Location based multicast routing algorithms for wireless sensor networks

Ankara : The Department of Computer Engineering and the Institute of Engineering and Science of Bilkent University, 2007.Thesis (Master's) -- Bilkent University, 2007.Includes bibliographical references leaves 54-56Multicast routing protocols in wireless sensor networks are required for sending the same message to multiple different destination nodes. Since most of the time it is not convenient to identify the sensors in a network by a unique id, using the location information to identify the nodes and sending messages to the target locations seems to be a better approach. In this thesis we propose two different distributed algorithms for multicast routing in wireless sensor networks which make use of location information of sensor nodes. Our first algorithm groups the destination nodes according to their angular positions and sends a message toward each group in order to reduce the number of total branches in multicast tree which also reduces the number of messages transmitted. Our second algorithm calculates an Euclidean minimum spanning tree at the source node by using the positions of the target nodes. According to the calculated MST, multicast message is forwarded to destination nodes. This helps reducing the total energy consumed for delivering the message to all target nodes since it tries to minimize the number of transmissions. We compare these two algorithms with each other and also against another location based multicast routing protocol called PBM according to success ratio in delivery, number of total transmissions, traffic overhead and average end to end delay metrics. The results show that algorithms we propose are more scalable and energy efficient, so they are good candidates to be used for multicasting in wireless sensor networks.Bağcı, HakkıM.S

Improving Multicast Communications Over Wireless Mesh Networks

In wireless mesh networks (WMNs) the traditional approach to shortest path tree based multicasting is to cater for the needs of the poorest performingnode i.e. the maximum permitted multicast line rate is limited to the lowest line rate used by the individual Child nodes on a branch. In general, this meansfixing the line rate to its minimum value and fixing the transmit power to its maximum permitted value. This simplistic approach of applying a single multicast rate for all nodes in the multicast group results in a sub-optimal trade-off between the mean network throughput and coverage area that does not allow for high bandwidth multimedia applications to be supported. By relaxing this constraint and allowing multiple line rates to be used, the mean network throughput can be improved. This thesis presents two methods that aim to increase the mean network throughput through the use of multiple line rates by the forwarding nodes. This is achieved by identifying the Child nodes responsible for reducing the multicast group rate. The first method identifies specific locations for the placement of relay nodes which allows for higher multicast branch line rates to be used. The second method uses a power control algorithm to tune the transmit power to allow for higher multicast branch line rates. The use of power control also helps to reduce the interference caused to neighbouring nodes.Through extensive computer simulation it can be shown that these two methods can lead to a four-fold gain in the mean network throughput undertypical WMN operating conditions compared with the single line rate case

A Secure and Efficient Communications Architecture for Global Information Grid Users via Cooperating Space Assets

With the Information Age in full and rapid development, users expect to have global, seamless, ubiquitous, secure, and efficient communications capable of providing access to real-time applications and collaboration. The United States Department of Defense’s (DoD) Network-Centric Enterprise Services initiative, along with the notion of pushing the “power to the edge,” aims to provide end-users with maximum situational awareness, a comprehensive view of the battlespace, all within a secure networking environment. Building from previous AFIT research efforts, this research developed a novel security framework architecture to address the lack of efficient and scalable secure multicasting in the low earth orbit satellite network environment. This security framework architecture combines several key aspects of different secure group communications architectures in a new way that increases efficiency and scalability, while maintaining the overall system security level. By implementing this security architecture in a deployed environment with heterogeneous communications users, reduced re-keying frequency will result. Less frequent re-keying means more resources are available for throughput as compared to security overhead. This translates to more transparency to the end user; it will seem as if they have a “larger pipe” for their network links. As a proof of concept, this research developed and analyzed multiple mobile communication environment scenarios to demonstrate the superior re-keying advantage offered by the novel “Hubenko Security Framework Architecture” over traditional and clustered multicast security architectures. For example, in the scenario containing a heterogeneous mix of user types (Stationary, Ground, Sea, and Air), the Hubenko Architecture achieved a minimum ten-fold reduction in total keys distributed as compared to other known architectures. Another experiment demonstrated the Hubenko Architecture operated at 6% capacity while the other architectures operated at 98% capacity. In the 80% overall mobility experiment with 40% Air users, the other architectures re-keying increased 900% over the Stationary case, whereas the Hubenko Architecture only increased 65%. This new architecture is extensible to numerous secure group communications environments beyond the low earth orbit satellite network environment, including unmanned aerial vehicle swarms, wireless sensor networks, and mobile ad hoc networks

