-related applications that use communication among vehicles. In particular, the primary goal is guaranteeing that communication between users in vehicular environments is done with appropriate time bounds to transfer safety-critical information. In detail, it is studied how to manage the scheduling of message’s transmissions (medium access control - MAC), in order to define precisely who will communicate and when is the appropriate instant. The preferable situation where a communication infrastructure is present with full coverage (RSUs) is also studied, from which medium access control is defined precisely, and vehicles (OBUs) become aware of medium utilization. Also, sporadic situations (e.g., absence of RSUs) are studied in which the communication network is “ad hoc” and solely formed by the current vehicles. It is used the recently WAVE / IEEE 802.11p standard, specific for vehicular communications, and it is proposed a TDMA based solution, with appropriate coordination between RSUs in order to effectively disseminate a critical safety event. It is taken into account two different ways of choosing the instant for the initial broadcast, and both cases are compared. In case there is no infrastructure available, methods are derived to minimize communication medium access collisions, and to maximize the available bandwidth. The results reflect the total end-to-end delay, and show that adequate times are attained, and meet with the requisites for the type of applications being considered. Also, enhancements are obtained when using the alternate choice for the initial broadcast instant.Apesar de diversas medidas preventivas, o número de acidentes rodoviários continua a ser muito elevado, sendo mesmo considerado uma questão de saúde pública por algumas entidades. Esta tese tem como objetivo geral contribuir para a redução desse número de acidentes, e consequentes fatalidades, através da utilização de aplicações de segurança que envolvem comunicação entre veículos. Em particular, o objetivo principal é garantir que a comunicação entre utentes, em ambientes veiculares, seja efetuada com limites temporais apropriados à transferência de informações críticas. De forma mais detalhada, é estudada a gestão do escalonamento das transmissões (controlo de acesso ao meio – MAC) que irá definir quem vai comunicar e quando o pode fazer. São estudadas situações (desejadas) onde há uma infra-estrutura de comunicações com cobertura integral (RSUs), a partir da qual se faz a coordenação do acesso ao meio pelos veículos (OBUs), e situações (esporádicas, por ausência de RSU) em que a rede de comunicação é “ad hoc” e apenas constituída pelos veículos presentes. Utiliza-se a recente norma WAVE / IEEE 802.11p, específica para comunicações veiculares, e propõe-se uma solução baseada em TDMA, com coordenação apropriada entre RSUs para disseminação efetiva de um evento crítico de segurança. A escolha do instante para o broadcast inicial do evento de segurança também é tida em conta, e são comparados dois casos distintos. No caso da ausência de infraestrutura, derivam-se métodos para minimizar colisões no acesso ao meio de comunicação, e maximizar a largura de banda disponível. Os resultados refletem o atraso total end-to-end, mostrando tempos apropriados para os requisitos das aplicações em causa, e evidenciando melhorias aquando da escolha alternativa para o instante do broadcast inicial.Programa Doutoral em Engenharia Eletrotécnic

A Survey on platoon-based vehicular cyber-physical systems

Vehicles on the road with some common interests can cooperatively form a platoon-based driving pattern, in which a vehicle follows another one and maintains a small and nearly constant distance to the preceding vehicle. It has been proved that, compared to driving individually, such a platoon-based driving pattern can significantly improve the road capacity and energy efficiency. Moreover, with the emerging vehicular adhoc network (VANET), the performance of platoon in terms of road capacity, safety and energy efficiency, etc., can be further improved. On the other hand, the physical dynamics of vehicles inside the platoon can also affect the performance of VANET. Such a complex system can be considered as a platoon-based vehicular cyber-physical system (VCPS), which has attracted significant attention recently. In this paper, we present a comprehensive survey on platoon-based VCPS. We first review the related work of platoon-based VCPS. We then introduce two elementary techniques involved in platoon-based VCPS: the vehicular networking architecture and standards, and traffic dynamics, respectively. We further discuss the fundamental issues in platoon-based VCPS, including vehicle platooning/clustering, cooperative adaptive cruise control (CACC), platoon-based vehicular communications, etc., and all of which are characterized by the tight coupled relationship between traffic dynamics and VANET behaviors. Since system verification is critical to VCPS development, we also give an overview of VCPS simulation tools. Finally, we share our view on some open issues that may lead to new research directions

Mobile Ad-Hoc Networks

Being infrastructure-less and without central administration control, wireless ad-hoc networking is playing a more and more important role in extending the coverage of traditional wireless infrastructure (cellular networks, wireless LAN, etc). This book includes state-of the-art techniques and solutions for wireless ad-hoc networks. It focuses on the following topics in ad-hoc networks: vehicular ad-hoc networks, security and caching, TCP in ad-hoc networks and emerging applications. It is targeted to provide network engineers and researchers with design guidelines for large scale wireless ad hoc networks