A Novel Communication Approach For Wireless Mobile Smart Objects

Tez (Doktora) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2007Thesis (PhD) -- İstanbul Technical University, Institute of Science and Technology, 2007Telsiz ağlar gezgin kullanıcılara nerede olduklarına bağlı olmadan her yerde iletişim kurma ve bilgiye erişim imkanı sağlar. Hiçbir sabit altyapıya gerek duymadan bu imkanı sağlayan tasarsız ağların zaman içinde gelişmesiyle, askeri, ticari ve özel maksatlar için tercih edilir hale gelmiştir. Diğer yandan, bilimsel ve teknolojik gelişmeler ağ elemanlarını daha küçük ve ucuz hale getirdikçe birçok uygulamanın vazgeçilmez parçaları olmuşlardır. Bu ağ elemanları, taşıyıcılara (örneğin gemiler, uçaklar, büyük araçlar, arabalar, insanlar, hayvanlar, vb.) monteli nesneler veya kendi taşıyıcısı olan (aktörler, duyargalar) nesneler olabilir. Fakat bu ağ elemanları ve uygulamalarında bir takım zorluklar yaşanmaktadır. Bu tezde, gezgin tasarsız ve duyarga ağlardaki yaşanan zorlukları ve beklentileri dikkate alarak, gezgin tasarsız ve duyarga ağlar için yeni bir özgün, durumsuz veri akış yaklaşımı ve yönlendirme algoritması önerilmektedir. Durumsuz Ağırlıklı Yönlendirme (DAY, “Stateless Weighted Routing – SWR”) algoritması olarak adlandırdığımız bu algoritma, diğer yöntemlere göre daha az yönlendirme yükü, daha az enerji tüketimi, daha az yol oluşturma gecikmesi sağlamaktadır. Veri, varışa doğru, çoklu yollar üzerinden taşınmaktadır. Çoklu yol oluşturma, güvenirliği sağlamakta, boşluk problemini büyük oranda çözmekte ve en kısa yolu da içeren daha gürbüz yollar oluşmasını sağlamaktadır. DAY aynı zamanda büyük ölçekli ağlarda da uygulanabilir. Bu amaçla, birden fazla veri toplanma düğümü (sink) içeren sürümü olan Çoklu Veri Toplanma Düğümlü- Durumsuz Ağırlıklı Yönlendirme (ÇVTD-DAY - “Multiple Sink-Stateless Weighted Routing - MS-SWR”) yöntemi de büyük ölçekli tasarsız ve duyarga ağları için önerilmiştir. ÇVTD-DAY yöntemi, DAY yönteminde herhangi bir yöntemsel ve algoritmik değişiklik yapmadan birden fazla veri toplanma düğümünün olduğu ağlarda uygulanabilir. Hem DAY, hem ÇVTD-DAY’nin başarımı benzetimler ile ölçüldü. Elde edilen sonuçlar, DAY ‘nin gezgin tasarsız ve duyarga ağlar için istenenleri karşıladığını, karşılaştırılan diğer yöntemlere göre üstün olduğunu ve olası en iyi çözüme yakınlığını, öte yandan ÇVTD-DAY‘nin de büyük ölçekli ağlarda uygulanabilir olduğunu göstermektedir.Wireless networks provide mobile user with ubiquitous communication capability and information access regardless of location. Mobile ad hoc networks, that manage it without a need to infrastructure networks, as evolved in time, become more preferable for military, commercial and special purposes. On the other hand, technological advances made network components smaller and cheaper. These network components involves a wide variety of objects such as objects mounted on crafts/platforms (e.g. ships, aircrafts, trucks, cars, humans, animals), and objects that have their own platforms (e.g. actuators, sensor nodes). However, these network components and their involved applications exhibit some challenges to implement. By considering the challenges and expectations of mobile ad hoc networks and sensor network, we propose a novel stateless data flow approach and routing algorithm namely Stateless Weighted Routing (SWR) for mobile ad hoc and sensor networks. The SWR has low routing overhead providing very low energy consumption, and has low route construction delay than other proposed schemes. Multiple paths to the destination are established for data transmission. Constructing multiple paths provides reliability, eliminates the void problem substantially, and provides more robust routes including the shortest path. The SWR is applicable to large scale networks. We propose the multiple-sink version of the SWR that is namely MS-SWR, to be used in large scale ad hoc and sensor networks with multiple sinks. The MS-SWR can be used with multiple sinks without any functional and algorithmic modification in the SWR protocol. The performance of the SWR and the MS-SWR are evaluated by simulations. The performance of the system shows that the SWR satisfies the requirements of mobile ad hoc networks and outperforms the existing algorithms. The SWR is also tested against a hypothetic routing scheme that finds the shortest available path with no cost in order to compare the performance of the SWR against such an ideal case. Tests also indicate that MS-SWR is scalable for large scale networks.DoktoraPh

Towards green communication in wireless sensor network: GA enabled distributed zone approach

[EN] Green communication in wireless sensor networks (WSNs) has witnessed significant attention due to the growing significance of sensor enabled smart environments. Energy optimization and communication optimization are two major themes of investigation for green communication. Due to the growing sensor density in smart environment, intelligently finding shortest path for green communication has been proven an NP-complete problem. Literature in green communication majorly focuses towards finding centralized optimal path solution. These centralized optimal-path finding solutions were suitable for application specific traditional WSNs environments. The cutting edge sensor enabled smart environments supporting heterogender applications require distributed optimal path finding solutions for green communication. In this context, this paper proposes a genetic algorithm enabled distributed zone approach for green communication. Specifically, instead of searching the optimal path solution in the whole network, the proposed algorithm identifies path in a small search space called distributed forward zone. The concept of forward zone enhances the searching convergence speed and reduces the computation centric communication cost. To encode the distributed routing solutions, variable length chromosomes are considered focusing on the target distributed area. The genetic algorithm enabled distributed zone approach prevents all the possibilities of forming the infeasible chromosomes. Crossover and truncation selection together generate a distributed path finding solution. To validate the experimental results with analytical results, various mathematical models for connectivity probability, expected end-to-end delay, expected energy consumption, and expected computational cost have been derived. The simulation results show that the proposed approach gives the high-quality solutions in comparison to the state-of-the-art techniques including Dijkstra's algorithm, compass routing, most forward within radius, Ahn-Ramakrishna's algorithm and reliable routing with distributed learning automaton (RRDLA).Kumar, S.; Kumar, V.; Kaiwartya, O.; Dohare, U.; Kumar, N.; Lloret, J. (2019). Towards green communication in wireless sensor network: GA enabled distributed zone approach. Ad Hoc Networks. 93:1-17. https://doi.org/10.1016/j.adhoc.2019.1019031179

A Survey on Layer-Wise Security Attacks in IoT: Attacks, Countermeasures, and Open-Issues

© 2021 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).Security is a mandatory issue in any network, where sensitive data are transferred safely in the required direction. Wireless sensor networks (WSNs) are the networks formed in hostile areas for different applications. Whatever the application, the WSNs must gather a large amount of sensitive data and send them to an authorized body, generally a sink. WSN has integrated with Internet-of-Things (IoT) via internet access in sensor nodes along with internet-connected devices. The data gathered with IoT are enormous, which are eventually collected by WSN over the Internet. Due to several resource constraints, it is challenging to design a secure sensor network, and for a secure IoT it is essential to have a secure WSN. Most of the traditional security techniques do not work well for WSN. The merger of IoT and WSN has opened new challenges in designing a secure network. In this paper, we have discussed the challenges of creating a secure WSN. This research reviews the layer-wise security protocols for WSN and IoT in the literature. There are several issues and challenges for a secure WSN and IoT, which we have addressed in this research. This research pinpoints the new research opportunities in the security issues of both WSN and IoT. This survey climaxes in abstruse psychoanalysis of the network layer attacks. Finally, various attacks on the network using Cooja, a simulator of ContikiOS, are simulated.Peer reviewe

Integrating Wireless Sensor Networks and Mobile Ad-hoc NETworks for enhanced value-added services

In some situations where the standard telecommunication infrastructure is not available, Mobile Ad hoc NETworks (MANETs) can be deployed to provide the required communication. These networks are established "on the fly" without a need for prior communication organization and are composed of autonomous mobile devices, such as cell phones, PDAs or laptops. In similar conditions, such as in emergency response operations, integrating MANETs and Wireless Sensor Networks (WSNs) can notably enhance the MANET participant's end-user experience. WSNs sense and aggregate ambient information, such as physiological, environmental or physical data related to a nearby phenomenon. The integration, which provides end-user availability to WSN required information, is feasible via gateways. However, when the ambient information collected by WSNs is intended for applications residing in MANETs, centralized and fixed gateways are not practicably feasible. This is mainly due to ad-hoc nature, lack of centralized control and constraints on the end-user devices that are used in MANETs. These devices are usually limited in power and capacity and cannot host centralized gateways. In this thesis we exploit the integration of WSN and MANET in order to provide novel value-added services which enhance the end-user experience of MANET participants. Motivating scenarios are introduced, background information is presented, requirements are derived and the state of the art regarding the integration of WSN with existing networks, including MANETs, is evaluated. Based on the evaluation, none of the existing solutions satisfies all of our derived requirements. Therefore, we propose an overall two-level overlay architecture to integrate WSNs (with mobile sinks) and MANETs. This architecture is based on the distributed gateway and applications which form the P2P overlays. Overlays are application-layer networks which are created on top of the exiting MANET. To interconnect gateway and application overlays we derive corresponding requirements and evaluate the existing approaches. Since none of these approaches fulfills all of our requirements, we propose protocols, mechanisms and design corresponding modules for the interconnection of overlays. Finally we refine our overall architecture based on the interconnection aspects. As a proof of concept, we implement a prototype for the inter-overlay information exchange. This implementation is based on SIP extensions and uses two existing P2P middlewares. We also simulate our prototype using Oversim simulation tool and collect experimental results. Based on these results, we can see that our architecture is a valid and promising approach for interconnecting different P2P overlays and can be deployed to provide the overall solution for WSN and MANET integrated system

A Vision and Framework for the High Altitude Platform Station (HAPS) Networks of the Future

A High Altitude Platform Station (HAPS) is a network node that operates in the stratosphere at an of altitude around 20 km and is instrumental for providing communication services. Precipitated by technological innovations in the areas of autonomous avionics, array antennas, solar panel efficiency levels, and battery energy densities, and fueled by flourishing industry ecosystems, the HAPS has emerged as an indispensable component of next-generations of wireless networks. In this article, we provide a vision and framework for the HAPS networks of the future supported by a comprehensive and state-of-the-art literature review. We highlight the unrealized potential of HAPS systems and elaborate on their unique ability to serve metropolitan areas. The latest advancements and promising technologies in the HAPS energy and payload systems are discussed. The integration of the emerging Reconfigurable Smart Surface (RSS) technology in the communications payload of HAPS systems for providing a cost-effective deployment is proposed. A detailed overview of the radio resource management in HAPS systems is presented along with synergistic physical layer techniques, including Faster-Than-Nyquist (FTN) signaling. Numerous aspects of handoff management in HAPS systems are described. The notable contributions of Artificial Intelligence (AI) in HAPS, including machine learning in the design, topology management, handoff, and resource allocation aspects are emphasized. The extensive overview of the literature we provide is crucial for substantiating our vision that depicts the expected deployment opportunities and challenges in the next 10 years (next-generation networks), as well as in the subsequent 10 years (next-next-generation networks).Comment: To appear in IEEE Communications Surveys & Tutorial

Routing in Large Scale tactical mobile ad hoc Networks

The current Transformation of the military networks adopts the MANET as a main component of the tactical domain. Indeed, a MANET is the right solution to enable highly mobile, highly reactive and quickly deployable tactical networks. Many applications such as the Situational Awareness rely on group communications, underlying the need for a multicast service within the tactical environment where the MANET is employed as a transit network. The purpose of this thesis is to study the setting up of an optimal multicast service within this tactical environment. We firstly focus on defining the protocol architecture to carry out within the tactical network paying particular attention to the MANET. This network is interconnected with different types of networks based on IP technologies and implementing potentially heterogeneous multicast protocols. The tactical MANET is supposed to be made of several hundred of mobile nodes, which implies that the scalability is crucial in the multicast protocol architecture choice. Since the concept of clustering proposes interesting scalability features, we consider that the MANET is a clustered network. Thereby, we define two multicast routing protocols adapted to the MANET: firstly STAMP that is in charge of the multicast communications within each cluster and secondly SAFIR that handles multicast flows between the clusters. These two protocols that can be implemented independently, act in concert to provide an efficient and scalable multicast service for the tactical MANET. Then, we study the interoperability of these multicast protocols employed within the MANET with those employed in the heterogeneous networks that it is interconnected with in order to guarantee end-to-end seamless multicast services to users. Finally, since the multicast protocols proposed in this thesis rely on underlying unicast routing protocols, we propose, in the last chapter, a scalable unicast routing protocol based on OLS